Huvitz HS-7500 Manual de usuario

-----------------------

--------------------------------------------------------------

SLIT LAMP HS

Operator’s Manual

SLIT LAMP MICROSCOPE HS

SLIT LAMP HS

-------------------

------------------------------------------------------ ------

MPORTANT NOTICE

WARNING

Potential electromagnetic or other interference between medical equipments and other

devices being operated together in the same environmental may expert an adverse

influence on f

unctioning of the medical equipment.

Non

medical equipments not in

compliance with the requirements of EN 60601

1 and EN 60601

2 should not be

used together in the same environmental as the medical equipments

This equipment has been tested and found t

o comply with the limits for medical devices in

IEC 60601

2:2001.

These limits are designed to provide reasonable protection against

harmful interference in a typical medical installation

Power Cord

For use of equipment in rated voltage less than 125V

ac,minimum 6A,Type SJT or SVT ,

18/3AWG,10A, max 3.0m long : One end with Hospital Grade Type, NEMA 5

15P Other

end with appliance coupler. For use of equipment in rated voltage less than

250Vac,minimum 6A,Type SJT or SVT , 18/3AWG,10A, max 3.0m long : One

end

terminatesd with blade attachment plug(HAR) Type, NEM A 6

15P.

This product may malfunction due to electromagnetic waves caused by portable personal

telephones, transceivers, radio

controlled toys, etc. Be sure to avoid having objects such as,

which a

ffect this product, brought near the product.

The information in this publication has been carefully checked and is believed to be entirely

accurate at the time of publication. HUVITZ assumes no responsibility, however, for possible

errors or omissions, o

r for any consequences resulting from the use of the information

contained herein.

-----------------------

--------------------------------------------------------------

SLIT LAMP HS

HUVITZ reserves the right to make changes in its products or product specifications at any

time and without prior notice, and is not required to update this documentation t

o reflect such

changes.

HUVITZ Co., Ltd.

689

3, Geumjeong

dong, Gunpo

si, Gyeonggi

do,

435

862, Republic of Korea

All rights are reserved.

Under copyright laws, this manual may not be copied, in whole or in part, without the prior

written con

sent of HUVITZ Co., Ltd.

Document

Number: 9000ENGJ301

SLIT LAMP HS

-------------------

------------------------------------------------------ ------

Contents

Introduction

................................

.......

Safety Information

................................

..............................

Features & Operating Condition

................................

......

Standard Components

................................

.....................

Accessories

................................

.....

Composition

................................

....

Installation

................................

.......

Trial Operations

................................

...............................

Main Features

................................

10.

Ordinary Maintenance

................................

......................

1.1.

Indication for use

...........................

1.2.

Classification

................................

............................

2.1.

Introduction

................................

..............................

2.2.

Safety Symbols

................................

........................

2.3.

Environment factors

................................

................

2.4.

Safety Precautions

................................

..................

3.1.

Brief Description

................................

.....................

3.2.

Operating Condition

................................

................

7.1.

Assembling the Instrument

................................

......

오류

책갈피가

정의되어

있지

않습니다

-----------------------

--------------------------------------------------------------

SLIT LAMP HS

11.

EMC Information

................................

..............................

Electric Diagram

................................

...............................

13.

Technical Specifications

................................

..................

14.

Service Information

................................

..........................

10.1.

Halogen Projection bulb

................................

..........

10.2.

Protection fuses replacement

................................

...

10.3.

Cleaning & Disinfection

................................

...........

11.1.

Guidance and manufacturer’s declaration

–

electromagnetic emissio

......

11.2.

Guidance and manufacturer’s declaration

–

electromagnetic immunity

.......

11.3.

Guidance and manufacturer’s declaration

–

electromagnetic immunity

.......

11.4.

Recommended separation distances between portable and mobile RF

communications equipment and the EUT

................................

..............................

11.5.

Immunity and Compliance Level

................................

..............................

11.6.

Guidance and manufacturer’s declaration

–

electromagnetic immunity

.......

15. Particular

Information

………………………………………………………………………

..48

SLIT LAMP HS

-------------------

------------------------------------------------------ ------

Introduction

1.1.

Indication for use(intended use)

1.2.

Classification

CAUTION

The SLIT LAMP, HS

7500 is intended for use in eye examination of the ant eye

segments, from the cornea epithelium to the posterior capsule. It is used to aid

in the

diagnosis of diseases or trauma which affect the structural properties of the anterior

eye segment.

Protection against electric shock: Class I

Applied Parts: Type B applied parts.

Protection against harmful ingress of water: Ordina

ry, IPX0

Degree of safety in the presence of a flammable anesthetics mixture with air

or with oxygen or with nitrous oxide: Not suitable for use in the presence of a

flammable anesthetics mixture with air or with oxygen or with nitrous oxide.

Mode of opera

tion: Continuous

Light Hazard protection Classification: Group 2 by ISO15004

2:2007

Stationary:

Do not try to move this equipment without help.

