i-box Run4 Manual de usuario
Portable Battery Base For Amazon Echo Dot 4
Tragbarer Batterieboden für Amazon Echo Dot 4
Base de batería portátil para Amazon Echo Dot 4
Base rechargeable portable pour l’Echo Dot 4 d’Amazon
Base batteria portatile per Amazon Echo Dot 4
Draagbare accubasis voor Amazon Echo Dot 4
Amazon Echo Dot 4 not supplied.
Run | 02www.iboxstyle.com
EN Introduction
Set your Amazon Echo Dot 4 free with the i-box Run4
Portable Battery Base.
Simply place your Amazon Echo Dot 4 into the Run4,
plug in the connectors and you’re good to go.
Important - Please read these instructions fully before
installing or operating your speaker.
Keep away from flame sources such as lit candles.
Do not expose to dripping or splashed fluids.
Objects filled with liquids, such as vases, must not
be placed close to the speaker.
The unit should not be exposed to direct sunlight,
very high or low temperature, moisture, vibrations,
strong magnetic fields, high frequencies and
dusty environments.
Caring for your Speaker
Important Safety Information
03 | Run
Do not place the product in enclosed bookcases or racks
without proper ventilation. Ventilation should not be
impeded by covering the ventilation openings with items,
such as newspapers, table-cloths, curtains, etc.
Never attempt to insert wires, pins or other such objects
into the vents or openings of the unit.
Do not disassemble or modify the battery base, there are
no user serviceable parts.
If the battery base is damaged in anyway or malfunctions
do not use. Consult a qualified service engineer.
Do not use abrasives, benzene, thinner or other solvents
to clean the surface of the unit. To clean, wipe with clean
soft cloth and a mild detergent solution.
Do not dispose of this product with household waste
at the end of its life cycle; hand it over to a collection centre
for the recycling of electrical and electronic appliances.
This product contains a Li-Polymer battery and should
be disposed of appropriately. Do not dispose of it with
household waste at the end of its life cycle; hand it over
to a collection centre for the recycling of electrical and
electronic appliances with batteries. By recycling, some
of the materials can be reused. You are making an
important contribution to protect our environment. Please
check with your Local Authority for recycling advice.
Run | 04www.iboxstyle.com
1. Safety information
Safety information 2-3
2. Getting to know your
Run4 Battery Base
Controls and features 5
3. Getting started
Inserting your Echo Dot 4 6
Connecting your Echo Dot 4 7
Powering the Run4 8
Charging the Run4 9
4. Other Information
Specifications 10
Disclaimer 10
Declaration of conformity 10
Technical support 10
05 | Run
Getting to know your Battery Base
Your i-box Run4 is very simple to set up, but before we get into that please be sure to read
through the safety information on pages 2-3.
Now lets have a quick look at some of the important bits.
Controls & Features
1. Power Button
2. Echo Dot
connection cable
3. DC Input
4. 3.5mm Jack port
5. LED Indicators
1
4
2
3
5
Run | 06www.iboxstyle.com
Inserting your Echo Dot (not supplied)
Place your Echo Dot 4 into the Run4 battery base as shown, aligning the connection port
with the cable.
07 | Run
Connecting your Echo Dot
Once the Echo Dot 4 has been inserted, connect the cable (3) to the Echo Dot
as shown below.
Run | 08www.iboxstyle.com
Powering up the Run4
Press and hold the power button (1) on the back of the battery base for 2 seconds to power
up the Run4. Repeat this process to turn the power off.
Press the power button (1) once to highlight the battery power. This must be done while
the Run4 is switched on. The number of LEDs (5) that are lit up on the front, indicate how
much power is left in the battery.
1
5
09 | Run
Charging the Run4
Use the power adaptor supplied with your Echo Dot to charge the Run4. Connect to the
DC input (3).
The Run4 will be fully charged and ready to go once all 4 LEDs (6) on the front are fully lit.
(Charge time: 3-4hrs)
Run | 10www.iboxstyle.com
Specifications
Power Input: 12V𝌂1.25A
Power Output: 12V𝌂1.25A
USB Output: 5V𝌂2.1A
Charge Time: 3-4hrs
Battery: Li-Polymer
Battery Capacity:
10,000mAh (included)
Battery Voltage: 3.7V
Run Time: Up to 12hrs
(Subject to volume level)
Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore some
of the instructions, specifications and pictures in this documentation may differ slightly
from your particular situation. All items described in this guide are for illustration purposes
only and may not apply to your particular situation. No legal right or entitlements may be
obtained from the description made in this manual.
Declaration of conformity
Hereby, Philex Electronic Ltd. declares that the radio equipment: model Run4 Portable
Battery Base for Amazon Echo Dot for radio broadcast reception in domestic premises
is in compliance with the Radio Equipment Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet
address: www.philex.com/doc
Technical support
For further help, advice, information or live chat visit
www.iboxstyle.com
Waste electrical and electronic products should
not be disposed of with household waste.
Please recycle where facilities exist.
Check with your Local Authority for recycling advice.
Tabla de contenidos
Idiomas:
