HPE ProLiant DL180 Gen9 Instrucciones de montaje
MF877-00 Page 1
Template Revision C, 30-July-2018
Copyright 2018 Hewlett Packard Enterprise Development LP
HPE instructions for this template are available at MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Servers
Marketing Name / Model
[List multiple models if applicable.]
HPE ProLiant DL180 Gen9
Name / Model #2
Name / Model #3
Name / Model #4
Name / Model #5
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HPE products to remove components and materials requiring selective treatment, as defined by
Directive 2012/19/EU of the European Parliament and of the Council on Waste Electrical and Electronic Equipment
(WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
8
Batteries
All types including standard alkaline and lithium
coin or button style batteries
2
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Includes background illuminated displays with gas
discharge lamps
0
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB/PCT)
0
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
Depending on Power Supply
2
External electrical cables and cords
0
Gas Discharge Lamps
0
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0
Components and waste containing asbestos
0
MF877-00 Page 2
Template Revision C, 30-July-2018
Copyright 2018 Hewlett Packard Enterprise Development LP
HPE instructions for this template are available at MF877-01
Item Description
Notes
Quantity
of items
included
in product
Components, parts and materials containing
refractory ceramic fibers
0
Components, parts and materials containing
radioactive substances
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Torx Driver
T15
Torx Driver
T10
Description #3
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. System Board Battery - Locate the battery on the system board. Use a medium flat head screwdriver or fingers to
remove the battery and dispose of properly.
2. Capacitors=>2.5 cm - Remove the PSU from the system. With screw driver, remove the screws securing the top cover,
locate the capacitors and use a medium flat head screwdriver to remove them and dispose of properly.
3. Pull the MEGACELL Holder and the Air Baffle to get them out of the chassis and dispose of properly.
4.
5.
6.
7.
8.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
Attachment 1
Attachment 1 –System Battery Location
Attachment 2 and 3 –Cap Location in PSU
Attachment 4 –MEGACELL Holder and Air Baffle Location
Tabla de contenidos
Otros manuales de Servidor de HPE
HPE
HPE ProLiant ML110 Gen10 Manual de usuario
HPE
HPE ProLiant DL560 Gen10 Manual de usuario
HPE
HPE ProLiant ML350 Gen9 Manual de usuario
HPE
HPE R8000/3 Instrucciones de montaje
HPE
HPE ProLiant DL380 Gen10 Plus Manual de usuario
HPE
HPE ProLiant ML10 Gen9 Manual
HPE
HPE ProLiant DL325 Gen10 Plus Manual de usuario
HPE
HPE ProLiant DL325 Gen10 Plus Manual de usuario
HPE
HPE Cloudline CL3150 G4 Instrucciones de montaje
HPE
HPE ProLiant XL740f Gen9 Instrucciones de funcionamiento
HPE
HPE ProLiant ML110 Gen10 Manual
HPE
HPE ProLiant ML350 Gen11 Guía de instalación y uso
HPE
HPE ProLiant BL460c Gen10 Manual de usuario
HPE
HPE ProLiant DL380 Gen9 Instrucciones de montaje
HPE
HPE ProLiant XL270d Gen9 Manual de usuario
HPE
HPE ProLiant DL380 Gen11 Manual
HPE
HPE ProLiant Gen9 Manual de usuario
HPE
HPE ProLiant Manual de usuario
HPE
HPE ProLiant ML30 Gen10 Plus Manual
HPE
HPE ProLiant MicroServer Gen10 Manual de usuario
