Huawei BAH2-W19 Manual de usuario
Quick Start Guide
Guide de démarrage rapide
BAH2-W19
Your Device at a Glance
Before you start, let's take a look at your new device.
lTo power on your device, press and hold the power button until the
screen turns on.
lTo power off your device, press and hold the power button, and then
touch .
lTo restart your device, press and hold the power button, and then
touch .
lPress and hold the power button for 10 or more seconds to forcibly
restart your device.
2 2
6
7
8
9
1
2
3
4
5
2
10
11
12
13
Front camera Speaker
Proximity sensor Ambient light sensor
Fingerprint scanner Headset jack
USB-C port Card tray
Rear camera Power button
Volume button Status indicator
Microphone
English
1
Getting Started
lEnsure that the card is correctly aligned and that the card tray is
level when you insert it into your device.
lBe careful not to scratch your device or hurt yourself when using
the eject pin.
lStore the eject pin out of the reach of children to prevent
accidental swallowing or injury.
Follow the instructions in the following gures to set up your device.
Please use the eject pin included.
BAH2-W19:
1 2
2
For More Information
If you encounter any problems while using your device, you can obtain
help from the following resources:
lVisit http://consumer.huawei.com/en to view device information,
frequently asked questions and other information.
lVisit http://consumer.huawei.com/en/support for the most up-to-date
contact information for your country or region.
Go to Settings and touch System > About tablet > Legal to view legal
information for your product.
Go to Settings and touch System > About tablet > Legal > Safety
information to view safety information for your product.
Go to Settings and touch System > About tablet > Regulatory
information to view regulatory information for your product.
Go to Settings and touch System > Certication logos to view more
information on certication logos for your product.
All pictures and illustrations in this guide, including but not limited
to the device color, size, and display content, are for your reference
only. The actual device may vary. Nothing in this guide constitutes a
warranty of any kind, express or implied.
3
Safety Information
Please read all of the safety information carefully before using your device
to ensure its safe and proper operation and to learn how to dispose of
your device properly.
Operation and safety
l To prevent possible hearing damage, do not listen at high
volume levels for long periods.
lUsing an unapproved or incompatible power adapter, charger, or
battery may damage your device, shorten its lifespan, or cause a re,
explosion, or other hazards.
lIdeal operating temperatures are 0 °C to 35 °C. Ideal storage
temperatures are -20 °C to +45 °C.
lPacemaker manufacturers recommend that a minimum distance of 15
cm be maintained between a device and a pacemaker to prevent
potential interference with the pacemaker. If using a pacemaker, hold
the device on the side opposite the pacemaker and do not carry the
device in your front pocket.
lKeep the device and the battery away from excessive heat and direct
sunlight. Do not place them on or in heating devices, such as
microwave ovens, stoves, or radiators.
lObserve local laws and regulations while using the device. To reduce
the risk of accidents, do not use your wireless device while driving.
lWhile ying in an aircraft or immediately before boarding, only use
your device according to instructions provided. Use of a wireless
device in an aircraft may disrupt wireless networks, present a hazard to
aircraft operation, or be illegal.
lTo prevent damage to your device's parts or internal circuits, do not
use it in dusty, smoky, damp, or dirty environments or near magnetic
elds.
lWhen charging the device, make sure the power adapter is plugged
into a socket near the devices and is easily accessible.
4
lUnplug the charger from electrical outlets and the device when not in
use.
lDo not use, store or transport the device where ammables or
explosives are stored (in a gas station, oil depot, or chemical plant, for
example). Using your device in these environments increases the risk of
explosion or re.
lDispose of this device, the battery, and accessories according to local
regulations. They should not be disposed of in normal household
waste. Improper battery use may lead to re, explosion, or other
hazards.
FCC Regulatory Compliance
Certication information (SAR)
This device is also designed to meet the requirements for exposure to
radio waves established by the Federal Communications Commission
(USA).
