Huawei LUNA2000 Series Manual de usuario
LUNA2000-(5-30)-S0
User Manual
Issue 01
Date 2020-10-20
HUAWEI TECHNOLOGIES CO., LTD.
Copyright © Huawei Technologies Co., Ltd. 2020. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specied in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees
or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every eort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: https://e.huawei.com
Issue 01 (2020-10-20) Copyright © Huawei Technologies Co., Ltd. i
About This Document
Purpose
This document describes the LUNA2000 battery in terms of its overview,
application scenarios, installation and commissioning, system maintenance, and
technical specications. The LUNA2000 battery consists of a LUNA2000-5KW-C0
power control module and LUNA2000-5-E0 battery expansion modules.
Intended Audience
This document is intended for:
● Sales engineers
● System engineers
● Technical support engineers
Symbol Conventions
The symbols that may be found in this document are dened as follows.
Symbol Description
Indicates a hazard with a high level of risk which, if not
avoided, will result in death or serious injury.
Indicates a hazard with a medium level of risk which, if not
avoided, could result in death or serious injury.
Indicates a hazard with a low level of risk which, if not
avoided, could result in minor or moderate injury.
Indicates warning information about device or environment
security which, if not avoided, could result in equipment
damage, data loss, performance deterioration, or unanticipated
results.
NOTICE is used to address practices not related to personal
injury.
LUNA2000-(5-30)-S0
User Manual About This Document
Issue 01 (2020-10-20) Copyright © Huawei Technologies Co., Ltd. ii
Symbol Description
Supplements the important information in the main text.
NOTE is used to address information not related to personal
injury, equipment damage, and environment deterioration.
Change History
Changes between document issues are cumulative. The latest document issue
contains all the changes made in earlier issues.
Issue 01 (2020-10-20)
This issue is the rst ocial release.
LUNA2000-(5-30)-S0
User Manual About This Document
Issue 01 (2020-10-20) Copyright © Huawei Technologies Co., Ltd. iii
Contents
About This Document................................................................................................................ ii
1 Safety Precautions...................................................................................................................1
1.1 General Safety.......................................................................................................................................................................... 1
1.2 Personnel Requirements....................................................................................................................................................... 3
1.3 Electrical Safety........................................................................................................................................................................4
1.4 Installation Environment Requirements.......................................................................................................................... 5
1.5 Transportation Requirements.............................................................................................................................................. 6
1.6 Mechanical Safety................................................................................................................................................................... 7
1.7 Commissioning......................................................................................................................................................................... 8
1.8 Maintenance and Replacement..........................................................................................................................................8
2 Product Introduction............................................................................................................ 10
2.1 Overview.................................................................................................................................................................................. 10
2.2 Appearance............................................................................................................................................................................. 13
2.3 Label Description.................................................................................................................................................................. 15
2.4 Features.................................................................................................................................................................................... 17
2.5 Working Mode....................................................................................................................................................................... 18
3 Application Scenarios and Settings.................................................................................. 20
3.1 Grid-tied ESS........................................................................................................................................................................... 20
3.1.1 Grid-tied ESS Networking............................................................................................................................................... 20
3.1.2 Setting the Grid-tied ESS Mode....................................................................................................................................23
3.2 Grid-tied and O-grid ESS.................................................................................................................................................28
3.2.1 Grid-tied and O-grid ESS Networking.....................................................................................................................28
3.2.2 Setting the Grid-tied and O-grid ESS Mode..........................................................................................................31
3.3 Pure O-grid ESS.................................................................................................................................................................. 33
3.3.1 Pure O-grid ESS Networking...................................................................................................................................... 33
3.3.2 Setting the Pure O-grid ESS Mode........................................................................................................................... 34
4 System Installation............................................................................................................... 36
4.1 Checking Before the Installation..................................................................................................................................... 36
4.2 Preparing Tools and Instruments.................................................................................................................................... 36
4.3 Determining the Installation Position............................................................................................................................38
4.4 Equipment Installation........................................................................................................................................................ 39
4.4.1 Floor-Mounted Installation............................................................................................................................................ 39
LUNA2000-(5-30)-S0
User Manual Contents
Issue 01 (2020-10-20) Copyright © Huawei Technologies Co., Ltd. iv
4.4.2 Wall-Mounted Installation............................................................................................................................................. 44
5 Electrical Connection............................................................................................................48
5.1 Preparing Cables................................................................................................................................................................... 49
5.2 Internal Electrical Connections of the Battery............................................................................................................ 50
5.2.1 Installing an Internal Ground Cable............................................................................................................................50
