i3 International Ax49 Manual de usuario
Ax49, Ax50, Ax51-series
User Guide
Before attempting to connect or operate this product, read these instructions carefully.
Save this manual for future use.
CONTENTS
1. Warnings and operation notes..........................................3
2. Product Overview ............................................................4
3. Unpacking....................................................................5
4. Installation.....................................................................6
5.
Connecting your IP Camera to the SRX-Pro Server.....
....10
6. Advanced Camera Setup..................................................17
7. Specifications.................................................................30
2
i3-TRNG-CAMS-Ax49/Ax50/Ax51.indd Rev. 141120
Ax49/Ax50/Ax51-series User Guide
COPYRIGHT ©2012 by i3 International, Inc. All rights reserved.
No part of this manual may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including but not limited to, photocopying,
recording, or by any information storage or retrieval system, without the prior
written permission of the copyright owner and the publisher.
Ax49/Ax50/Ax51 is a registered trademark of i3 International Inc.
Disclaimer
This quick start guide is provided as is, without warranty of any kind, expressed or
implied, including but not limited to performance, merchantability, or fitness for any
particular purpose. Neither i3 International Inc. nor its dealers or distributors shall be
liable to any person or entity with respect to any liability, loss, or damage, caused or
alleged to have been caused directly or indirectly by this information.
Furthermore, i3 International Inc. reserves the right to revise this publication, and to
make changes to the content at any time, without notice.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Address:
i3 International Inc.
780 Birchmount Road, Unit 16
Scarborough, ON M1K 5H4
Canada
Contact us:
Tech Support: 1.877.877.7241
Web Site: www.i3international.com
Table of Contents
1. Warnings and operation notes
2. Product Overview
3. Unpacking
4. Installation
5. Configuration
6. Advanced Camera Setup
7. Specifications
3Rev. 141120i3-TRNG-CAMS-Ax49/Ax50/Ax51.indd
1. Warnings and operation notes
Thank you for purchasing i3 Ax49/Ax50/Ax51 camera.
If the system needs to be modified or repaired, contact a certified i3 International
Dealer/Installer. When serviced by unauthorized technician, the system warranty
will be voided. Should you have any problems or questions regarding our products,
contact your local i3 International Dealer/Installer.
1.1 Precautions
Installation and serving should be performed only by qualified and
experienced technicians to conform to all local codes and to maintain
your warranty.
When installing your Ax49/Ax50/Ax51 camera be sure to avoid:
• excessive heat, such as direct sunlight or heating appliances
• contaminants such as dust and smoke
• strong magnetic fields
• sources of powerful electromagnetic radiation such as radios or TV transmitters
• moisture and humidity
• areas with mechanical vibrations
• fluorescent lamps or objects that reflect light
• unstable light sources as this may cause flickering
• temperatures below -10° Celsius or 14° Fahrenheit and above 50° Celsius or
122° Fahrenheit.
WARNING! The use of CSA certified/ UL Listed Class 2 power
adapter is required to ensure compliance.
WARNING! To reduce the risk of fire or electric shock, do not
expose the product to rain or moisture.
4
i3-TRNG-CAMS-Ax49/Ax50/Ax51.indd Rev. 141120
1.2 Power Supply
Ensure the supplied voltage meets the power consumption requirements of this
camera before powering the camera on. Incorrect voltage may cause irreparable
damage to the video camera and will effectively void the camera warranty.
1.3 Cleaning
• For maximum optical clarity, the camera or lens must remain clean. Use a soft,
dry cloth to remove finger prints and dust from the dome cover.
• Use a blower to remove dust from the lens.
• Clean the body with a soft, dry cloth. If it is very dirty, use a cloth dampened
with a small quantity of neutral detergent, then wipe dry.
• Do not use volatile solvents such as alcohol, benzene, or thinners, as they may
damage the surface finish.
1.4 Servicing
To avoid electrical shock and to preserve the product warranty, DO NOT
disassembles the camera. Refer servicing to qualified personnel only.
2. Product Overview
• High Definition Images
Clear and detailed HD quality images in all conditions. Unlike other megapixel
cameras, AX49-50-51-series offer higher resolutions and better frame rates.
Blurry images are reduced and individuals and objects of interest come with
perfect clarity.
• Triple Streaming
The AX49-50-51-series Network Camera is designed to show extreme image
detail. H.264/MPEG4/MJPEG triple streaming allows you to choose the
appropriate code for your bandwidth.
• Cost-saving H.264 Support
The AX49-50-51-series support the H.264 compression standard. H.264 greatly
reduces the size of video without compromising image quality. Storage and
bandwidth are reduced.
