
Take handwritten notes
The Mobile NoteTaker Pro provides two working modes:
Off-line and On-line mode to take handwritten notes or
drawings.
Off-line Mode
The off-line mode enables you to capture and store
important notes in meetings, conferences or lectures.
a. Press and hold the ON/OFF
button to power on the unit.
b. Hold the base unit and gently
press all paper clippers
together.
c. Slide the base unit into the
paper's upper edge and attach
the base unit to the paper.
d. Pick up the digital pen and start writing. (NOTE: Be
careful to hold the pen in a way that does not block signals
sent from the tip of the pen to the receiver unit.)
e. Once you've completed one page, shortly press the
ON/OFF button to save current page and start a new page
. On the base unit screen, you can see the page number
added by one.
All notes are stored in the base unit. You can upload them to
a PC for viewing, editing, or email.
On-line Mode
The Mobile NoteTaker Pro also
works when
it
is
in connection
with PC, which is called On-line
mode. In the On-line mode, you
can upload notes from the base
unit to PC, write notes or draw
pictures with the digital pen just
as you do in off-line mode.
-10-
Use the device in connected mode
The digital pen can also acts as a mouse with features like
hovering, left and right click. Additionally, there are some
special features to be used only with the On-line mode.
Those features will be described in details in the followed
chapters.
Before you connect the device to a PC, first make sure to
install the NoteTaker manager application included in the
CD and run it.
IMPORTANT
NOTICE
~
Do not connect more than one set of this device
at the same time. That may cause interference
with each other.
Installing Note Taker software
1. Insert the installation CD into your CD ROM drive.
The setup program should start automatically. If not, run
the program by selecting 'Run' from the Windows 'Start'
menu and type in D:\setup.exe. If your CD drive uses a
different letter, type that letter instead of D.
2. Follow the instructions on the screen.
3. Once installation is complete, automatic driver
installation will start. Please follow the steps during this
process.
4. After the installation process, when running the
application for the 1st time, a new folder named "My
Notes," is created in your "My Documents" directory. All
your notes will be saved into this directory. In the event
that no "My Documents" directory is found, the installation
process will create a new "My Documents" folder on your
C hard drive. The 'My Notes' folder will then be created
under this directory. If you uninstall, upgrade or reinstall
the software in a different location, the note files will
remain in this directory, and will not be overwritten.
-11-