I-Tech DA001 Manual de instrucciones
1CD
monitorDA001OSDoperation
l-TECH
COMPANY
i-Tech
CompanyLLC
TOLLFREE:(888)483-24' 8• EMAIL:[email protected]m• WEB:www.iTechLCD.com
Safety Instruction
Read and follow these instructions when connecting and using your LCD monitor:
Operation:
1.
Keep the monitor out of direct sunlight and away from stoves or any other heat source.
2.
Remove any object that could fall into ventilation holes or prevent proper cooling of the
monitor’s electronics.
3.
Do not block the ventilation holes on the cabinet.
4.
When positioning the monitor, make sure the power plug and outlet are easily accessible.
5.
If turning off the monitor by detaching the power cable or DC power cord, wait for
seconds before attaching the power cable or DC power cord for normal operation.
6.
Do not subject the LCD monitor to severe vibration or high impact conditions during
operation.
7.
Do not knock or drop the monitor during operation or transportation.
Maintenance:
8.
To protect your display from possible damage, do not put excessive pressure on the LCD
panel. When moving your monitor, grasp the frame to lift; do not lift the monitor by placing
your hand or fingers on the LCD panel.
9.
Unplug the monitor if you are not going to use it for an extensive period of time.
10.
Unplug the monitor if you need to clean it with a slightly damp cloth. The screen may be
wiped with a dry cloth when the power is off. However, never use organic solvent, such as,
alcohol, or ammonia-based liquids to clean your monitor.
11.
To avoid the risk of shock or permanent damage to the set, do not expose the monitor to
dust,
rain, water, or excessive moisture environment.
12.
If your monitor gets wet, wipe it with dry cloth as soon as possible.
13.
If foreign substance or water gets in your monitor, please turn the power off immediately
and
disconnect the power cord. Then, remove the foreign substance or water, and send it to
the
maintenance center.
14.
Do not store or use the LCD monitor in locations exposed to heat, direct sunlight or extreme
cold.
15.
In order to maintain the best performance of your monitor and use it for a longer lifetime,
please use the monitor in a location that falls within the following temperature and
humidity
ranges. Temperature: 5-35°C 41-95°F
Product Installation
1. Switch off the power on both your monitor and your computer. The Power
Switch is located in the right of the monitor.
2. Connect the power cord to the AC outlet, and connect the power to the
monitor through the AC/DC adapter.
3. VGA Signal-Plug one end of the 15-pin signal cable to the video signal connector at
the rear of the PC system and the other end to the monitor. Secure the connectors
with the screws on the cable connector at both ends.
4. (Optional) DVI Signal-Plug one end of the DVI signal cable to the video signal
connector at the rear of the PC system and the other end to the monitor. Secure the
connectors with the screws on the cable connector at both ends.
5. (Optional) HDMI Signal-Plug one end of the HDMI signal cable to the video signal
connector at the rear of the PC system and the other end to the monitor. Secure the
connectors with the screws on the cable connector at both ends.
6. (Optional) RS232 Connection- Plug one end of RS232 cable to com-port
connector on your PC system and the other end to the monitor. Secure the
connectors with the screws on the cable connector at both ends.
ControlFunctions
TheMonitorcontrolfunctionsarelocatedonthelowersideofthepanel.
Thecontrolkeydescription
1.
MENUActivatetheon-screen-displayfunction
2.
V Down/ Brightnesscontrol
3.A : Up/ Brightnesscontrol
4.
AutoAUTO-ADJUSTMENT
5.it)PowerSwitch
Description
1.
Menu
PresstheMenukeytoactivatetheonscreendisplayscreen.Itisa togglekey.Presstwiceto
turnofftheOSD.After30sec.idletime,theOSDscreenwillautomaticallyturnoff.
2.
V & A : Selectkey
Thetwokeyshavetwosetsoffunctions:
>WhenOSDscreenisnotactivated,thetwokeysare
usedtoadjusttheBacklight.
>WhenOSDscreenisactivated(When"Menu"keyispressed),thetwokeysareused
toselectthewantedadjustmentitems
3.Auto
PressAutoKeytogettheoptimizedquality.
4.O : Powerswitch
UsethepowerswitchtoturnONorOFFpower.Werecommendturningyoursystempoweron
first,thentheLCDmonitor.
