Husqvarna CD48i Manual de usuario
English
Operator’s Manual
CD48i / 968999758 CD52i / 968999759
CD52L / 968999760 CD61L / 968999761
CD61B / 968999762 TRD48i / 968999767
TRD52i / 968999768 TRD61L / 968999769
TRD72L / 968999770
Please read the operator’s manual carefully and make sure you
understand the instructions before using the machine.
©2007 HTC. All rights reserved.
Beatrice, NE. Printed in U.S.A.
CONTENTS
INTRODUCTION...............................................................5
OPERATING.....................................................................5
Good Service..............................................................6
SYMBOLS AND DECALS.................................................7
SAFETY............................................................................9
Safety Instructions......................................................9
General Operation......................................................9
Personal Safety Equipment...................................... 11
Slope Operation........................................................ 11
Safe Handling of Gasoline........................................12
General Maintenance ...............................................13
Transport ..................................................................16
MAINTENANCE..............................................................17
Maintenance Schedule.............................................17
Deck belt...................................................................18
Cutting Blades ..........................................................19
Anti-scalp rollers.......................................................20
Cleaning....................................................................20
LUBRICATION................................................................21
TECHNICAL DATA..........................................................22
Torque Specifications................................................22
Conformity Certificates .............................................22
WARNING!
Failure to follow cautious operating practices can result in serious injury to the
operator or other persons. The owner must understand these instructions, and must
allow only trained persons who understand these instructions to operate the mower.
Each person operating the mower must be of sound mind and body and must not be
under the influence of any mind altering substance.
English-5
INTRODUCTION
Congratulations
Thank you for purchasing a Husqvarna deck. It is built for superior efficiency to rapidly mow primarily large areas..
This manual is a valuable document. Read the contents carefully before using or servicing the machine. The
following of instructions (use, service, maintenance, etc.) by all who operate this machine is important for the
safety of the operator and others. It can also considerably increase the life span of the machine and increase its
resale value.
If you sell your machine, be sure to give the operator’s manual to the new owner.
Operating
This machine is constructed only for mowing grass on lawns and even ground without obstacles such as stones,
tree stumps, etc. All other types of uses are incorrect. The manufacturer’s directions concerning operation,
maintenance, and repairs must be carefully followed.
Lawn mowers and all power equipment, can be potentially dangerous if used improperly. Safety requires good
judgement, careful use in accordance with these instructions and common sense.
The machine must only be operated, maintained, and repaired by persons familiar with the machine’s special
characteristics and who are also knowledgeable about the safety instructions. Use only approved repair parts to
maintain this machine.
Accident prevention regulations, other general safety regulations, occupational safety rules, and traffic regulations
must be followed without fail.
Unauthorized modifications to the design of the machine may absolve the manufacturer from liability for any
resulting personal injury or property damage.
English-6
Good Service
Husqvarna’s products are sold all over the world and only in specialized retail stores with complete service. This
ensures that you as a customer receive only the best support and service. Before the product is delivered, the
machine has, for example, been inspected and adjusted by your retailer. See the certificate in the Service Journal
in this operator’s manual.
When you need spare parts or support in service questions, warranty issues, etc., please consult the following
professional:
Manufacturing Number
The machine’s manufacturing number can be found on the printed plate affixed to the right rear of the deck.
Stated on the plate, from the top are:
The manufacturer’s type number (Model).• The machine’s type designation (I.D.).• The machine’s serial number (Serial no.)•
Please have the type designation and serial number available when ordering spare parts.
This Operator’s Manual belongs to the machine with
the manufacturing number: Engine Transmission
INTRODUCTION
COMBI DECK TUNNEL DECK
English-7
SYMBOLS AND DECALS
These symbols are found on the machine and in the operator’s manual.
Study them carefully so that you know what they mean.
Used in this publication to notify the reader of a risk of personal injury or death, particularly if the reader should
neglect to follow instructions given in the manual.
Used in this publication to notify the reader of a risk of material damage, particularly if the reader should neglect
to follow instructions given in the manual. Used also when there is a potential for misuse or misassembly.
WARNING!
Xxxx xxxxxx xxxxx xxxx
xxxxxxxxx xxxxxx xxxxxxxxx.
xx xxxxxxxx xxxx xxxxxx.
IMPORTANT INFORMATION
Xxxx xxxxxx xxxxx xxxx xxxxxxxxx
xxxxxx xxxxxxxxx. xx xxxxxxxx xxxx
xxxxxx.
Warning! CE conformity Warning! Rotating blades, Do not touch parts
marking. Only for keep away from the
European market discharge deck
Do not stand here Use protective glasses Use protective gloves
Noise emissions to the
surroundings in accordance
with the European Union’s
directive. The machine’s
emission is stated in the
chapter TECHNICAL DATA
and on the decals.
