Huawei FusionDC1000A Manual de usuario

FusionDC1000A Prefabricated All-in-One Data

Center

V100R021C00

Commissioning Guide (IT Scenario)

Issue 02

Date 2022-12-15

HUAWEI DIGITAL POWER TECHNOLOGIES CO., LTD.

No part of this document may be reproduced or transmitted in any form or by any means without prior

written consent of Huawei Digital Power Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are the property of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective

holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei

Digital Power Technologies Co., Ltd. and the customer. All or part of the products, services and features

described in this document may not be within the purchase scope or the usage scope. Unless otherwise

specied in the contract, all statements, information, and recommendations in this document are

provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every eort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Digital Power Technologies Co., Ltd.

Address: Huawei Digital Power Antuoshan Headquarters

Futian,Shenzhen 518043

People's Republic of China

Website: https://e.huawei.com

About This Document

Purpose

This document describes how to power on and commission the FusionDC1000A

prefabricated all-in-one data center solution (FusionDC1000 for short) in terms of

safety precautions, preparations, power-on check, power-on commissioning, joint

commissioning, power-o, and core device commissioning. It provides you a quick

grasp of how to commission the prefabricated all-in-one data center.

Intended Audience

This document is intended for:

● Hardware installation engineers

● Technical support engineers

● Commissioning engineers

● Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are dened as follows.

Symbol Description

Indicates a hazard with a high level of risk which,

if not avoided, will result in death or serious

injury.

Indicates a hazard with a medium level of risk

which, if not avoided, could result in death or

serious injury.

Indicates a hazard with a low level of risk which,

if not avoided, could result in minor or moderate

injury.

FusionDC1000A Prefabricated All-in-One Data

Center

Commissioning Guide (IT Scenario) About This Document

Symbol Description

Indicates a potentially hazardous situation which,

if not avoided, could result in equipment damage,

data loss, performance deterioration, or

unanticipated results.

NOTICE is used to address practices not related to

personal injury.

Supplements the important information in the

main text.

NOTE is used to address information not related

to personal injury, equipment damage, and

environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue

contains all the changes made in earlier issues.

Issue 02 (2022-12-15)

This issue is the second ocial release.

● Optimized the content description.

● Updated 1 Safety Information.

Issue 01 (2021-04-20)

This issue is the rst ocial release.

FusionDC1000A Prefabricated All-in-One Data

Center

Commissioning Guide (IT Scenario) About This Document

Contents

About This Document................................................................................................................ ii

1 Safety Information.................................................................................................................. 1

1.1 Personal Safety.........................................................................................................................................................................2

1.2 Electrical Safety........................................................................................................................................................................4

1.3 Environmental Requirements.............................................................................................................................................. 8

1.4 Mechanical Safety.................................................................................................................................................................10

1.5 Equipment Safety..................................................................................................................................................................15

1.5.1 UPS Safety............................................................................................................................................................................16

1.5.2 Cooling System Safety..................................................................................................................................................... 17

1.5.3 Battery Safety..................................................................................................................................................................... 17

2 Commissioning Guide Usage.............................................................................................. 25

3 Preparations for Power-On Commissioning....................................................................26

3.1 Tools.......................................................................................................................................................................................... 26

3.2 Reference Documentation................................................................................................................................................. 28

3.3 Commissioning Personnel Skill Requirements............................................................................................................ 28

3.4 Check Before Power-On......................................................................................................................................................29

4 Commissioning Core Devices.............................................................................................. 34

4.1 Commissioning the Integrated UPS................................................................................................................................34

4.1.1 (Optional) Commissioning the ATS............................................................................................................................ 34

4.1.2 Powering On and Starting the UPS.............................................................................................................................35

4.1.2.1 Power-On.......................................................................................................................................................................... 35

4.1.2.2 Starting the Inverter......................................................................................................................................................36

4.1.2.3 Powering On Loads....................................................................................................................................................... 36

