IBASE Technology SI-642 Manual de usuario
SI-642
4K Signage Player
with Intel® HD Graphics 620
User’s Manual
Version 1.0
(February 2021)
ii SI-642 User Manual
Copyright
© 2021 IBASE Technology, Inc. All rights reserved.
No part of this publication may be reproduced, copied, stored in a retrieval system, translated
into any language or transmitted in any form or by any means, electronic, mechanical,
photocopying, or otherwise, without the prior written consent of IBASE Technology, Inc.
(hereinafter referred to as “IBASE”).
Disclaimer
IBASE reserves the right to make changes and improvements to the products described in
this document without prior notice. Every effort has been made to ensure the information in
the document is correct; however, IBASE does not guarantee this document is error-free.
IBASE assumes no liability for incidental or consequential damages arising from
misapplication or inability to use the product or the information contained herein, nor for any
infringements of rights of third parties, which may result from its use.
Trademarks
All the trademarks, registrations and brands mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of their respective
owners.
SI-642 User Manual ii
i
Compliance
In a domestic environment, this product may cause radio interference in which case
users may be required to take adequate measures.
This product has been tested and found to comply with the limits for a Class B
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with manufacturer’s instructions, may cause
harmful interference to radio communications.
WEEE
This product must not be disposed of as normal household waste, in
accordance with the EU directive of for waste electrical and electronic
equipment (WEEE - 2012/19/EU). Instead, it should be disposed of by
returning it to a municipal recycling collection point. Check local
regulations for disposal of electronic products.
Green IBASE
This product is compliant with the current RoHS restrictions and
prohibits use of the following substances in concentrations exceeding
0.1% by weight (1000 ppm) except for cadmium, limited to 0.01% by
weight (100 ppm).
• Lead (Pb)
• Mercury (Hg)
• Cadmium (Cd)
• Hexavalent chromium (Cr6+)
• Polybrominated biphenyls (PBB)
• Polybrominated diphenyl ether (PBDE)
iv SI-642 User Manual
Important Safety Information
Carefully read the precautions before using the device.
Environmental conditions:
Lay the device horizontally on a stable and solid surface in case the device may
fall, causing serious damage.
Leave plenty of space around the device and do not block the openings for
ventilation. NEVER DROP OR INSERT ANY OBJECTS OF ANY KIND INTO
THE VENTIILATION OPENINGS.
Use this product in environments with ambient temperatures between 0˚C and
45˚C.
DO NOT LEAVE THIS DEVICE IN AN ENVIRONMENT WHERE THE
STORAGE TEMPERATURE MAY IS BELOW -20° C OR ABOVE 80° C. This
could damage the device. The device must be used in a controlled environment.
Care for your IBASE products:
Before cleaning the device, turn it off and unplug all cables such as power in case
a small amount of electrical current may still flow.
Use neutral cleaning agents or diluted alcohol to clean the device chassis with a
cloth. Then wipe the chassis with a dry cloth.
Vacuum the dust with a computer vacuum cleaner to prevent the air vent or slots
from being clogged.
WARNING
Attention during use:
Do not place heavy objects on the top of the device.
Operate this device from the type of power indicated on the marking label. If you
are not sure of the type of power available, consult your distributor or local
power company.
Do not walk on the power cord or allow anything to rest on it.
If you use an extension cord, make sure that the total ampere rating of the
product plugged into the extension cord does not exceed its limits.
Avoid Disassembly
Do not disassemble, repair or make any modification to the device. Doing so could
generate hazards and cause damage to the device, even bodily injury or property
damage, and will void any warranty.
SI-642 User Manual
v
CAUTION
There is danger of explosion if internal lithium-ion battery is replaced by an incorrect
type. Replace only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
Warranty Policy
IBASE standard products:
24-month (2-year) warranty from the date of shipment. If the date of shipment
cannot be ascertained, the product serial numbers can be used to determine
the approximate shipping date.
3rd-party parts:
12-month (1-year) warranty from delivery for the 3rd-party parts that are not
manufactured by IBASE, such as CPU, CPU cooler, memory, storage devices,
power adapter, panel and touchscreen.
＊ PRODUCTS, HOWEVER, THAT FAIL DUE TO MISUSE, ACCIDENT,
IMPROPER INSTALLATION OR UNAUTHORIZED REPAIR SHALL BE
TREATED AS OUT OF WARRANTY AND CUSTOMERS SHALL BE BILLED
FOR REPAIR AND SHIPPING CHARGES.
