Husky 7901304012 Manual de usuario
THANK YOU
We appreciate the trust and con dence you have placed in Husky through the purchase of this LED PORTABLE
CORDED WORKLIGHT. We strive to continually create quality products designed to enhance your home. Visit us online
to see our full line of products available for your home improvement needs. Thank you for choosing Husky!
Item #1006 221 711
Model #
7901304012
USE AND CARE GUIDE
LED PORTABLE CORDED WORK LIGHT
Questions, problems, missing parts?
Before returning to the store, call
Husky Customer Service
8 a.m. – 7 p.m., EST, Monday-Friday
9 a.m. – 6 p.m., EST, Saturday
1-888-HD-HUSKY
HUSKYTOOLS.COM
2
Table of Contents
Safety Information................................2
Warranty ...............................................2
Pre-Installation.....................................3
Planning Installation................................... 3
Hardware Required.................................... 3
Package Contents ...................................... 4
Installation ........................................... 5
Care and Maintenance........................ 9
Troubleshooting .................................. 9
Safety Information
Please read and understand this entiremanual before
attempting to assemble, operate or install theproduct.
WARNING
:
CAUTION:
NOTICE: This equipment hasbeen tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. Theselimits are designed toprovidereasonable
protection against harmful interference in aresidential installation.
This equipment generates, uses and can radiate radiofrequency
energyand, if not installed and used in accordance with the
instructions, may cause harmful interferenceto radio
communications. However, there is noguarantee that interference
will notoccur in a particular installation. If thisequipment does
causeharmful interferencetoradio or television reception, which
can bedetermined by turning the equipment off and on, the user is
encouraged to try to correct the interferenceby one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipmentinto an outlet on a circuit different from
that to which the receiver in connected.
Consult the dealer or an experienced radio/TV technician for help.
Warranty
3-YEAR LIMITED WARRANTY
If within three yearsfrom date of purchase, this Husky product failsdueto adefect in materials or workmanship,
return theproduct toany Home Depot retail store with a receipt indicating proof of purchase for replacement with
an item of equal or greater value. This warranty excludesincidental/inconsequential damages and failures due to
which vary from state to state. Please see store or call 1-888-HD-HUSKY.
not certain about the installation process. Always install
wiring connectionsin accordance with local code,
ordinances and theNational Electric Code.
When using outdoor-use portable
luminaires, basic safety precautions should always be
personal injury, including the following:
a) Use only three-wire outdoor extension cords that
have three-prong grounding plugs and grounding
receptacles that accept the appliance’s plug.
b) Ground Fault CircuitInterrupter (GFCI) protection is to
be provided on thecircuit(s) or outlet(s) tobeused for
the wet location portableluminaire. Receptacles are
availablehaving built-in GFCI protection and are able to
be used for thismeasure of safety.
c) Use only with an extension cord for outdoor use, such
as an extension cord of cord type SEW, SEOW, SEOOW,
SOW, SOOW, STW, STOW, STOOW, SJEW, SJEOW,
SJEOOW, SJW, SJOW, SJOOW, SJTW, SJTOW, or
SJTOOW.
PROPER MOUNTING ENVIRONMENT:
SUITABLE FOR WET LOCATION
CAUTION:
RISK OFELECTRICSHOCK, Donotuse with
extension cord near water or where water may
accumulate. Keep lamp atleast 16 feet from pools and
spas. Keep plugs and receptacles dry. For use only on
GFCI protected circuits.
WARNING:
not expressly approved by the party responsible for
compliancecould void theuser's authority to operate
the equipment.
3 HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
Pre-Installation
PLANNING INSTALLATION
Included and Package Contents lists. If any part is missing or damaged, donot attempt to assembletheproduct.
HARDWARE REQUIRED
NOTE: Hardware not shown to actual size.
Part
Description
Quantity
AA
Wrench
1
4
Pre-Installation (continued)
PACKAGE CONTENTS
Part
Description
Quantity
A
Work light head
1
B
Work light body
1
—
B
—
A
—
BB
BB
Spring buckle
2
5 HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
Installation
1
Assemble the worklight
2
Release the tripod extension
lock
Press and hold the spring buckle (BB) on the
bracket and assemble the work light head (A)
to the work light body (B) in the direction
indicated by the arrow.
To deploy, release the tripod extension lock and
lift the light head upward until all three legs
release.
3
Open the tripod
4
Put the light on the ground
Shake the bracket to open the tripod.
Once all three legs are released, push the light
downward until all three legs make contact with
the ground.
same direction
A
B
BB
6
Installation (continued)
5
Lock the extension lock
Once all three legs have made contact with the ground,
lock it. To return the legs to the folded position for storage,
release the extension lock and pull it back to the original
position.
NOTE
6
Raise the light head
Release the top extension lock and raise the light
head to the desired height, then lock the top
extension lock.
: Ensure the worklight is notplaced on a surface with
greater than 8°slope.
＞8°
7 HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
Installation (continued)
7
AA
Adjust the lighthead
Unfold the light head and adjust to the desired angle.
NOTE
: If the lightheads are either tooloose or tight after
adjustment, tighten the screwin the shaft as pictured with
the wrench (AA) provided.
90°
90°
±165°
±165°
Store the wrench
After using, store the wrench (AA) in the storage
slot next to the light heads.
8
AA
9
8
Installation (continued)
Plug thepower cord into the outlet
Place the power cord in the tripod slot as pictured
and plug into the outlet.
10 Turn on the light
Press the rocker switch.
OFF ON
9 HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
Care and Maintenance
Your portable LED work light requires very little careand maintenance. Simplyclean the lens, lamp head and lamp
stand regularly with a non-abrasive cleaner.
Troubleshooting
Problem
Possible Cause
Solution
The light will not illuminate.
The power is off.
Make sure the power supply is on.
The switch is off.
Make sure the switch is on.
There is poor connection
between the cable and
outlet.
Make sure the connection is OK.
to lock.
The screw beside the
extension lock is loose.
screwdriver (not included).
WARNING: Alwaysmake sure the work lightis
unplugged and completely cool before attempting to
clean it.
CAUTION: Turn OFF all power to the circuit at the
main circuit breaker or fuse box. DO NOT rely on the
wall switch alone toturn off power.
Questions, problems, missing parts? Before returning to the store,
call Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday,9a.m. – 6 p.m., EST, Saturday
1-888-HD-HUSKY
HUSKYTOOLS.COM
Retain this manual for future use.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Idiomas:
Otros manuales de Luz de trabajo de Husky