4.2 Commissioning the SmartLi.............................................................................................................................................. 37

4.2.1 Connecting the Battery Supply..................................................................................................................................... 37

4.2.2 Powering O Batteries.................................................................................................................................................... 41

4.2.3 Performing EPO..................................................................................................................................................................42

4.2.4 Clearing the EPO State.................................................................................................................................................... 42

4.3 Commissioning Smart Cooling Products.......................................................................................................................43

4.4 Commissioning Monitoring Devices............................................................................................................................... 44

4.4.1 Commissioning the Access Control System.............................................................................................................. 44

4.5 Commissioning Fire Extinguishing Devices (Standard)........................................................................................... 45

FusionDC1000A Prefabricated All-in-One Data

Center

Commissioning Guide (IT Scenario) Contents

4.5.1 Commissioning the Fire Alarm Control Panel (Standard)...................................................................................45

4.5.2 Commissioning the Emergency Light (Standard).................................................................................................. 46

4.6 Commissioning Fire Extinguishing Devices (CE)........................................................................................................ 47

4.6.1 Commissioning the Emergency Light (CE)............................................................................................................... 48

4.6.2 (Optional) Commissioning the ASD........................................................................................................................... 49

4.7 (Optional) NetEco Management.................................................................................................................................... 50

4.7.1 Preparations and WebUI Login.....................................................................................................................................50

4.7.2 Performing Basic Operations Before Adding Devices........................................................................................... 54

4.7.2.1 IP Address Preinstallation Planning......................................................................................................................... 55

4.7.2.2 Obtaining the NetEco Software License................................................................................................................ 55

4.7.2.3 Logging In to the NetEco Client............................................................................................................................... 55

4.7.2.4 Loading the NetEco Software License.................................................................................................................... 56

4.7.2.5 Installing NE Adapters..................................................................................................................................................56

4.7.2.6 Creating a Management Domain.............................................................................................................................57

4.7.2.7 How Can I Set and Add a SmartLi (Modbus-TCP)?............................................................................................58

4.7.2.8 Process of adding a device..........................................................................................................................................59

4.7.3 Setting and Adding the ECC800 Collector................................................................................................................ 60

4.7.3.1 Setting Management System Parameters............................................................................................................. 61

4.7.3.2 Setting the Transparent Transmission Function for the ECC800-Pro Collector.........................................62

5 System Commissioning........................................................................................................ 65

5.1 Switching Between Two Power Supplies...................................................................................................................... 65

5.2 Fire Extinguishing System Commissioning (3C).........................................................................................................66

5.3 Fire Extinguishing System Commissioning (CE).........................................................................................................72

5.4 System Power-O.................................................................................................................................................................78

A Acronyms and Abbreviations............................................................................................. 79

FusionDC1000A Prefabricated All-in-One Data

Center

Commissioning Guide (IT Scenario) Contents

1 Safety Information

Statement

Before transporting, storing, installing, operating, using, or maintaining the

equipment, read this document, strictly follow the instructions provided herein,

and follow all the safety instructions on the equipment and in this document. In

this document, "equipment" refers to the products, software, components, spare

parts, and/or services related to this document; "the Company" refers to the

manufacturer (producer), seller, and/or service provider of the equipment; "you"

refers to the entity that transports, stores, installs, operates, uses, and/or

maintains the equipment.

The Danger, Warning, Caution, and Notice statements described in this

document do not cover all the safety precautions. You also need to comply with

relevant international, national, or regional standards and industry practices. The

Company shall not be liable for any consequences that may arise due to

violations of safety requirements or safety standards concerning the design,

production, and usage of the equipment.

The equipment should be used in an environment that meets the design

specications. Otherwise, the equipment may be faulty, malfunctioning, or

damaged, which is not covered under the warranty. The Company shall not be

liable for any property loss, personal injury, or even death caused thereby.