Technical Support & Services
1. Visit the IBASE website at www.ibase.com.tw to find the latest information about
the product.
2. If you need any further assistance from your distributor or sales representative,
prepare the following information of your product and elaborate upon the
problem.
Product model name
Product serial number
Detailed description of the problem
The error messages in text or in screenshots if there is any
The arrangement of the peripherals
Software in use (such as OS and application software, including the version
numbers)
3. If repair service is required, you can download the RMA form at
http://www.ibase.com.tw/english/Supports/RMAService/. Fill out the form and
contact your distributor or sales representative.
vi SI-642 User Manual
TableofContents
Chapter 1 General Information ............................................................. 1
1.1Introduction ............................................................................................... 2
1.2Features ................................................................................................... 2
1.3Packing List .............................................................................................. 3
1.4Specifications ........................................................................................... 3
1.5Product View ............................................................................................ 5
1.6Dimensions ............................................................................................... 7
Chapter 2 Hardware Installation & Motherboard Information .............. 8
2.1Installation / Replacement ........................................................................ 9
2.1.1Memory .................................................................................... 11
2.1.2Mini-PCIe & M.2 Cards ............................................................ 12
2.1.3WiFi / 3G / 4G Antenna Installation ......................................... 12
2.2Setting the Jumpers ................................................................................ 13
2.3Jumper & Connector Locations on Motherboard .................................... 14
2.4.5Pin Assignment for COM1 RS-232 Port ................................................. 16
Chapter 3 Driver Installation ................................................................. 17
3.1Introduction ............................................................................................. 18
3.2Intel® Chipset Software Installation Utility ............................................... 18
3.3VGA Driver Installation ........................................................................... 20
3.4HD Audio Driver Installation ................................................................... 22
3.5LAN Driver Installation ............................................................................ 24
3.6Intel® Management Engine Components Drivers Installation ................. 26
3.7Intel® Serial IO Drivers Installation ......................................................... 28
SI-642 User Manual vi
i
Chapter 4 BIOS Setup ............................................................................ 30
4.1Introduction ............................................................................................. 31
4.2BIOS Setup ............................................................................................. 31
4.3Main Settings .......................................................................................... 32
4.4Advanced Settings .................................................................................. 32
4.5Chipset Settings ..................................................................................... 45
4.6Security Settings ..................................................................................... 50
4.7Boot Settings .......................................................................................... 52
4.8Save & Exit Settings ............................................................................... 53
Appendix ...................................................................................................... 54
A.I/O Port Address Map ............................................................................. 55
B.Interrupt Request Lines (IRQ) ................................................................ 57
1
Chapter 1
General Information
The information provided in this chapter includes:
Features
Packing List
Accessories
Specifications
Product View
Dimensions
2 SI-642 User Manual
1.1 Introduction
The SI-642-N is a 4K digital signage player that leverages the 8th Gen Intel® Core™
U-series processors. The platform can be installed in restaurant as a menu board
player or used in commercial establishments to increase brand awareness and
customer engagement or deployed in transportation networks to provide real-time
information and advertising relevant to the traveler.
The fanless SI-642-N offers high performance and high reliability for 24/7 operation in
an industrial-grade design. It is integrated with the IBASE iSMART and Observer
technologies for remote monitoring, power on/off scheduling, power recovery and low
temperature boot functions. With the Intel HD Graphics 620, the system can
simultaneously support two independent displays (1x HDMI 2.0 & 1x Active
DisplayPort 1.2) with 4K (4096 x 2160) @60Hz resolution as well as two independent
audio outputs.
The SI-642-N houses the MBD642 motherboard populated with dual Gigabit LAN, 4x
USB 3.1, dual channel DDR4 with up to 32GB support and expansion slots including
M.2 3042 B-key for 4G/LTE, M.2 2280 M-key for storage and M.2 2240 E-key to
install optional WiFi or capture cards. It also has the Intel vPro and TPM 2.0 features
to deliver increased productivity, remote manageability and data security.
1.2 Features
iSMART energy-saving & Observer remote monitoring technologies
8th Gen Intel® Core™ U-series processor
1x HDMI 2.0 + 1x Active DisplayPort 1.2 with independent audio output
2x DDR4 2400 SO-DIMM, dual channel, Max. 32GB
1x M.2 B-Key (3042) for 4G LTE
1x M.2 M-key (2280) for storage
1x M.2 E-key (2230) for WiFi or capture card option
TPM 2.0, vPro and watchdog timer
Slim & compact fanless design
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Placa giratoria de IBASE Technology