This microscope is

heavy and should maintain stationary. Always get two persons to help lift this

unit

Feder

al law restricts this device to sale by or on the order of a physician

-----------------------

--------------------------------------------------------------

SLIT LAMP HS

Safety Information

2.1.

Introduction

NOTE

WARNING

CAUTION

Safety is everyone

’

s responsibility. The safe use of this equipment is largely dependent

upon the installer, user, operator, and maintainer. It is im

perative that personnel study

and become familiar with this entire manual before attempting to install, use, clean,

service or adjust this equipment and any associated accessories. It is paramount that

the instructions contained in this manual are fully un

derstood and followed to enhance

safety to the patient and the user/operator. It is for this reason that the following safety

notices have been placed appropriately within the text of this manual to highlight safety

related information or information requi

ring special emphasis. All users, operators, and

maintainers must be familiar with and pay particular attention to all Warnings and

Cautions incorporated herein.

“

Warning

”

indicates the presence of a hazard that could result in severe personal injury,

death or substantial property damage if ignored

“

Note

”

describes information for the installation, operation, or maintenance of which is

important but hazard related if ignored.

“

Caution

”

indicates the presence of a hazard that could result i

n minor injury, or

property damaged if ignored.

SLIT LAMP HS

-------------------

------------------------------------------------------ ------

2.2.

Safety Symbols

Save this instruction

The International Electrotechnical Commission

(IEC) has established a set of symbols

for medical electronic equipment which classify a connection or warn of any potential

hazards. The classif

ications and symbols are shown below.

This applies only to the instrument that has the certification symbol printed explicitly on

the product label or sticker.

I and O on power switch represent ON and OFF respectively.

Type B I

solated patient connection.

This symbol identifies a safety note. Ensure you understand

the function of this control before using it. Control on

described in the appropriate User’s or Service Manual.

Identifies the point where the system saf

ety ground is

fastened to the chassis. Protective earth connected to

conductive parts of

Class I equipment for safety purposes.

Hot surface.

-----------------------

--------------------------------------------------------------

SLIT LAMP HS

UL60601

CAN/CSA C22.2

NO.601.1

MEDICAL EUIPMENT

WITH RESPECT TO ELECTRIC SHOCK

FIRE AND MECHANICAL H

AZARDS

ONLY IN ACCORDANCE WITH UL

60601

AND CAN/CSA

C22.2

NO.601.1

Disposal of your old appliance

When this crossed

out wheeled bin symbol is attached to a

product it means the product is covered by the European

Directive 2002/96/EC.

All electrical

and electronic products should be disposed of

separately from the municipal waste stream via designated

collection facilities appointed by the government or the local

authorities.

The correct disposal of your old appliance will help prevent

potential nega

tive consequences for the environment and

human health.

4. For more detailed information about disposal of your old

appliance, please contact your city office, waste disposal

service or the shop where you purchased the product.

Alternating Current

SLIT LAMP HS

-------------------

--------------------------------------------------------------

2.3.

Environment factors

Avoid the following environments for operation or storage:

Where the equipment is exposed to water vapor.

Don

’

t operate an equipment with a wet hand.

Where the equipment is exposed to direct sunlight.

Where the temperature cha

nges

extremely

Normal operating temperature range is from 10

C to 40

Humidity is from 30% to 75%.

Altitude is from 700 to 1060hpa

Where it is near the heat equipment.

Where the humidity is extremely high or there is a ve

ntilation

problem.

Where the equipment is subject to excessive shocks or

vibrations.

Tabla de contenidos

Otros manuales de Microscopio de Huvitz

Huvitz

Huvitz HS-7000 Manual de usuario

Huvitz

Huvitz HRM-300 Manual de usuario

Huvitz

Huvitz HS-5500 Manual de usuario

Huvitz

Huvitz HS-5000 SX Manual de usuario

Huvitz

Huvitz HSZ-600 Manual de usuario

Huvitz

Huvitz HS-5000 3X Manual de usuario

Huvitz

Huvitz HS-5000 5X Manual de usuario

Huvitz

Huvitz HS-5000 2X Manual de usuario

Huvitz

Huvitz HSZ-700 Manual de usuario

Manuales populares de Microscopio de otras marcas

Thermo Scientific

Thermo Scientific Nicolet iN10 Guía

National

National DC3-163 Manual de usuario

KERN Optics

KERN Optics OPE-1 Manual de usuario

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Manual de usuario

Prior

Prior Lux POL Manual de usuario

Opitec

Opitec Smartscoop 115615 Manual de usuario

KERN

KERN OPO-1 Manual de usuario

Topcon

Topcon SP-1P Manual de usuario

Motic

Motic PA43 Manual de usuario

Leica

Leica DVM5000 Guía del usuario

MshOt

MshOt MZ62 Manual de usuario

KERN Optics

KERN Optics OZR-5 Manual de usuario

VWR

VWR VisiScope 384 Series Manual de usuario

Nikon

Nikon ECLIPSE E200 POL Manual de usuario

Leica

Leica DI C800 Manual

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manual de usuario

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manual de usuario

Olympus

Olympus SZ61 Manual de usuario