IBEX TS52 Manual de usuario
QUICK START GUIDE
2022-1.0 IBEX EQUIPMENT CO
TS52 Power Harrow
IMPORTANT
READ
BEFORE
FIRST USE
QUICK START GUIDE
2022-1.0 IBEX EQUIPMENT CO
TS52 Power Harrow
ASSEMBLY TIPS
The 3-point hitch frame does
not install easily unless the
components near it are
loosened to create slack.
First, remove the 8 bolts (#56)
that secure the gearbox support
frame.
Loosen the 12 bolts (not shown
in diagram) that secure the two
supports (#4 and #5) to the
frame cover (#1).
Unscrew and remove the 6 bolts
that secure the bracket (#7) to
the supports (#4) and (#5).
Insert the 3-point hitch frame
(#3) in position, install and
tighten all bolts and the
installation is complete.
Note: though it may appear that the leveling blade was not included with the
machine, it is partially hidden if it ships installed in the rear position, behind the
tines. The leveling blade can be detached and reinstalled in front if desired.
As with any new implement, the shaft that attaches to the tractor may need to be
cut to length. Consult the included Ibex Equipment PTO Shaft Cutting Guide.
Tabla de contenidos
Otros manuales de Maquinaria agrícola de IBEX
IBEX
IBEX TS106 Manual de usuario
IBEX
IBEX TX80 Manual de usuario
IBEX
IBEX TX40 Manual de usuario
IBEX
IBEX TX51 2 Wheel Rake Manual de usuario
IBEX
IBEX TX31 Manual de usuario
IBEX
IBEX TM60 Manual de instrucciones
IBEX
IBEX TX31 Manual de usuario
IBEX
IBEX TS53 Manual de usuario
IBEX
IBEX TX31 Manual de usuario
IBEX
IBEX TX31 Manual de usuario
Manuales populares de Maquinaria agrícola de otras marcas
GSi
GSi PNEG-2314 Manual de usuario
Checchi & Magli
Checchi & Magli TEXDRIVE Manual de usuario
Amazone
Amazone Cenius 4003-2TX Manual de usuario
MASSEY FERGUSON
MASSEY FERGUSON MF 9313S Manual de usuario
Cima
Cima BLITZ Instrucciones de funcionamiento y mantenimiento
Amazone
Amazone CombiDisc 3000 Instrucciones de instalación
