Husqvarna 440e II Manual de usuario

EEnn

nngg

ggll

llii

iiss

sshh

440e II TrioBrake

445e II TrioBrake

Operator’s manual

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

2 1155361-95 Rev.32017-05-03

11 12 13

26 25 24 23 22 20 19

16 17

1155361-95 Rev.3 2017-05-03

18 19 20

23 24

26 27

29 30 31

32 33 34

35 36 37

38 39

4 1155361-95 Rev.3 2017-05-03

47 48

41 42

44 45 46

440e TrioBrake

60 61

57 58

6,8

445e TrioBrake

63 64 65 66

1155361-95 Rev.3 2017-05-03

68 70

76 78

81 82 83

84 85 86

72 73

6 1155361-95 Rev.3 2017-05-03

101

105

99 100

102 103

106 107

108 110 111

112

94 96 97

104

109

113 114

115 116 117

118

KEY TO SYMBOLS

English – 7

Symbols on the machine:

WARNING! Chain saws can be

dangerous! Careless or improper use

can result in serious or fatal injury to the

operator or others.

Please read the operator’s manual

carefully and make sure you understand

the instructions before using the

machine.

Always wear:

• Approved protective helmet

• Approved hearing protection

• Protective goggles or a visor

Both of the operator′s hands must be used

to operate the chain saw.

Never operate a chain saw holding it with

one hand only.

Contact of the guide bar tip with any object

must be avoided.

WARNING! Kickback may occur when the

nose or tip of the guide bar touches an

object, and cause a lightning fast reverse

reaction, kicking the guide bar up and

towards the operator. May cause serious

personal injury.

Ignition; choke: Set the choke control in

the choke position. This should

automatically set the stop switch to the

start position.

Air purge

Adjustment of the oil pump.

Refuelling.

Chain oil ﬁll.

Chain brake, activated (right) Chain

brake, not activated (left)

Other symbols/decals on the

machine refer to special certiﬁcation requirements

for certain markets.

1155361-95 Rev.3 2017-05-03

Switch off the engine before carrying

out any checks or maintenance.

CAUTION! The start/stop switch

automatically returns to run position. In

order to prevent unintentional starting,

the spark plug cap must be removed

from the spark plug when assembling,

checking and/or performing

maintenance.

Always wear approved protective

gloves.

Regular cleaning is required.

Visual check.

Protective goggles or a visor must be

worn.

Refuelling.

Filling with oil and adjusting oil ﬂow.

The chain brake must be engaged when

the chain saw is started.

WARNING! Kickback may occur when

the nose or tip of the guide bar touches an

object, and cause a lightning fast reverse

reaction, kicking the guide bar up and

towards the operator. May cause serious

personal injury.

The engine exhaust from this product

contains chemicals known to the State

of California to cause cancer, birth

defects or other reproductive harm.

KEY TO SYMBOLS

8 – English 1155361-95 Rev.3 2017-05-03

EPA III, CARB III (440e II TrioBrake)

EPA III (445e IITrioBrake)

The Emissions Compliance Period referred to on the

Emission Compliance label indicates the number of

operating hours for which the engine has been shown to

meet Federal emissions requirements.

Maintenance, replacement, or repair of the emission

control devices and system may be performed by any

nonroad engine repair establishment or individual.

CONTENTS

English – 9

1155361-95 Rev.3 2017-05-03

Contents

KEY TO SYMBOLS

Symbols on the machine: ..................................... 7

CONTENTS

Contents ............................................................... 9

INTRODUCTION

Dear customer! ..................................................... 10

WHAT IS WHAT?

What is what on the chain saw? ........................... 10

GENERAL SAFETY PRECAUTIONS

Before using a new chain saw .............................. 11

Important .............................................................. 11

Always use common sense .................................. 12

Personal protective equipment ............................. 12

Machine′s safety equipment ................................. 12

Cutting equipment ................................................ 14

ASSEMBLY

Fitting the bar and chain ....................................... 18

FUEL HANDLING

Fuel ...................................................................... 19

Fueling .................................................................. 20

Fuel safety ............................................................ 20

STARTING AND STOPPING

Starting and stopping ........................................... 21

WORKING TECHNIQUES

Before use: ........................................................... 22

General working instructions ................................ 22

How to avoid kickback .......................................... 25

MAINTENANCE

General ................................................................. 26

Carburetor adjustment .......................................... 26

Checking, maintaining and servicing chain saw

safety equipment .................................................. 26

Mufﬂer .................................................................. 27

Starter .................................................................. 27

Air ﬁlter ................................................................. 28

Spark plug ............................................................ 28

Needle bearing lubrication ................................... 28

Cooling system ..................................................... 28

”Air Injection” centrifugal cleaning ........................ 29

Winter use ............................................................ 29

Maintenance schedule ......................................... 30

TECHNICAL DATA

Technical data ...................................................... 31

Guide bar and saw chain combinations ............... 32

Saw chain ﬁling and ﬁle gauges ........................... 32

FEDERAL AND CALIFORNIA EMISSIONS

CONTROL WARRANTY STATEMENT

YOUR WARRANTY RIGHTS AND OBLIGATIONS 33

FEDERAL EMISSION CONTROL WARRANTY

STATEMENT

YOUR WARRANTY RIGHTS AND OBLIGATIONS 35

AMERICAN STANDARD SAFETY

PRECAUTIONS

Safety precautions for chain saw users ................ 37

INTRODUCTION

10 – English 1155361-95 Rev.3 2017-05-03

Dear customer!

