IBM BladeCenter S 7779 Manual de usuario

IBM BladeCenter S

Types 7779 and 8886

Power Modules



IBM BladeCenter S

Types 7779 and 8886

Power Modules



Note

Note: Before using this information and the product it supports, read the general information in

Notices; and read the IBM Safety Information and the IBM Systems Environmental Notices and User

Guide on the IBM Documentation CD.

Sixth Edition (July 2013)

US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract

with IBM Corp.

Contents

Chapter 1. BladeCenter S chassis power

modules ..............1

Power modules .............2

Chapter 2. Installation guidelines ....5

System reliability guidelines .........5

Handling static-sensitive devices........6

Chapter 3. Installing a power module . . 7

Chapter 4. Removing a power module . . 9

Appendix A. Power cords.......11

Power cords - C14 power module .......11

Power cords - C20 power module .......13

Appendix B. IBM Statement of Limited

Warranty Z125-4753-09 08/2006 ....15

Part 1 - General Terms...........15

Part 2 - Country-unique Terms ........19

Part3-Warranty Information ........29

Notices ..............33

Trademarks ..............33

Important notes .............34

Particulate contamination..........35

Documentation format...........36

Telecommunication regulatory statement ....36

Electronic emission notices .........36

Federal Communications Commission (FCC)

statement ..............36

Industry Canada Class A emission compliance

statement ..............37

Avis de conformité à la réglementation

d'Industrie Canada ...........37

Australia and New Zealand Class A statement . 37

European Union EMC Directive conformance

statement ..............37

Germany Class A statement ........37

Japan VCCI Class A statement .......38

Japan Electronics and Information Technology

Industries Association (JEITA) statement....39

Japan Electronics and Information Technology

Industries Association (JEITA) statement....39

Korea Communications Commission (KCC)

statement ..............39

Russia Electromagnetic Interference (EMI) Class

A statement .............39

People's Republic of China Class A electronic

emission statement ...........39

Taiwan Class A compliance statement ....40

Index ...............41

iv BladeCenter S Types 7779 and 8886: Power Modules

Chapter 1. BladeCenter S chassis power modules

A minimum of two power modules must be installed in power module bays 1 and

2 on the rear of the BladeCenter S chassis. Additional power modules, if installed,

are installed in power module bays 3 and 4.

Power modules

The BladeCenter S system supports up to four autoranging power modules that

are capable of supporting either 110 V ac or 220 V ac.

Power module

AC power LED

DC power LED

Fault LED

There are two types of power modules. These power modules are identical except

for the power cord connector; one power module has a C14 connector and the

other power module has a C20 connector. Both types of power modules can be

installed in the same chassis.

Table 1. Power modules used in the BladeCenter S system

Power module with C14 connector

C14 connector

Power module with C20 connector

C20 connector

Within the BladeCenter S chassis, all power supplies are combined into a single

power domain, which distributes power to each of the blade servers and modules

through the system midplane.

2BladeCenter S Types 7779 and 8886: Power Modules

You must install a minimum of two power modules. If you install only two power

modules, install them in power module bays 1 and 2 (the top and bottom power

module bays on the right as you face the rear of the BladeCenter S chassis).

Note: You must install all four power modules if you are using both disk storage

modules.

If you disengage or remove all devices from the front of the BladeCenter S chassis

(media tray, blade servers, and disk storage modules), the power modules will be

disabled.

Indicators and controls

There are three LEDs on each power module:

AC power

Lit (green). Power is being supplied to the power module.

DC power

Lit (green). Power is being supplied from the power module to the

BladeCenter S chassis midplane.

Fault Lit (amber). There is a fault with the power module.

Note: Before unplugging the AC power cord from the power module or

removing the power module from the BladeCenter S chassis, verify that the

capacity of the remaining power modules are sufficient to meet the

minimum power requirements for all components in the BladeCenter S

chassis. You can view power status and requirements through the

advanced management module.

For information on accessing and using the advanced management

module, see the Advanced Management Module User's Guide.

1. Verify that the power modules are properly connected to an AC power

source. All power modules in the BladeCenter S chassis must be

connected to the same power input voltage (either 110 V ac or 220 V

ac). Do not mix power input voltages.

2. Unplug the AC power cord from the power module and plug it in

again.

3. Reseat the power supply.

4. Swap the AC power cord with a power cord that is known to be

working.

5. Move the power module to another power module bay in the

BladeCenter S chassis.

Chapter 1. BladeCenter S chassis power modules 3

4BladeCenter S Types 7779 and 8886: Power Modules

Otros manuales para BladeCenter S 7779

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Servidor de IBM

IBM

IBM x3350 - System - 4192 Manual de usuario

IBM

IBM HS21 XM BLADECENTER - L5408 FOR SPEC CPU2006 Manual

IBM

IBM p5 590 Manual de usuario

IBM

IBM AS/400e Manual de usuario

IBM

IBM OpenPower 720 Guía de instalación

IBM

IBM Security SiteProtector System SP4001 Manual de usuario

IBM

IBM 6C4 Manual de usuario

IBM

IBM eserver iSeries 270 Manual de usuario

IBM

IBM BladeCenter HS22 Manual de usuario

IBM

IBM X3850 X6 Manual de usuario

IBM

IBM x3500 M3 7380 Manual de usuario

IBM

IBM PC Server 520 Manual de instrucciones

IBM

IBM BladeCenter JS12 Manual de usuario

IBM

IBM OpenPower 710 Manual de usuario

IBM

IBM 150 Hoja de información del producto

IBM

IBM System x3250 4364 Manual de usuario

IBM

IBM Netfinity 7600 Hoja de información del producto

IBM

IBM Eserver xSeries 360 Type 8686 Hoja de información del producto

IBM

IBM 6219 - IntelliStation M - Pro Manual de usuario

IBM

IBM BladeCenter QS20 Manual de usuario

IBM

IBM 419452u - Servers System X3250 M2 Xeon... Manual de usuario

IBM

IBM Power System System E950 Manual de usuario

IBM

IBM Network Station E Series Instrucciones de uso

IBM

IBM RS/6000 7025 F50 Series Manual de usuario

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario