HYPERVIBE G17 PRO Manual de usuario
1
HYPERVIBE PRO
OWNERS MANUAL
Hypervibe G17 PRO Owners Manual
2
Contents
Introduction 4
Gravity Resistance Training (GRT) 5
Benets of GRT 6
Instruction Manual 7
Important Product Safety Instructions 8
Grounding instructions 10
Places to avoid 11
Places to look for 11
Important Health Precautions 12
Machine Assembly 14
Step 1 14
Step 2 14
Parts List 14
Quick Fix - Twist-Lock Anchor System 16
Instructions 17
Safe & Eective Use 18
Intensity (G-Force) 18
Time 19
Exercise 19
Getting Started 21
SOFTWARE GUIDE 22
Screen Modes 22
Display Mode 22
Setting the Clock 23
Sound On/O 24
Home Screen 25
3
Manual Mode Overview 27
Manual Mode - Quick Start 27
Manual Mode - Preset 29
Manual Mode - Starting 31
Manual Mode - Paused 33
Manual Mode - Complete 35
Program Mode Overview 36
Program Mode - Menu 37
Program Mode - Sub Menu 38
Program Mode - Starting 40
Program Mode - Pause 42
Program Mode - Rest 43
Phases 44
Program - Complete 45
Specications 46
Maintenance 47
Troubleshooting 48
Hypervibe G17 PRO Owners Manual
4
Introduction
Congratulations on your purchase of the HyperVibe - G17 Pro,
Gravity Resistance Training machine. The G17 Pro is the result of
years of technical experience and health expertise, brought to-
gether to bring you the most advanced home & clinical use vibra-
tion platform the world has ever seen.
All vibration machines fall into one of two categories, Pivotal or
Lineal, which refers to the motion of the vibrating platform. Hyper-
Vibe uses Pivotal vibration technology for maximum comfort and
benets, however since the technology was rst introduced to-
wards the end of the last century, very little has changed. Hyper-
Vibe saw lots of room for improvement. The G17 Pro has an im-
proved vibration prole compared to traditional pivotal machines,
to become more user friendly, more eective and allow a wider
range of exercises. The G17 PRO brings power, style, and intel-
ligence together via a beautiful colour LCD display which guides
users through a wide range of pre-installed programs.
In another progression from previous products, the G17 Pro is the
world’s rst machine to show G-Force readings on the user inter-
face, corresponding to a Low, Medium, and High position on the
platform. G-Force is the key to vibration intensity, and for most
benets, the key to getting results. Yet other machines don’t pro-
vide you with this crucial information, often it’s not even provided
in the technical specications.
5
Gravity Resistance Training (GRT)
There is a wide spread myth about Whole Body Vibration originat-
ing in Russia during the 70’s and used for the health of their cos-
monauts and the performance of their olympic athletes. The reali-
ty is that modern Whole Body Vibration began in Germany during
the mid-nineties. The pioneering machines were very powerful
and designed to increase the gravitational forces acting on a user
by applying rapid pulses of vertical force under the users feet,
triggering a range of responses and benets. Over the years as
more manufacturers started to release less powerful Whole Body
Vibration platforms, the original concept became somewhat lost.
Gravity Resistance Training refers to the actual training principle
by which users of a Whole Body Vibration platform experience
tremendous benet to their muscles, bones, and bodies. What
sets apart a GRT machine from a regular vibration machine, is its
ability to produce high levels of gravity (acceleration), just like the
pioneering technology from Germany. In simple terms, this means
that the platform’s upward vertical force can simulate more than
10 times the strength of Earth’s gravity.
While manufacturers of low powered machines attempt to use
smoke and mirrors, we at Hypervibe focus on the reality of Whole
Body Vibration technology and what sets it apart from other ap-
proaches to health and tness. We focus on its ability to provide
true Gravity Resistance!
After all, is not Gravity the force we ght against everyday in our
lives. Is not our failure to ght gravity responsible for many of the
physical issues we face? No matter how you look at it, the fun-
damental need to maintain our ability to counter gravity is what
denes our strength, stability, balance, function, and most im-
portantly, our healthy lifestyle. It’s time to stop just shaking the
Hypervibe G17 PRO Owners Manual
6
body and begin to actually improve its performance and integrity.