ADJUSTING THE MONITOR
The LCD monitor is designed to work with a range of compatible video adapters on the market. Due to
the possible deviations between these video adapters, you may make some adjustment to fit the monitor
for adapter used.
ADJUSTMENT PROCEDURE
First, you must activate the OSD screen through pressing the MENU key, the screen will show in the
center of screen as below:
OSD SCREEN
Use the ∇& ∆key to select the required adjustment item up or down.
Use Menu key to do the desired function or go into the second menu item to do the further
change.
Use the ∇& ∆key to select the Exit item to turn off OSD. Or After 30 sec. idle time, the
OSD screen will automatically turn off.
AUTO-ADJUSTMENT
WE STRONGLY RECOMMEND THAT YOU USE THIS ITEM TO GET
THE OPTIMIZED VISUAL QUALITY.
Use the ∇& ∆key to select auto-adjustment, and then press Menu Key to get the optimized
quality.
Or press Auto Key to get the optimized directly.
BRIGHTNESS ADJUSTMENT
Use the ∇& ∆key to select the Brightness item, press Menu Key to change the
brightness value.
Use the ∇& ∆key to adjust the Brightness.
Then press menu key to confirm.
ADJUST THE CONTRAST VALUE
Use the ∇& ∆key to select the CONTRAST item, then press Menu Key to get the best
contrast optimization.
Use the ∇& ∆key to adjust contrast value.
Screen Settings
Use the ∇& ∆key to select the Screen Settings item, then press Menu Key to get the
best Screen Settings optimization.
H.Position
Use the ∇& ∆key to select the H.Position item, then press Menu Key to get the best
optimization.
Use the ∇& ∆key to adjust H.Position value.
Then press menu key to confirm.
V.Position
Use the ∇& ∆key to select the V.Position item, then press Menu Key to get the best
optimization.
Use the ∇& ∆key to adjust V.Position value.
Then press menu key to confirm.
Clock
Use the ∇& ∆key to select the Clock item, then press Menu Key to get the best
optimization.
Use the ∇& ∆key to adjust increase or decrease video H Size of the picture.
Then press menu key to confirm.
Phase
Use the ∇& ∆key to select the Phase item, then press Menu Key to get the best
optimization.
Use the ∇& ∆key to adjust increase or decrease video Quality of the picture.
Then press menu key to confirm.
Color Temperture
Use the ∇& ∆key to select the Color Temp item, then press Menu Key to get the
language selection.
Use the ∇& ∆key to select the adjust the display color of the picture.
Use the ∇& ∆key to select temperature 9300K, 7500K and 6500K of the picture.
User Color
Use the ∇& ∆key to select User Color, then press Menu Key to get the best color
optimization.
Use the ∇& ∆key to select Red, Green & Blue to adjust the display user color of the picture.
Auto Gain
Use the ∇& ∆key to select Auto Gain, then press Menu Key to get the best color
optimization that will be activated the auto adjusting input video color level for the picture.
sRGB
Use the ∇& ∆key to select SRGB, then press Menu Key to get the best color optimization.
Language Setting
Use the ∇& ∆key to select the Language item, then press Menu Key to get the
language selection.
Use the ∇& ∆key to select the Language.
Then press Menu key to confirm.
OSD Setting
Use the ∇& ∆key to select the OSD Setting item, then press Menu Key to get the
OSD setting selection.
You could set up the property of Position, Display Timer, and Transparency of OSD menu.
Volume
Use the ∇& ∆key to select the Volume item, then press Menu Key to get the Volume
setting.
Use the ∇& ∆key to select Volume and mute on/off.
Use menu key to select Mute on / off
Then select Exit to the last page.
Recall
Use the ∇& ∆key to select the Recall item, then press Menu Key to get the default
setting.
Tabla de contenidos
Otros manuales de Hardware de red de I-Tech
Manuales populares de Hardware de red de otras marcas
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manual de usuario
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manual de usuario
Yudor
Yudor YDS-16 Manual de usuario
D-Link
D-Link ShareCenter DNS-320L Manual de usuario
Samsung
Samsung ES1642dc Instrucciones de uso
Honeywell Home
Honeywell Home LTEM-PV Instrucciones de montaje