Comply with applicable laws, regulations, standards, and specications during

transportation, storage, installation, operation, use, and maintenance.

Do not perform reverse engineering, decompilation, disassembly, adaptation,

implantation, or other derivative operations on the equipment software. Do not

study the internal implementation logic of the equipment, obtain the source code

of the equipment software, violate intellectual property rights, or disclose any of

the performance test results of the equipment software.

The Company shall not be liable for any of the following circumstances or

their consequences:

● Equipment damage due to force majeure such as earthquakes, oods,

volcanic eruptions, debris ows, lightning strikes, res, wars, armed conicts,

typhoons, hurricanes, tornadoes, and extreme weather conditions

● Operation beyond the conditions specied in this document

FusionDC1000A Prefabricated All-in-One Data

Center

Commissioning Guide (IT Scenario) 1 Safety Information

● Installation or use in environments that do not comply with international,

national, or regional standards

● Failure to follow the operation instructions and safety precautions on the

product and in the document

● Unauthorized modications to the product or software code or removal of the

product

● Damage caused during transportation by you or a third party authorized by

you

● Storage conditions that do not meet the requirements specied in the product

document

● Failure to comply with local laws, regulations, or related standards due to the

materials and tools prepared by you

● Damage caused by your or a third party's negligence, intentional breach,

gross negligence, or improper operations or damage not caused by the

Company

1.1 Personal Safety

D ANGER

Do not work with power on during installation. Do not install or remove a cable

with power on. Transient contact between the core of the cable and the conductor

will generate electric arcs or sparks, which may cause a re or personal injury.

D ANGER

Non-standard and improper operations on the energized equipment may cause

re or electric shocks, resulting in property damage, personal injury, or even death.

D ANGER

Before operations, remove conductive objects such as watches, bracelets, bangles,

rings, and necklaces to prevent electric shocks.

D ANGER

During operations, use dedicated insulated tools to prevent electric shocks or short

circuits. The insulation and voltage resistance must comply with local laws,

regulations, standards, and specications.

FusionDC1000A Prefabricated All-in-One Data

Center

Commissioning Guide (IT Scenario) 1 Safety Information

WARNING

During operations, wear personal protective equipment such as protective

clothing, insulated shoes, goggles, safety helmets, and insulated gloves.

Figure 1-1 Personal protective equipment

General Requirements

● Do not stop protective devices. Pay attention to the warnings, cautions, and

related precautionary measures in this document and on the equipment.

● If there is a likelihood of personal injury or equipment damage during

operations, immediately stop, report the case to the supervisor, and take

feasible protective measures.

● Do not power on the equipment before it is installed or conrmed by

professionals.

● Do not touch the power supply equipment directly or with conductors such as

damp objects. Before touching any conductor surface or terminal, measure

the voltage at the contact point to ensure that there is no risk of electric

shock.

● Do not touch a running fan with your hands, components, screws, tools, or

boards. Otherwise, personal injury or equipment damage may occur.

● In the case of a re, immediately leave the building or the equipment area

and activate the re alarm or call emergency services. Do not enter the

aected building or equipment area under any circumstances.

Personnel Requirements

● Only professionals and trained personnel are allowed to operate the

equipment.

– Professionals: personnel who are familiar with the working principles and

structure of the equipment, trained or experienced in equipment

operations and are clear of the sources and degree of various potential

hazards in equipment installation, operation, maintenance

– Trained personnel: personnel who are trained in technology and safety,

have required experience, are aware of possible hazards on themselves in

FusionDC1000A Prefabricated All-in-One Data

Center

Commissioning Guide (IT Scenario) 1 Safety Information

certain operations, and are able to take protective measures to minimize

the hazards on themselves and other people

● Personnel who plan to install or maintain the equipment must receive

adequate training, be able to correctly perform all operations, and understand

all necessary safety precautions and local relevant standards.

● Only qualied professionals or trained personnel are allowed to install,

operate, and maintain the equipment.