Congratulations on your choice to buy a Husqvarna

product! Husqvarna is based on a tradition that dates

back to 1689, when the Swedish King Karl XI ordered the

construction of a factory on the banks of the Huskvarna

River, for production of muskets. The location was logical,

since water power was harnessed from the Huskvarna

River to create the water-powered plant. During over 300

years of continuous operation, the Husqvarna factory has

produced a lot of different products, from wood stoves to

modern kitchen appliances, sewing machines, bicycles,

motorcycles etc. In 1956, the ﬁrst motor driven lawn

mowers appeared, followed by chain saws in 1959, and it

is within this area Husqvarna is working today.

Today Husqvarna is one of the leading manufacturers in

the world of forest and garden products, with quality as

our highest priority. We develop, manufacture and market

high quality motor driven products for forestry and

gardening as well as for building and construction

industry.

Your purchase gives you access to professional help with

repairs and service whenever this may be necessary. If

the retailer who sells your machine is not one of our

authorized dealers, ask for the address of your nearest

servicing dealer.

It is our wish that you will be satisﬁed with your product

and that it will be your companion for a long time. Think of

this operator′s manual as a valuable document. By

following its′content (using, service, maintenance etc) the

life span and the second-hand value of the machine can

be extended. If you ever lend or sell this machine, make

sure that the borrower or buyer gets the operator′s

manual, so they will also know how to properly maintain

and use it.

Thank you for using a Husqvarna product.

Husqvarna AB has a policy of continuous product

development and therefore reserves the right to modify

the design and appearance of products without prior

notice.

For customer assistance, contact us at our website:

www.husqvarna.com

What is what on the chain saw? (1)

1 Cylinder cover

2 Air purge

3 Start reminder

4 Combined start and stop switch

5 Rear handle

6 Information and warning decal

7 Fuel tank

8 Adjuster screws carburetor

9 Starter handle

10 Starter

11 Chain oil tank

12 Product and serial number plate

13 Felling direction mark

14 Front handle

15 Front hand guard

16 Mufﬂer

17 Saw chain

18 Bar tip sprocket

19 Guide bar

20 Knob

21 Bumper spike

22 Chain catcher

23 Chain tensioner wheel

24 Clutch cover

25 Right hand guard

26 Throttle trigger

27 Throttle lockout

28 Right-hand brake trigger

29 Operator’s manual

30 Combination spanner

31 Guide bar cover

Otros manuales para 440e II

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Motosierra de Husqvarna

Husqvarna

Husqvarna 346XP TrioBrake Manual de usuario

Husqvarna

Husqvarna K6500 Manual de usuario

Husqvarna

Husqvarna ES020 Manual de usuario

Husqvarna

Husqvarna 136, 141 Manual de usuario

Husqvarna

Husqvarna 346XP TrioBrake Guía

Husqvarna

Husqvarna 440 e-series Manual de usuario

Husqvarna

Husqvarna 535FBX Manual de usuario

Husqvarna

Husqvarna 440e II Manual de usuario

Husqvarna

Husqvarna K960 Chain Manual de usuario

Husqvarna

Husqvarna K6500 II Chain Manual de usuario

Husqvarna

Husqvarna 346XP EPA II, 353 EPA Manual de usuario

Husqvarna

Husqvarna K 535i Manual de usuario

Husqvarna

Husqvarna 357XPG E-tech Manual de usuario

Husqvarna

Husqvarna 967 06 23-15 Manual de usuario

Husqvarna

Husqvarna 439 Manual de usuario

Husqvarna

Husqvarna T435 Manual de usuario

Husqvarna

Husqvarna 357XP/XPGl 357XP E-tech Manual de usuario

Husqvarna

Husqvarna 346XP EPA II, 353 EPA Manual de usuario

Husqvarna

Husqvarna 414 EL Manual de instrucciones

Husqvarna

Husqvarna T540XP Mark III Manual de usuario

Husqvarna

Husqvarna 1153137-95 Manual de usuario

Husqvarna

Husqvarna Chain Saw Guía de mantenimiento y servicio

Husqvarna

Husqvarna 450e II Manual de usuario

Husqvarna

Husqvarna T535i XP Manual de usuario

Manuales populares de Motosierra de otras marcas

Bushranger

Bushranger CS4210 Manual de usuario

Echo

Echo CS-330EVL Manual de usuario

HART

HART HLCS01 Manual de usuario

Homelite

Homelite UH10817 Manual de usuario

Westfalia

Westfalia SCS 725 Manual de usuario

Nakayama

Nakayama EC2050 Manual de usuario

The Handy

The Handy THPCS16 Manual de usuario

McCulloch

McCulloch PRO MAC 54 Manual

Craftsman

Craftsman 358.352162 Manual de usuario

Craftsman

Craftsman 358.350270 Manual de usuario

Craftsman

Craftsman 358.351610 Manual de usuario

Echo

Echo CS-8001(6digits)(36) Manual de instrucciones

Poulan Pro

Poulan Pro 545047544 Manual de usuario

Ryobi

Ryobi RY3714VNM Manual de usuario

Homelite

Homelite Ranger UT10926 Manual de usuario

McCulloch

McCulloch TimberBear TM502 Manual de usuario

SNOWJOE

SNOWJOE Sunjoe 20ViONLTE-CS10-RM Manual de usuario

Echo

Echo 37000001 Instrucciones de montaje