5.2.2 Installing Internal DC Terminals................................................................................................................................... 51
5.2.3 Connecting Internal Signal Cables...............................................................................................................................52
5.3 External Electrical Connections of the Battery........................................................................................................... 53
5.3.1 Installing a PE Cable.........................................................................................................................................................54
5.3.2 Installing DC Input Power Cables................................................................................................................................ 56
5.3.3 Installing a Signal Cable................................................................................................................................................. 57
5.4 (Optional) Cascading Batteries........................................................................................................................................ 60
5.5 Installing the Cover.............................................................................................................................................................. 62
6 System Commissioning........................................................................................................ 64
6.1 Verication Before Power-On........................................................................................................................................... 64
6.2 System Power-On................................................................................................................................................................. 65
6.3 Battery Commissioning....................................................................................................................................................... 66
6.3.1 Battery Deployment......................................................................................................................................................... 66
6.3.2 Battery Control................................................................................................................................................................... 67
6.3.3 Querying the Battery Status.......................................................................................................................................... 70
6.3.4 Battery Maintenance and Upgrade............................................................................................................................. 70
7 System Maintenance............................................................................................................ 73
7.1 System Power-O.................................................................................................................................................................73
7.2 Routine Maintenance.......................................................................................................................................................... 73
7.3 Troubleshooting..................................................................................................................................................................... 74
7.4 Battery Storage and Recharge..........................................................................................................................................80
8 Technical Specications....................................................................................................... 86
8.1 LUNA2000-5KW-C0.............................................................................................................................................................. 86
8.2 LUNA2000-5-E0..................................................................................................................................................................... 87
9 FAQ........................................................................................................................................... 88
9.1 How Do I Replace a Fuse?................................................................................................................................................. 88
A Acronyms and Abbreviations............................................................................................. 90
LUNA2000-(5-30)-S0
User Manual Contents
Issue 01 (2020-10-20) Copyright © Huawei Technologies Co., Ltd. v
1 Safety Precautions
1.1 General Safety
Declaration
Before installing, operating, and maintaining the equipment, read this document
and observe all the safety instructions on the equipment and in this document.
The "NOTICE", "WARNING", and "DANGER" statements in this document do not
cover all the safety instructions. They are only supplements to the safety
instructions. Huawei will not be liable for any consequence caused by the violation
of general safety requirements or design, production, and usage safety standards.
Ensure that the equipment is used in environments that meet its design
specications. Otherwise, the equipment may become faulty, and the resulting
malfunction, component damage, personal injuries, or property damage are not
covered under the warranty.
Follow local laws and regulations when installing, operating, or maintaining the
equipment. The safety instructions in this document are only supplements to local
laws and regulations.
Huawei will not be liable for any consequences of the following circumstances:
● Operation beyond the conditions specied in this document
● Installation or use in environments which are not specied in relevant
international or national standards
● Unauthorized modications to the product or software code or removal of the
product
● Failure to follow the operation instructions and safety precautions on the
product and in this document
● Equipment damage due to force majeure, such as earthquakes, re, and
storms
● Damage caused during transportation by the customer
● Damage caused by storage conditions that do not meet the requirements
specied in related documents
LUNA2000-(5-30)-S0
User Manual 1 Safety Precautions
Issue 01 (2020-10-20) Copyright © Huawei Technologies Co., Ltd. 1
General Requirements
D ANGER
Do not work with power on during installation.
● Do not install, use, or operate outdoor equipment and cables (including but
not limited to moving equipment, operating equipment and cables, inserting
connectors to or removing connectors from signal ports connected to outdoor
facilities, working at heights, and performing outdoor installation) in harsh
weather conditions such as lightning, rain, snow, and level 6 or stronger wind.
● After installing the equipment, remove idle packing materials such as cartons,
foam, plastics, and cable ties from the equipment area.
● In the case of a re, immediately leave the building or the equipment area,
and turn on the re alarm bell or make an emergency call. Do not enter the
building on re in any case.
● Do not scrawl, damage, or block any warning label on the equipment.
● Tighten screws using tools when installing the equipment.
● Understand the components and functioning of a grid-tied PV power system
and relevant local standards.
● Repaint any paint scratches caused during equipment transportation or
installation in a timely manner. Equipment with scratches cannot be exposed
to an outdoor environment for a long period of time.
● Do not open the host panel of the equipment.
● Without prior consent from the manufacturer, do not alter the internal
structure or installation procedure of the equipment.
● Ensure that battery terminal components are not aected during
transportation. Do not hoist or move batteries by using battery terminal bolts.
Personal Safety
● Wear proper personal protective equipment (PPE) during operation. If there is
a probability of personal injury or equipment damage, immediately stop the
operations, report the case to the supervisor, and take feasible protective
measures.
● Use tools correctly to avoid hurting people or damaging the equipment.
● Do not touch the energized equipment, as the enclosure is hot.
● To ensure personal safety and normal use of the equipment, the equipment
must be reliably grounded before use.
● When a battery is faulty, the temperature may exceed the burn threshold of
the touchable surface. Therefore, avoid touching the battery.
