HPE Edgeline EL1000 Instrucciones de montaje

MF877-00

Template Revision A

Page

HPE instructions for this template are available at MF877-01

Product End-of-Life Disassembly Instructions

Product Category: Servers

Marketing Name / Model

[List multiple models if applicable.]

HPE Edgeline EL1000

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions

for the disassembly of HPE products to remove components and materials requiring selective treatment, as defined by EU

directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

1.1

Items listed below are classified as requiring selective treatment.

1.2

Enter the quantity of items contained within the product which require selective treatment in the right column, as

applicable.

ItemDescription

Notes

Quantity

of items

included

in product

Printed Circuit Boards (PCB) or Printed Circuit

Assemblies (PCA)

With a surface greater than 10 sq cm

Batteries

All types including standard alkaline and lithium

coin or button style batteries

Mercury-containingcomponents

For example, mercury in lamps, display backlights,

scanner lamps, switches, batteries No

Liquid Crystal Displays (LCD) with a surface

greater than 100 sq cm

Includes background illuminated displays with gas

discharge lamps No

Cathode RayTubes (CRT)

Capacitors / condensers (Containing PCB/PCT)

Electrolytic Capacitors / Condensers measuring

greater than 2.5 cm in diameter or height

Depends on PSU Module

External electrical cables and cords

Gas Discharge Lamps

Plastics containing Brominated Flame Retardants

weighing > 25 grams (not including PCBs or PCAs

already listed as a separate item above)

Components and parts containing toner and ink,

including liquids, semi-liquids (gel/paste) and toner

Include the cartridges, print heads, tubes, vent

chambers, and service stations. No

Components and waste containing asbestos

1.0 Items Requiring Selective Treatment

MF877-00

Template Revision A

Page

HPE instructions for this template are available at MF877-01

ItemDescription

Notes

Quantity

of items

included

in product

Components, parts and materials containing

refractoryceramic fibers

Components, parts and materials containing

radioactivesubstances

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components

and materials requiring selective treatment can be removed.

Tool Description

Tool Size (if

applicable)

Torx Driver

T-10/15

PhilpsScrewdriver

Description #3

Description #4

Description #5

3.0 Product Disassembly Process

3.1

List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

System Board Battery (1G/10G I/O Board)

Remove 2 screws on rear side of Juno Chassis with T-10 Driver.

Slide Hood and remove 2 Black Screw with T15 Driver to detach PCIe/PXIe Baseboard Kit.

Remove 2 HDD Cage Screw with T10 Driver than you could

Capacitance

Capacitance which is inserted byoperator

let tin touch the two pin of the capacitance

second, soldering tin the points with Soldering Station which set the temperature to 330

10oC for L/F model , if non-L/F model, set the temperature to 300

10oC, remove capacitance from PCB after tin completely melting, and then put it into Recycled Box(Remark:if

capacitance which is disassembled is GND ,Set the Soldering Station(Gao Zhou)temperature to 300 �10oC,

remove capacitance from PCB after tin completely melting,

Put it into Recycled Box

(Remark: if capacitance which is disassembled is GND, Set the Soldering Station (Gao Zhou)

Capacitors in 800W/500W PSU

2.5 cm Pull down the lid to release the power supply from Chassis

Removing 2 screw on the Bottom Side with T15 Driver

Removing 1 screw on the Right Side with Philips Driver

Removing 4 screw on the Fan Module

Open its cover and locate the capacitors and pry from the PCB with a flat head screw driver or long nose plier and

dispose of properly.

MF877-00

Template Revision A

Page

HPE instructions for this template are available at MF877-01

3.2

Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items

contained in the product that require selective treatment (with descriptions and arrows identifying locations)

Attachment 1 - System Exploding Drawing

Attachment 2- System BatteryLocation

Attachment 3 –Remove Fan Kit

Attachment 4 - Remove 500W/800W PSU

Attachment 5 –PSU Capacitor Location

MF877-00

Template Revision A

Page

HPE instructions for this template are available at MF877-01

Attachment 1- Edgeline EL1000 System Exploding Drawing

Attachment 2- System Battery Location - 10G I/O

Board

Location: BT1

MF877-00

Template Revision A

Page

HPE instructions for this template are available at MF877-01

Attachment 3- Remove Fan Kit

Remove 2 screws with T15 Driver to release the cage and lift up the cage

Pinch the red holder to remove the fans.

MF877-00

Template Revision A

Page

HPE instructions for this template are available at MF877-01

Attachment 4- Remove 800/500W PSU

Pull down the lock and hold the holder to pulled out the module

MF877-00

Template Revision A

Page

HPE instructions for this template are available at MF877-01

Attachment 5-

Remove 800W PSU Capacitor Location

Remove 500W PSU Capacitor Location

Tabla de contenidos

Otros manuales de Servidor de HPE

HPE

HPE Edgeline EL300 Manual de usuario

HPE

HPE ProLiant DL80 Gen9 Manual

HPE

HPE AlphaServer 8200 Guía de inicio rápido

HPE

HPE ProLiant XL645d Manual de usuario

HPE

HPE ProLiant DL20 Gen9 Manual

HPE

HPE ProLiant DL560 Gen10 Manual

HPE

HPE ProLiant BL660c Manual

HPE

HPE ProLiant DL20 Gen10 Manual de usuario

HPE

HPE ProLiant DL325 Gen10 Plus Manual de usuario

HPE

HPE ProLiant XL170r Gen10 Instrucciones de montaje

HPE

HPE ProLiant XL260a Gen9 Instrucciones de montaje

HPE

HPE ProLiant DX380 Gen10 Manual de usuario

HPE

HPE ProLiant DL360 Gen10 Instrucciones de instalación

HPE

HPE Edgeline EL300 Instrucciones de montaje

HPE

HPE ProLiant Gen9 Manual de usuario

HPE

HPE ProLiant MicroServer Gen10 Manual de usuario

HPE

HPE ProLiant ML110 Gen9 Manual

HPE

HPE R8000/3 Instrucciones de montaje

HPE

HPE Edgeline EL4000 Manual de usuario

HPE

HPE ProLiant DL180 Gen9 Instrucciones de montaje

HPE

HPE Apollo 2000 Manual de usuario

HPE

HPE ProLiant MicroServer Gen10 Manual

HPE

HPE Integrity rx2800 i2 series Manual de usuario

HPE

HPE ProLiant XL230k Gen10 Manual

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario