Hygger HG028 Manual de usuario

Otros manuales de Acuario de Hygger

Hygger

Hygger HG-969 Manual de usuario

Manuales populares de Acuario de otras marcas

AquaLighter

AquaLighter Aquascape Manual de usuario

EHEIM

EHEIM 600 T Manual de usuario

Red Sea

Red Sea REEFER XL300 Manual de usuario

AutoAqua

AutoAqua Smart Stir SS-100 Manual de usuario

eKoral

eKoral eKoral Pro Manual de usuario

fish mate

fish mate F14 Manual de usuario

JBL

JBL PRO SILENT S-100 Manual de usuario

Amtra

Amtra VEGA Manual de usuario

JBL

JBL CRISTALPROFI i60 greenline Manual de usuario

Aquatlantis

Aquatlantis Tecatlantis EASY LED UNIVERSAL 2.0 Manual de usuario

Innovative Marine

Innovative Marine MightyJet 8500 Mini Instrucciones de funcionamiento

SuperFish

SuperFish Planty 25 Guía de instalación

Royal Exclusiv

Royal Exclusiv Bubble King DeLuxe 300 Manual de usuario

Sera

Sera Marin Precision Biotop LED Cube 130 Manual de usuario

Commodity Axis

Commodity Axis ViaAqua Titanium Heater Manual de usuario

Sander

Sander Ozonizer P 2000 Manual de usuario

Hagen

Hagen HALF MOON Manual de usuario

CPR

CPR CS150 Manual de usuario

USER MANUAL

MODEL:HG026

MODEL:HG028

2.HG026 PRODUCT PARAMETERS AND INSTRUCTION

(1)Unpack the box and check if the light and other accessories are included. If missing

parts, please contact the seller.

(2)Install the Holder onto the edge of the aquarium and secure it with the screws. The

Holder must be secured ﬁrmly enough to prevent the light from falling into the water.

(3)Position the ﬁxture over the hole of the "Holder" by adjusting the "Stand bar" to a proper

height so that it can securely hold the ﬁxture in place.

(4)Connect the power supply with the light, then plug it in. Ensure a drip loop is created

before the outlet as shown in the warning.

3.HG028 PRODUCT PARAMETERS AND INSTRUCTION

(1)Unpack the box and check if the light and other accessories are included. If missing

parts, please contact the seller.

(2)Expand both sides’ metal bracket ﬁt to match the length of your aquarium.

(3)Connect the power supply with the light, then plug it in. Ensure a drip loop is created

before the outlet as shown in the warning.

If you encounter the following situation:

1.Your phone can't connect to the APP light

2. Connect to a new mobile device

Please plug and unplug the DC supply three times, each time with an

interval of 10 seconds.

After the indicator blinks for three times, the device is reset successfully

and ready for pairing.

FOR HG028 RESET

FOR HG026 RESET

2.After 10 seconds, unplug and

plug in the connector between

the light and the power adapter

3 times

3.Then wait for a few seconds, the

light will ﬂash, at this time, the light

has been reset and can be found by

TUYA APP

1.Plug in the power adapter

12 3

unplug and

plug in 3 times

09

SOLUTION 1:

If power failure or going out, causing the APP connection to be disconnected.

Step1. In the Doodle APP interface directly drop down to update.

SOLUTION 2:If power failure or going out, causing the APP connection

to be disconnected. Tthere is no need to reset the operation, just turn on

the Bluetooth again and click on the main doodle interface to refresh it.

The default value is 3 minutes.