Huawei C2601 Manual de usuario
C2601
CDMA 1X Mobile Phone
Copyright © 2007 Huawei Technologies Co., Ltd.
and other Huawei trademarks are the trademarks or registered trademarks of Huawei Technologies Co., Ltd.
in the People’s Republic of China and certain other countries. All other trademarks mentioned in this manual are the
property of their respective holders. The information in this manual is subject to change without notice. Every effort
has been made in the preparation of this manual to ensure accuracy of the contents, but all statements, information,
and recommendations in this manual do not constitute the warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base, Bantian, Longgang, Shenzhen 518129, People's Republic of China
Tel: +86-755-28780808 Global Hotline: +86-755-28560808
E-mail: mobile@huawei.com Website: www.huawei.com
1
Your Phone
Screen
Dial/Send Key
Number Keys
Navigation Keys
Left Soft Key Right Soft Ke
y
Earpiece
Ke
y
Charger Interface
Key
End/Power Key
Microphone
2
Keys and Functions
Press… To…
zView the dialled calls in the standby mode.
zMake or answer a call.
zPower on or off the phone (by pressing and holding
it).
zEnd a call or reject an incoming call.
zReturn to the home screen.
Select the option displayed on the lower left corner of
the screen.
Select the option displayed on the lower right corner of
the screen.
zDisplay the Profiles interface ( ), the Messages
interface ( ), the Scheduler interface ( ), and
the Alarm interface ( ) in the standby mode.
zIncrease the volume ( or ) or decrease the
volume ( or ) during a call.
–
zEnter numbers and characters.
zSpeed-dial phone numbers in the standby mode (by
pressing and holding the 1-9 keys).
zSelect a submenu item labeled the corresponding
number.
3
Press… To…
zEnter the * symbol.
zEnable or disable the Meeting profile (by pressing
and holding it).
zProvide different functions according to the phone
features being used.
zEnter the # symbol.
zLock the keypad in the standby mode (by pressing
and holding it).
zProvide different functions according to the phone
features being used.
Screen Icons
Icon Description Icon Description
Network signal strength Battery power level
Calling… General profile
Voice privacy Meeting profile
Roaming… Silent profile
CDMA 1X network Outdoor profile
Message received Keypad locked
Emergency message
received Alarm clock on
Memory for messages full Voice mail
4
Menu Tree
Messages Tools
1 Recorder
2 Alarm
3 Scheduler
4 Calculator
5 Gallery
Profiles
1 Write Message
2 Inbox
3 Outbox
4 Draft
5 Voice Mail
6 Templates
7 Message Settings
8 Delete All
Contacts
1 General
2 Meeting
3 Silent
4 Outdoor
Settings
1 Display
2 Call Settings
3 Phone Settings
4 Security
1 Search
2 Add New
3 Groups
4 Speed Dial
5 Copy All (*)
6 Delete All
7 My Phone No.
8 Memory Status
Call Log
1 Missed Calls
2 Received Calls
3 Dialled Calls
4 Call Duration
5 Delete All
Copy All (*)
If the UIM card is available, the Copy
All submenu item is displayed under
the Contacts item.
5
Installing the UIM Card and Battery
Consult the network operator whether a UIM card is needed.
Make sure that the golden area on the UIM card is facing downwards
and the cut-off edge is correctly aligned with the card holder.
Removing the Battery and UIM Card
Make sure that your phone is powered off.
Charging the Battery
1. Connect the charger to the charger interface at the bottom of your
phone.
Make sure that the arrow on the charger connector faces the front
of the phone.
2. Connect the charger to an AC power socket.
3. During the charging, the charging icon is displaying in animation.
4. When the charging icon becomes static, the battery is fully
charged. Disconnect the charger from the AC power socket.
5. Disconnect the charger from the phone.
6
Using the Function Menu
1. In the standby mode, press (Menu) to display the Menu
interface.
2. Press to scroll to a menu item.
3. Press (Select) to display the menu.
4. Display the submenu in either of the ways:
zPress to scroll to a submenu item and press (Select)
to display the submenu.
zPress the number key corresponding to the number of a submenu
to display it.
5. Press (Back) to return to the previous menu or quit the
function menu.
Press to return to the home screen.
Making a Call
1. In the standby mode, enter a phone number.
zTo make an international call, press four times to enter the
international long distance code of "+". Then enter the number to
be dialled, in the format of "country code + region code + phone
number".
zTo call a number with an extension, press twice to insert
"P", or press three times to insert "T" between the phone
number and the extension.