The SAR limit adopted by the USA is 1.6 W/kg averaged over one gram of
tissue. The highest SAR value reported to the FCC for this device type
complies with this limit.
The highest SAR value reported to the FCC for this device type when
using it in portable exposure conditions is
BAH2-W19 0.55 W/kg
FCC statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
5
--Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution: Any changes or modications to this device not expressly
approved by Huawei Technologies Co., Ltd. for compliance could void the
user's authority to operate the equipment.
Industry Canada compliance
The highest SAR value reported to the IC for this device type when using
it in portable exposure conditions is
BAH2-W19 0.63 W/kg
IC Statement
This device complies with CAN ICES-3 (B)/NMB-3(B).
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation
of the device.
Restrictions in the 5 GHz band:
Within the 5.15 to 5.25 GHz band, UNII devices will be restricted to
indoor operations to reduce any potential for harmful interference to co-
channel Mobile Satellite System (MSS) operations.
6
Legal Notice
Trademarks and Permissions
, , and are trademarks or registered
trademarks of Huawei Technologies Co., Ltd.
Android™ is a trademark of Google Inc.
The Bluetooth® word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc. and any use of such marks by Huawei Technologies
Co., Ltd. is under license.
Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of
Wi-Fi Alliance.
ENERGY STAR® MARK
For information related to ENERGY STAR®, please visit the website
www.energystar.gov.
Privacy Policy
To better understand how we protect your personal information, please
see the privacy policy at http://consumer.huawei.com/privacy-policy.
Copyright © Huawei Technologies Co., Ltd. 2018. All
rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT
CONSTITUTE ANY KIND OF WARRANTIES.
7
Passage en revue de votre appareil
Avant de commencer, passons en revue votre nouvel appareil.
lPour allumer votre appareil, appuyez sans relâcher sur le bouton
d'alimentation jusqu'à ce que l'écran s'allume.
lPour éteindre votre appareil, appuyez sans relâcher sur le bouton
d'alimentation, puis appuyer sur .
lPour redémarrer votre appareil, maintenez le bouton d'alimentation
enfoncé, puis appuyez sur .
lMaintenez le bouton Marche enfoncé pendant 10 secondes ou plus
pour redémarrer votre appareil.
2 2
6
7
8
9
1
2
3
4
5
2
10
11
12
13
Caméra avant Haut-parleur
Capteur de proximité
Capteur de lumière
ambiante
Lecteur d'empreintes
digitales Prise pour casque d'écoute
Port USB de type C Plateau de carte
Caméra arrière Bouton Marche
Français
8
Tabla de contenidos
Idiomas:
Otros manuales de Tableta de Huawei
Huawei
Huawei MediaPad T1 7.0 Manual de usuario
Huawei
Huawei MediaPad T1-821L Manual de usuario
Huawei
Huawei MediaPad T3 Manual de usuario
Huawei
Huawei T1-A21W Manual de usuario
Huawei
Huawei MatePad Pro 5G Manual de usuario
Huawei
Huawei MediaPad 7 Vogue Manual de usuario
Huawei
Huawei MediaPad X1 7.0 Manual de usuario
Huawei
Huawei 53010PTK Manual de usuario
Huawei
Huawei : BTK-W09 Manual de usuario
Huawei
Huawei S7-722U Manual de usuario
Huawei
Huawei IDEOS S7 Slim Manual de usuario
Huawei
Huawei MediaPad M3 Manual de usuario
Huawei
Huawei MatePad Manual de usuario
Huawei
Huawei KOB2-L09 Manual de usuario
Huawei
Huawei P8 lite Manual de usuario
Huawei
Huawei MatePad T 10s Manual de usuario
Huawei
Huawei MediaPad T1 7.0 Dimensiones
Huawei
Huawei MatePad 11 Manual de usuario
Huawei
Huawei MediaPad 10 Link Manual de usuario
Huawei
Huawei KOB-W09 Manual de usuario