It’s time for Whole Body Vibration to become Gravity Resistance
Training.
Benefits of GRT
At the time this was written, the eects of GRT had been studied
for almost 20 years, with hundreds of clinical papers published in
scientic journals.
Improved Balance
Improved Bone Density
Increased Muscle Strength
Increased Circulation
Increased Flexibility
Improved Body Composition
Improved Hormonal Prole
Cellulite Reduction
Increased Muscle Power
Pre-Exercise Warm-Up
Improved Exercise Recovery
Lower Back Pain Relief
Joint Protection
Reduced Swelling
Neurological Stimulation
Treatment Of Systemic Conditions
7
NEITHER HYPERVIBE NOR ITS REPRESENTATIVES CAN AC-
CEPT RESPONSIBILITY FOR ANY DAMAGE OR INJURY IN-
CURRED AS A RESULT FROM INFORMATION PRESENTED IN
THIS MANUAL EXCEPT UNDER THE TERMS OF THE PROD-
UCT WARRANTY.
Instruction Manual
Familiarise yourself with this manual and look it over carefully. Be
sure you understand the control panel operation and the safe ex-
ercise positions before using the G17 PRO. This manual includes
basic information on starting an exercise program and safety tips
that will assist you in reaching your goals for a healthy lifestyle.
!
Hypervibe G17 PRO Owners Manual
8
Important Product Safety Instructions
Danger: When using an electrical appliance, basic precautions
should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.
To reduce risk of burns, re, electrical shock or injury to persons:
1. Always ensure proper operation of your HyperVibe, it is recom-
mended that your HyperVibe machine be connected to a dedi-
cated 110V 60Hz electrical circuit. DO NOT USE ELECTRICAL
EXTENSION CORDS OR POWER ADAPTORS.
2. Always unplug this appliance from the electrical outlet immedi-
ately after using and before cleaning.
3. An appliance should never be left unattended when plugged
in. Unplug from outlet when not in use and before putting on or
taking o parts.
• Do not operate under blanket or pillow. Excessive heating
can occur and cause re, electric shock or injury to persons.
• Close supervision is necessary when this appliance is used
by, on or near children, invalids or disabled persons.
• Use this appliance only for its intended use as described in
this manual. Do not use attachments not recommended by
this manufacturer.
• Never operate this appliance if it has a damaged cord or plug,
if it is not working properly, if it has been dropped or dam-
aged or dropped into water. Return the appliance to a service
!
9
center for examination and repair.
• Do not carry this appliance by supply cords or use cord as a
handle.
• Keep the cord away from heated surfaces.
4. Never operate the appliance with the air openings blocked.
Keep the air openings free of lint, hair and the like.
5. Never drop or insert any object into any opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used
or where oxygen is being administered.
8. To disconnect, turn all controls to the o position then remove
plug from outlet.
9. Avoid sprinkling water or cleaning the unit with a wet sponge.
10. Always unplug the power cord before cleaning the machine.
Use a damp cloth and immediately follow with a clean dry cloth.
WARNING – Connect this appliance to a properly grounded
outlet only. See Grounding Instructions.
!
Hypervibe G17 PRO Owners Manual
10
Grounding instructions
This product must be grounded. If it should malfunction or break-
down, grounding provides a path of least resistance for elec-
tric current to reduce the risk of electric shock. This product is
equipped with a cord having an equipment-grounding conductor
and a grounding plug. The plug must be plugged into an appro-
priate outlet that is properly installed and grounded in accordance
with all local codes and ordinances.
DANGER - Improper connection of the equipment-grounding
conductor can result in a risk of electric shock. Check with a
qualied electrician or serviceman if you are in doubt as to
whether the product is properly grounded. Do not modify the
plug provided with the product. If it will not t the outlet, have
a proper outlet installed by a qualied electrician.
This product is for use on a nominal 120V circuit and has a ground-
ing plug that looks like the plug illustrated in sketch A in Figure 1.
Make sure that the product is connected to an outlet having the
same conguration as the plug. No adapter should be used with
this product.
!
GROUNDING PIN
GROUNDED
OUTLET
METAL
SCREW
TAB FOR
GROUNDING SCREW
ADAPTER
GROUNDING METHODS
A B
Figure 1
Tabla de contenidos