Only machines for European
market
English-8
SYMBOLS AND DECALS
Read Shut off engine and Keep a safe Use on slopes No passengers
Operator’s remove key before distance from no greater
Manual performing any the machine than 10°
maintenance or repair work
Whole body Severing of fingers Do not open or Careful backing up, Careful going
exposure to and toes remove safety watch for other forward, watch for
thrown objects shields while people other people
engine is running
Moving sharp blades under cover
English-9
SAFETY
Safety Instructions
These instructions are for your safety. Read them carefully.
IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING
OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN
SERIOUS INJURY OR DEATH.
General Operation
Read, understand, and follow all instructions• on the machine and in the manual before
starting.
Do not put hands or feet near rotating parts• or under the machine. Keep clear of the
discharge opening at all times.
Only allow responsible adults, who are familiar• with the instructions, to operate the machine.
Clear the area of objects such as rocks, toys,• wire, etc., which could be picked up and thrown
by the blades.
Be sure the area is clear of bystanders before• operating. Stop machine if anyone enters the
area.
Never carry passengers. The machine is only• intended for use by one person.
Do not mow in reverse unless absolutely• necessary. Always look down and behind
before and while backing.
Never direct discharged material toward• anyone. Avoid discharging material against a
wall or obstruction. Material may ricochet back
toward the operator. Stop the blades when
crossing gravel surfaces.
Do not operate machine without the entire• grass catcher, discharge guard, or other safety
devices in place and working
Slow down before turning.• Never leave a running machine unattended.• Always turn off blades, set parking brake, stop
engine, and remove keys before dismounting.
Disengage blades when not mowing. Shut• off engine and wait for all parts to come to a
complete stop before cleaning the machine,
removing the grass catcher, or unclogging the
discharge chute.
Operate machine only in daylight or good• artificial light.
Read the operator’s manual before starting the machine
Clear the area of objects before mowing
8011-512
8011-513
WARNING!
This symbol means that important safety instructions need to be emphasized.
It concerns your safety.
English-10
SAFETY
WARNING!
Engine exhaust and certain
vehicle components contain
or emit chemicals considered
to cause cancer, birth defects,
or other reproductive system
damage. The engine exhaust
contains carbon monoxide,
which is a odorless, colorless,
poisonous gas. Do not use the
machine in enclosed spaces.
8011-520
Never take passengers
Do not operate the machine while under the• influence of alcohol or drugs.
Watch for traffic when operating near or• crossing roadways.
Use extra care when loading or unloading the• machine into a trailer or truck.
Always wear eye protection when operating• machine.
Data indicates that operators age 60 years and• above are involved in a large percentage of
riding mower-related injuries. These operators
should evaluate their ability to operate
the riding mower safely enough to protect
themselves and others from serious injury.
Follow the manufacturer’s recommendation for• wheel weights or counterweights.
Anyone who operates this machine must first• read and understand this Operation Manual.
Local laws may regulate the age of the user.
Keep machine free of grass, leaves or other• debris buildup which can touch hot exhaust /
engine part and burn. Do not allow the mower
deck to plow leaves or other debris which
can cause buildup to occur. Clean any oil or
fuel spillage before operating or storing the
machine. Allow machine to cool before storage.
Este manual sirve para los siguientes modelos
8
Tabla de contenidos
Otros manuales de Cortacésped de Husqvarna
Husqvarna
Husqvarna LZ5227, LZ6130 Manual de usuario
Husqvarna
Husqvarna 96732410100 Manual de usuario
Husqvarna
Husqvarna CT160 Manual de usuario
Husqvarna
Husqvarna 532424761R1 Manual de usuario
Husqvarna
Husqvarna LTH1742 Manual de usuario
Husqvarna
Husqvarna MZ5424S Manual de usuario
Husqvarna
Husqvarna MZ52 Manual de usuario
Husqvarna
Husqvarna LR10 Manual de usuario
Husqvarna
Husqvarna Rider ProFlex 18 Manual de instrucciones
Husqvarna
Husqvarna 966582101 Manual de usuario
Husqvarna
Husqvarna Automower 535 AWD Manual de usuario
Husqvarna
Husqvarna RZ4623 Manual de usuario
Husqvarna
Husqvarna TS 142T Manual de usuario
Husqvarna
Husqvarna HU775H Manual de usuario
Husqvarna
Husqvarna AUTOMOWER 420 Manual de usuario
Husqvarna
Husqvarna CTH2038 Manual de usuario
Husqvarna
Husqvarna YTH151 Manual de usuario
Husqvarna
Husqvarna YTH24V54 Manual de usuario
Husqvarna
Husqvarna 96795370100 Manual de usuario
Husqvarna
Husqvarna CTH220TWIN Manual de usuario
Manuales populares de Cortacésped de otras marcas
TALEN TOOLS
TALEN TOOLS AVR HGM30 Manual de usuario
DEWEZE
DEWEZE ATM-725 Manual de operación
Weed Eater
Weed Eater 180083 Manual de usuario
Better Outdoor Products
Better Outdoor Products Quick Series Manual de usuario
Cub Cadet
Cub Cadet 23HP Z-Force 60 Manual de funcionamiento
MTD
MTD 795, 792, 791, 790 Manual de usuario
