HunterLab D25 NC Manual de usuario

D25®NC Quick Start Guide

A60-1016-531 ver 1.1

SETTING UP THE INSTRUMENT STANDARDIZATION

1. In MAIN MENU, press the RIGHT

ARROW to select STANDARDIZE.

Current values of the white and

green tiles are displayed, matching

the calibration box. Press NEXT

(right arrow) to continue.

2. Slide the calibration box onto the

track under the sensor. Line up the

black glass and press GO.

3. Slide the white tile into view —> GO.

4. Place green check tile into view —>

GO.

5. The result of the green check tile is

displayed. If PASS, press the RIGHT

ARROW to return to the MAIN MENU.

Now your instrument is ready

for standardization. Now your instrument is ready

to read samples.

SET DISTANCE FROM

SENSOR TO PRODUCT

For more detailed instructions on using the instrument, please refer to the D25®NC User’s Manual.

Visit www.hunterlab.com for information on all our products.

1. Place sample in the dish and press

MEASURE.

2. (Option) Press the DOWN arrow to

PRINT the reading to a USB printer.

1. Select a sample dish to use with the

turntable and place the product in

the dish on the turntable.

3. Raise and lower sensor height until

distance sensor reads close to 90 mm.

2. From the MAIN MENU go to SYSTEM

SETTINGS > DIAGNOSTICS —> GO —>

DISTANCE SENSOR >.

ABC

READING SAMPLES

1. Unpack the D25 NC sensor and

place the unit on the bench.

Save the shipping box in case

of service.

2. Connect the power cord to the

back of the turntable and

an electrical outlet.

(Option) Connect the USB cable

from the instrument to a printer.

3. Turn the power on using the switch

on the back of the turntable.

The MAIN MENU will display.

A60-1016-531 ver 1.1

Electrical

outlet

Otros manuales para D25 NC

Otros manuales de Equipo de laboratorio de HunterLab

HunterLab

HunterLab D25-PC2A Manual de usuario

HunterLab

HunterLab Aeros EasyMatch QC Manual del propietario

HunterLab

HunterLab Agera Manual de usuario

HunterLab

HunterLab MiniScan EZ Manual de usuario

HunterLab

HunterLab ColorFlex EZ Coffee Manual de usuario

HunterLab

HunterLab EasyMatch QC Manual del propietario

HunterLab

HunterLab ColorFlex EZ Coffee Manual de usuario

HunterLab

HunterLab EasyMatch QC Manual de usuario

Manuales populares de Equipo de laboratorio de otras marcas

Qiagen

Qiagen DML 3000 Manual de usuario

Queensgate

Queensgate NANOSCAN OP400 Manual de programación

Conviron

Conviron GEN1000-GE Manual de usuario

Parr Instrument

Parr Instrument 4560 Manual de instrucciones

IKA

IKA IC control Manual de usuario

Integra

Integra DOSE IT Manual de usuario

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manual de usuario

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manual de usuario

NI PXI-5422 Manual

Collomix

Collomix Aqix Manual de usuario

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manual de usuario

Ocean Insight

Ocean Insight FLAME-NIR+ Manual de usuario

Parker

Parker ALIGN-MG-NA Manual de usuario

BD 644787 Manual de usuario

DENTAURUM

DENTAURUM Compact Megaplus Manual de usuario

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manual de usuario

VWR

VWR SAS Super IAQ Manual de usuario

illumina

illumina MiSeqDx Manual de usuario