2. Press to dial the number.
3. Press to end the call.
7
Note zWhen the phone is locked, enter the lock code to unlock
the phone first; otherwise, you can make emergency calls
or answer calls only.
zIn the standby mode, press to view the dialled calls.
Select a record and press to dial.
zSelect a contact from the contacts and press to dial.
zSelect a message in the inbox and press to dial.
Answering a Call
When there is an incoming call, you can press , (Answer)
to answer it, or press (Silence) to mute the tone, or press
to reject the call. If the Any-key Answer function is enabled, you can
press any key except and to answer an incoming call.
Phone Lock
The phone lock function protects your phone from unauthorized use.
The default phone lock code is 000000. You can change it into any
numeric string of 4 to 8 digits.
If the phone lock function is enabled, you need to enter the correct
phone lock code when the phone is powered on or in standby mode.
PIN and PUK
The personal identity number (PIN) protects your UIM card from
unauthorized use. The PIN unlocking key (PUK) can unblock the
blocked PIN. Both PIN and PUK are delivered with the UIM card.
For details, consult your service provider.
If you enter wrong PINs for a specified number of times
consecutively, the phone asks you to enter the PUK code.
If you enter wrong PUKs for a specified number of times
consecutively, the UIM card is invalidated permanently. Contact your
service provider for a new card.
8
Locking the Keypad
In the standby mode, press and hold to lock the keypad. When
the keypad is locked, you can still answer an incoming call or make
emergency calls by pressing .
You can press and to unlock the keypad.
When the Keyguard function is enabled, if there is no operation on
the phone for a preset period in the standby mode, the keypad is
locked automatically.
Changing the Text Input Modes
The indicator of the current text input mode is displayed on the
screen. In the editing mode, press to change the input mode.
Note zIn the editing mode, press (Clear) once to delete
the letter on the left of the cursor. Press and hold
(Clear) to delete all the letters at a time.
zIn the "eZiEn" input mode, press to enter a space.
In the "ABC" or "abc" input mode, press once to
enter a space, twice to enter "0", and three times to
move the cursor to the next line.
zIn the "ABC" or "abc" input mode, press
repeatedly to enter the commonly used punctuations. In
the "eZiEn" input mode, press to enter a full stop.
9
Entering English (eZiEn)
In the "eZiEn" input mode, do the following to enter English letters:
1. Press each key only once according to the spelling sequence of
the desired word. Then the phone displays the commonly used
word according to the numeric sequence of key presses.
2. Press to scroll to the desired word.
3. Press to enter the word.
Press to enter the word and a space.
Entering English (ABC and abc)
In the "ABC" or "abc" input mode, you can press a key labeled the
desired letters once to enter the first letter on the key, twice to enter
the second letter on the key, and so on.
If the letter you want to enter is on the same key as the previous one,
you can enter the latter only after the cursor appears again or after
you press to move the cursor to the next space.
Entering Numbers
zIn the "123" input mode, press a key labeled the desired number.
zIn the "ABC" or "abc" input mode, press a numeric key
repeatedly or press and hold it until the desired number appears
on the screen.
zIn the "eZiEn" input mode, press a numeric key and then press
until the desired number appears on the screen.
Tabla de contenidos
Otros manuales de Teléfono móvil de Huawei
Huawei
Huawei C3100 Manual de usuario
Huawei
Huawei u8800 Guía de instalación
Huawei
Huawei U1215 Manual de usuario
Huawei
Huawei TAG-L13 Manual de usuario
Huawei
Huawei P8 lite Instrucciones de montaje
Huawei
Huawei Y9a Manual de usuario
Huawei
Huawei TAG-L03 Manual de usuario
Huawei
Huawei Ascend Y330 Manual de usuario
Huawei
Huawei U8180 Dimensiones
Huawei
Huawei Ascend Y215 Manual de usuario
Huawei
Huawei Honor MOA-LX9N Manual de usuario
Huawei
Huawei EDGE-U06 Manual de usuario
Huawei
Huawei U9500 Manual de usuario
Huawei
Huawei RIO-L01 Manual de usuario
Huawei
Huawei Y520-U33 Manual de usuario
Huawei
Huawei MAR-LX1A Manual de usuario
Huawei
Huawei Y7 Prime TRT-L21A Manual de usuario
Huawei
Huawei Y5 2017 Manual de usuario
Huawei
Huawei M865 Manual de usuario
Huawei
Huawei U2900 Manual de usuario