● Do not disassemble or damage the battery. The released electrolyte is harmful
to your skin and eyes. Avoid contact with the electrolyte.
● Do not place irrelevant objects on the top of the equipment or insert them
into any position of the equipment.
● Do not place inammables around the equipment.
LUNA2000-(5-30)-S0
User Manual 1 Safety Precautions
Issue 01 (2020-10-20) Copyright © Huawei Technologies Co., Ltd. 2
● To prevent explosions and body injury, do not place batteries in a re.
● Do not place the battery module in water or other liquids.
● Do not short-circuit wiring terminals of batteries. Short circuits can cause a
re.
● Batteries may cause electric shocks and high short-circuit currents. When
using the battery, pay attention to the following points:
(a) Remove any metal objects from yourself, such as watches and rings.
(b) Use tools with insulated handles.
(c) Wear rubber gloves and boots.
(d) Do not place tools or metal parts on top of batteries.
(e) Before connecting or disconnecting battery terminals, disconnect the
charging power supply.
(f) Check whether batteries are accidentally grounded. If it is accidentally
grounded, remove the power supply from the ground. Touching any part of a
grounded battery can cause an electric shock. If these grounding points are
removed during installation and maintenance, the possibility of electric shocks
can be reduced.
● Do not use water to clean electrical components inside or outside of a
cabinet.
● Do not stand on, lean on, or sit on the top of the equipment.
● Do not damage the modules of the equipment.
1.2 Personnel Requirements
● Personnel who plan to install or maintain Huawei equipment must receive
thorough training, understand all necessary safety precautions, and be able to
correctly perform all operations.
● Only qualied professionals or trained personnel are allowed to install,
operate, and maintain the equipment.
● Only qualied professionals are allowed to remove safety facilities and inspect
the equipment.
● Personnel who will operate the equipment, including operators, trained
personnel, and professionals, should possess the local national required
qualications in special operations such as high-voltage operations, working
at heights, and operations of special equipment.
● Only professionals or authorized personnel are allowed to replace the
equipment or components (including software).
NO TE
● Professionals: personnel who are trained or experienced in equipment operations
and are clear of the sources and degree of various potential hazards in equipment
installation, operation, and maintenance
● Trained personnel: personnel who are technically trained, have required experience,
are aware of possible hazards on themselves in certain operations, and are able to
take protective measures to minimize the hazards on themselves and other people
● Operators: operation personnel who may come in contact with the equipment,
except trained personnel and professionals
LUNA2000-(5-30)-S0
User Manual 1 Safety Precautions
Issue 01 (2020-10-20) Copyright © Huawei Technologies Co., Ltd. 3
1.3 Electrical Safety
Grounding Requirements
● For the equipment that needs to be grounded, install the protective earthing
(PE) cable rst when installing the equipment and remove the PE cable last
when removing the equipment.
● Do not damage the ground conductor.
● Do not operate the equipment in the absence of a properly installed ground
conductor.
● Ensure that the equipment is connected permanently to the protective
ground. Before operating the equipment, check the electrical connection to
ensure that it is securely grounded.
General Requirements
D ANGER
Before connecting cables, ensure that the equipment is intact. Otherwise, electric
shocks or re may occur.
● Ensure that all electrical connections comply with local electrical standards.
● Obtain approval from the local electric utility company before using the
equipment in grid-tied mode.
● Ensure that the cables you prepared meet local regulations.
● Use dedicated insulated tools when performing high-voltage operations.
DC Operation
D ANGER
Do not connect or disconnect power cables with power-on. Transient contact
between the core of the power cable and the conductor will generate electric arcs
or sparks, which may cause re or personal injury.
● Before connecting cables, switch o the disconnector on the upstream
equipment to cut o the power supply if people may contact energized
components.
● Before connecting a power cable, check that the label on the power cable is
correct.
● If the equipment has multiple inputs, disconnect all the inputs before
operating the equipment.
LUNA2000-(5-30)-S0
User Manual 1 Safety Precautions
Issue 01 (2020-10-20) Copyright © Huawei Technologies Co., Ltd. 4
Otros manuales para LUNA2000 Series
1
Este manual sirve para los siguientes modelos
6
Tabla de contenidos
Otros manuales de Accesorios para cámaras de Huawei
Huawei
Huawei LUNA2000-2.0MWH-1H0 Manual de usuario
Huawei
Huawei iBattery 3.0 Manual de usuario
Huawei
Huawei LUNA2000-30-S0 Manual de usuario
Huawei
Huawei UPS2000-A-1 kVA Manual de usuario
Huawei
Huawei LUNA2000-NHS0 Manual de usuario
Huawei
Huawei HW-Li2Ah Manual de usuario
Huawei
Huawei PDC-0250 Manual de usuario
