IBM SelectaDock II Manual de usuario
IBM ThinkPad
SelectaDock II
User's Guide
IBM ThinkPad
SelectaDock II
User's Guide
IBM
Note
Before using this information and the product it supports, be sure to read the general information in
Appendix D.
First Edition (August 1996)
The following paragraph does not apply to the United Kingdom or any country where such
provisions are inconsistent with local law:
INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION “AS IS”
WITHOUT ANY WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE LIMITED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. Some states do not allow disclaimer or express or implied warranties in certain transactions;
therefore, this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically
made to the information herein; these changes will be incorporated in new editions of the publication. IBM
may make improvements or changes in the products or the programs described in this publication at any
time.
Requests for technical information about IBM products should be made to your IBM Authorized Dealer or
your IBM Marketing Representative.
Some parts of this manual are taken or adopted from the Adaptec EZ-SCSI documentation with
permission from Adaptec, Inc. IBM Corporation has rights and responsibility for this manual.
Copyright International Business Machines Corporation 1996. All rights reserved.
Portions of this manual are Copyright 1993, 1996 Adaptec, Inc. All rights reserved.
Note to U.S. Government Users — Documentation related to restricted rights — Use, duplication or
disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corp.
Contents
Information Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi
Electrical Safety Notices ......................... vi
About This Book ............................ ix
Chapter 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 1
Standard Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Unpacking the Box ............................ 5
Locating the Features .......................... 6
SelectaDock II Status Indicators ................... 11
Chapter 2. Using the SelectaDock System ........... 13
Setting Up Your ThinkPad System .................. 14
Attaching or Removing the SelectaDock Base to or from the
Docking Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Modes of Operation .......................... 23
Configuring the Computer for Docking and Undocking ...... 25
Cold Docking and Undocking ..................... 26
Hot or Warm Docking and Undocking ................ 28
Chapter 3. Installing and Removing Options .......... 33
Handling Internal Options ....................... 34
Installing or Removing a Drive in the UltraBay Tray ........ 35
Installing or Removing a Drive in the 1-Inch-High Drive Space . 44
Installing or Removing a Drive in the Half-Height Drive Space .. 49
Installing or Removing the PCI/ISA Adapter Card ......... 54
Installing or Removing a PC Card .................. 59
Using the MIDI/Joystick Port ..................... 61
Connecting External SCSI Devices ................. 63
Releasing the Latch .......................... 64
IDE Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Chapter 4. Using the Security Features ............. 67
Using the Security Key Lock ..................... 68
Securing the SelectaDock Docking System with the MicroSaver
Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Chapter 5. Setting Up for Sharing a SelectaDock System .. 73
Overview of Sharing a System .................... 74
Setup Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Copyright IBM Corp. 1996 iii
Chapter 6. Using the SCSI Controller .............. 79
Assigning SCSI IDs .......................... 80
Terminating the SCSI Port ...................... 80
SCSI Software Support ........................ 81
Chapter 7. Solving Problems . . . . . . . . . . . . . . . . . . . 83
Isolating a Problem Unit ........................ 85
Attention Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
How to Run Tests ........................... 92
Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . 94
Getting Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Appendix A. Tips, Hints, and Limitations ........... 109
Drive Letters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Selecting Startup Drives ....................... 110
Using a Diskette Drive ........................ 113
Using Multiple Configurations for DOS .............. 113
If Multiple Configurations Are Not Supported ........... 114
Operating System Hints ....................... 114
Parameter Consideration for the Socket Service ......... 115
I/O Address for the Game Port ................... 115
Adapter Connector for Ethernet Adapter Card .......... 115
Limitations for Using ISA or PCI Adapter Option Cards ..... 116
Limitations for Suspend and Resume Functions ......... 116
Wrapping Around Cables ...................... 117
Using Windows NT .......................... 117
Turning the Computer and the SelectaDock Docking System On
and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Charging the Battery Pack of the Computer ........... 117
Limitations for Allocating I/O Resources X'330' to X'333'.. 117
Appendix B. Using the SCSI Support Software ....... 119
Installing EZ-SCSI for Windows .................. 121
Installing EZ-SCSI for DOS ..................... 122
Reinstalling Adaptec EZ-SCSI ................... 123
Viewing More Online Information .................. 124
Formatting Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Appendix C. Specifications . . . . . . . . . . . . . . . . . . . 137
Physical Characteristics . . . . . . . . . . . . . . . . . . . . . . . 137
iv IBM ThinkPad SelectaDock II User's Guide
Environmental Requirements . . . . . . . . . . . . . . . . . . . . 138
Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . 139
External Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . 139
IBM Power Cords ........................... 140
Appendix D. Product Warranty, Notices, and Statements . 143
Federal Communications Commission (FCC) Statement .... 148
Canadian Department of Communications Compliance Statement 148
Avis de conformité aux normes du ministère des
Communications du Canada ................... 149
European Community (EC) Directive Conformance Statement . 149
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Contents v
Information Notices
This user's guide contains notices that relate to specific information or
text.
DANGER
Indicates situations that are potentially lethal or extremely hazardous
to you. It appears in text
before
the instruction or situation that could
be dangerous.
CAUTION
Indicates situations that are potentially hazardous to you. It also
appears in text
before
the instruction or situation that could be
hazardous.
ATTENTION
Indicates possible damage to programs, devices, system, or data. An
attention notice appears before the related instruction or situation in
which possible damage could occur.
Important
Provides important information or guidelines that you should be aware
of.
Note
Provides hints, tips, guidance, or advice.
Electrical Safety Notices
DANGER
Before you install or remove the option, unplug the power cord.
vi IBM ThinkPad SelectaDock II User's Guide
DANGER
Power is controlled by the power switch of the computer. In an
emergency, turn off the power by unplugging the SelectaDock II
power cord. The electrical outlet should be near the SelectaDock
II and should be easily accessible.
DANGER
To avoid a shock hazard:
Do not connect or disconnect any cables or perform
installation, maintenance, or reconfiguration of this product
during an electrical storm.
The power cord must be connected to an outlet that has been
properly wired and grounded according to your local wiring
rules.
This equipment must have an earth ground.
Apparaten skall anslutas till jordat uttag när den ansluts till ett
nätverk.
Jordet stikkontakt skal benyttes når apparatet tilkobles
datanett.
Laite on liitettävä maadoitettuun pistorasiaan.
Any equipment to which this product is attached to must also
be connected to an outlet that has been properly wired and
grounded according to your local wiring rules.
Contents vii
DANGER:
The power cord must be used with a properly grounded outlet.
Electrical current from power, telephone, and communication
cable is hazardous. To avoid shock hazard, connect and
disconnect cables as shown below when installing, moving, or
opening the covers of this product or attached the devices.
Turn everything OFF.
Turn everything OFF.
First, attach all cables to devices. First, remove the power cord from
the outlet.
Attach the signal cables to
receptacles.
Remove signal cables from
receptacles.
Attach the power cord to an outlet.
Remove all cables from devices.
Turn the device ON.
Note: In the U.K., by law, the
telephone line cable must be
connected after the power cord.
Note: In the U.K., by law, the
power cord must be disconnected
after the telephone line cable.
To Connect To Disconnect
viii IBM ThinkPad SelectaDock II User's Guide
Otros manuales para SelectaDock II
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Accesorios para portátiles de IBM