5Rev. 141120i3-TRNG-CAMS-Ax49/Ax50/Ax51.indd
3. Unpacking
Before You Begin Please read this guide carefully before you install the
dome camera. Keep this guide for future reference.
Check that the items received match those listed on the order form and packing slip.
The dome camera packing box includes, in addition to this manual:
1. Flat Head Screw (Machine Type) x4
2. Flat Head Screw (Tapping Type) x4
3. Plastic Anchor x4
4. Plastic Mounting Button x4
5. Rubber Feet x4
6. Guide Pattern Sticker x1
7. Printed Quick Start Guide x1
8. CD (User Manual, Annexxus Finder) x1
9. RJ45 Female / Female Coupler x1
10. Fully Assembled Network Dome Camera x1
1234 5 6
If any parts are missing or damaged, contact the dealer you purchased the camera
from.
6
i3-TRNG-CAMS-Ax49/Ax50/Ax51.indd Rev. 141120
4. Installation
Use the appropriate brackets and equipment to mount the camera. After installing
the camera, your network camera should be accessed from your local network.
4.1 Dimensions
4.2. Camera Parts and Definitions
• Power In: (Red+/Black-): power connector, DC12V/AC24V
Note: This connector is absent on Ax49D/Ax50D cameras.
• RJ-45 Ethernet Connector: network connection.Supports PoE (Power over
Ethernet) cable.
Note: If PoE (Power over Ethernet) connector is used, an electrical cable is not
required
• BNC: video output
Power In (Red+/Black-)
(absent on Ax49D/Ax50D)
RJ-45 Ethernet Connector
BNC
7Rev. 141120i3-TRNG-CAMS-Ax49/Ax50/Ax51.indd
• Reset: use an appropriate tool to press the button to reset the camera (Hold
for 5 seconds to reboot the camera. Hold longer than 5 seconds to load default
settings)
4.3 Ceiling mount and Wall mount Installation
1. Adhere the “Guide Pattern Sticker” to the desired location on the mounting
surface and mark hole positions.
2. Drill 4 mounting holes and 1 cable entry hole on the mounting surface according
to the guide sticker.
3. Secure the metal plate to the ceiling using the appropriate screws.
Use machine type screws if you are attaching the camera to a pendant mount.
Use tapping type screws for all other surfaces.
4. For cement surfaces, insert the Plastic Anchors into the holes. For softer sur-
faces, do not use the Plastic anchors.
5. Use the Rubber Feet for surface mounting.
Tapping
Type
Screws
Plastic
Anchors
8
i3-TRNG-CAMS-Ax49/Ax50/Ax51.indd Rev. 141120
4.4 Adjusting the Camera Position
1. Remove the screw on the base of the camera. (a.)
2. Rotate the dome counter clockwise to unlock and pull free of the housing.
3. Remove the inner liner by gently pulling it free of the two notches in the
housing.
9Rev. 141120i3-TRNG-CAMS-Ax49/Ax50/Ax51.indd
4. Adjust the tilt of the camera as necessary.
5. Adjust the pan of the camera as necessary.
Note: Maintain tilt at 75 degrees or less to avoid distortion. See the image
below to locate the distortion angle of the camera.
10
i3-TRNG-CAMS-Ax49/Ax50/Ax51.indd Rev. 141120
5. Connecting your IP Camera to the SRX-Pro Server
5.2 Camera Connection Options
5.3 Hardware/Software Requirements
The following requirements must be met to achieve a successful network connection
with the Ax49/Ax50/Ax51 IP camera.
SRX-Pro Server:
• i3 SRX-Pro Version 2.0 or higher
• Windows XP, XPe or 7 Pro or 7e
• Internet Explorer Version 6.0 or later
• CPU: Intel Pentium Core 2 or higher
• Memory: 1GB or more
• VGA card--supporting Direct X 9.0 or above
Power Supply
Your camera requires a DC12V/AC24V/PoE power supply. Make sure to use the
correct power supply before connecting to this network camera. Use a RJ45
network connector to connect the camera to your computer or hub switch.
Remember, If PoE (Power over Ethernet) connector is used, an electrical cable is not
required
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Cámara IP de i3 International
i3 International
i3 International Ax46 Series Manual de usuario
i3 International
i3 International i3-B731 Manual de usuario
i3 International
i3 International i3-B73X Series Manual de usuario
i3 International
i3 International Ax48DC2 Manual de usuario
i3 International
i3 International Ax57R Manual de usuario
i3 International
i3 International Ax73RM Manual de usuario
i3 International
i3 International Ax41B1MVR Manual de usuario
i3 International
i3 International Ax45RM series Manual de usuario
i3 International
i3 International i3B265i Manual de usuario