● Only qualied professionals are allowed to remove safety facilities and inspect

the equipment.

● Personnel who will perform special tasks such as electrical operations,

working at heights, and operations of special equipment should possess the

required local qualications.

● Only authorized professionals are allowed to replace the equipment or

components (including software).

● Only personnel who need to work on the equipment are allowed to access

the equipment.

1.2 Electrical Safety

D ANGER

Before connecting cables, ensure that the equipment is intact. Otherwise, electric

shocks or res may occur.

D ANGER

Non-standard and improper operations may result in re or electric shocks.

D ANGER

Prevent foreign matter from entering the equipment during operations. Otherwise,

equipment damage, load power derating, power failure, or personal injury may

occur.

WARNING

For the equipment that needs to be grounded, install the ground cable rst when

installing the equipment and remove the ground cable last when removing the

equipment.

FusionDC1000A Prefabricated All-in-One Data

Center

Commissioning Guide (IT Scenario) 1 Safety Information

Otros manuales para FusionDC1000A

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Almacenamiento de Huawei

Huawei

Huawei FusionModule2000 V500R002C03 Manual de funcionamiento

Huawei

Huawei E600 Manual de usuario

Huawei

Huawei FusionModule1000A Manual de usuario

Huawei

Huawei IDS1000-A Manual de funcionamiento

Huawei

Huawei FusionModule5000 Manual de funcionamiento

Huawei

Huawei FusionModule800 Manual de usuario

Huawei

Huawei FusionModule2000 V500R003C10 Manual de funcionamiento

Huawei

Huawei FusionModule2000 V500R003C10 Manual de usuario

Huawei

Huawei EC821 Manual de usuario

Huawei

Huawei E1820 Instrucciones de montaje

Huawei

Huawei FusionModule1000A20 Manual de usuario

Huawei

Huawei E180 Manual de usuario

Huawei

Huawei OceanStor Dorado2100 G2 Manual de usuario

Huawei

Huawei OceanStor Dorado5100 Manual de usuario

Huawei

Huawei EG602 Manual de usuario

Huawei

Huawei E182E HSPA+ Manual de usuario

Huawei

Huawei OceanStor Dorado V3 Series Manual de usuario

Huawei

Huawei E880 Manual de usuario

Huawei

Huawei FusionDC1000B Manual de usuario

Huawei

Huawei FusionModule500 Manual de usuario

Huawei

Huawei FusionModule5000 Manual de usuario

Huawei

Huawei Quidway S5000 Series Instrucciones de uso

Huawei

Huawei FusionModule1000A40 ICT Solution Manual de funcionamiento

Huawei

Huawei ES3000 V5 Manual de usuario

Manuales populares de Almacenamiento de otras marcas

QNAP

QNAP TS 32PXU Series Manual de usuario

LaCie

LaCie RUGGED RAID Manual de usuario

Freecom

Freecom CLS DOCK Manual de usuario

PNY

PNY Attache P-FD64MBATT3 Manual de usuario

HP StorageWorks MSL2024 Manual de usuario

OLT

OLT 6x6 Maximizer Manual de usuario

Transcend

Transcend JetFlash 160 Manual de usuario

LaCie

LaCie RUGGED MINI Manual de usuario

Thunderbolt

Thunderbolt 600 Manual de usuario

Panasonic

Panasonic LB-DH8 series Manual

Intel

Intel RAID High Availability Manual de usuario

LaCie

LaCie 12big Thunderbolt 3 Manual de usuario

Spectra Logic

Spectra Logic T-Series Spectra T50e Manual de usuario

Panasonic

Panasonic LKM-F931-1 Manual de usuario

Tabernus

Tabernus Enterprise Erase E2400 Manual de usuario

Rocstor

Rocstor COMMANDER 3F series Manual de usuario

HP P9000 Manual de usuario

Western Digital

Western Digital Ultrastar Data60 Manual de usuario