HPC Hydraulics HPC312 Manual de usuario
1
USER MANUAL
HPC312 –HPC324
Please read this manually carefully before using the system
and hold on to it for future reference.
www.hpc-hydraulics.com
2
3
THANK YOU FOR CHOOSING HPC-HYDRAULICS
When installing and using the HPC levelling system, always carefully read this manual. Under no
circumstances will HPC Hydraulics be liable for any direct or indirect damage resulting from the use
or inability to use this documentation or this product.
HPC Hydraulics reserves the right to, at any time without prior or direct notification to the customer,
to change parts of the product.
Do not remove the official registration number on the product. It must be used in the event of
maintenance and warranty.
4
GENERAL SAFETY MEASURES
•Do not work under the vehicle when it is standing on jacks.
•Always ensure that the vehicle is blocked and unable to move before operating the hydraulic
levelling system.
•If present, shut off the air suspension system, but do ensure that air remains in the bellows
to prevent damage. Take measures to ensure that the pressure does not automatically adjust
during levelling.
•Wear safety glasses during installation and checking of the system.
•Prevent body parts (such as eyes and hands) from coming into contact with the released
fluids. The oil in the levelling system can be under high pressure, possibly causing serious
injuries to the skin. Immediately consult a doctor in the case of an accident.
•Never carry out repairs yourself in the event of malfunctions and/or repairs to the hydraulic
levelling system.
PRECAUTIONS BEFORE DRIVING
Every time before the vehicle is moved, visually inspect if the jacks are completely retracted. If this is
not the case, please follow the jack retraction procedure.
Do not exclusively rely on the system. The driver always remains responsible
and must check that all jacks are retracted before driving away.
5
LEVELLING SAFETY MEASURES
•Park the vehicle on a surface that is as flat as possible.
•Check if the surface on which the jacks will rest is preferably flat, not slippery, and free of
debris, rocks, etc.
•When parking on a soft surface, plates or blocks must be used under the bases of the
jacks, to prevent the supports sinking into the ground.
•The handbrake must be engaged before the system can be operated. Without an
engaged handbrake, the system will not function.
•The gear must be set to neutral or park.
•Ensure that the system has enough voltage. if necessary, start the vehicle during leveling
if the voltage is insufficient.
•Maintain distance from the vehicle, slide-outs, awnings, doors, steps, etc. The vehicle can
move in all directions when deploying or retracting the jacks.
•In order to achieve the most accurate result possible, it is advised to operate the system
from outside the vehicle or otherwise avoid moving when inside the vehicle.
•Press the STOP button on the control panel at any time if the operation must be
interrupted.
•If the operation has been interrupted, all jacks must be retracted. After that, you can
start over.
•ALWAYS check if all jacks are resting properly on the ground.
•Disengage the vehicle's ignition when the system is ready.
•NEVER MOVE THE VEHICLE WHEN ONE OR MORE JACKS ARE DEPLOYED.
6
TABLE OF CONTENTS
GENERAL SAFETY MEASURES............................................................................................................................................................................. 4
LEVELLING SAFETY MEASURES........................................................................................................................................................................... 5
1. OPERATION ............................................................................................................................................................................................. 7
1.1 GENERAL INFORMATION.............................................................................................................................................................. 7
1.2 START-UP ..................................................................................................................................................................................... 8
1.3 LANGUAGE SETTINGS................................................................................................................................................................... 9
1.4 LEVELING FUNCTIONS .................................................................................................................................................................. 9
1.5 MANUAL AND AUTOMATIC CONTROLS ..................................................................................................................................... 10
1.6 CHANGING AUTOLEVEL 1 EN AUTOLEVEL 2 ............................................................................................................................... 12
2. ADDITIONAL OPTIONS........................................................................................................................................................................... 13
2.1 OPERATING SLIDE-OUTS............................................................................................................................................................. 13
2.2 HPC APP INSTALLATION AND OPERATION ................................................................................................................................. 14
3. MAINTENANCE...................................................................................................................................................................................... 17
3.1 OIL.............................................................................................................................................................................................. 17
3.2 ELECTRICAL................................................................................................................................................................................. 17
3.3 JACKS.......................................................................................................................................................................................... 18
4. EMERGENCY CONTROLS........................................................................................................................................................................ 19
4.2 TROUBLESHOOT ......................................................................................................................................................................... 20
5. DEALER INFORMATION ......................................................................................................................................................................... 21
5.1 SERVICE AND MAINTENANCE..................................................................................................................................................... 22
7
1. OPERATION
1.1 GENERAL INFORMATION
8
1.2 START-UP
When the system is started, the HPC logo will
be displayed.
The screen will go into standby mode if it is
not used for about a minute. By touching the
screen, it will turn on again.
Tap the red lock until it turns green.
The left screen will appear. Accept by
checking the box to indicate that the safety
warning has been read and understood.
Press [Continue] to continue.
9
1.3 LANGUAGE SETTINGS
Usually the right language is preprogrammed. If this is not the case or if it needs to be changed, this
can be done via the main menu. Select the following symbol as shown in the left image.
A screen with different flags will appear. The highlighted flag is the language that is currently set.
Select the desired flag; it will be highlighted.
Press ◄to go back to the previous screen.
1.4 LEVELING FUNCTIONS
Auto lvl 1 Automatic levelling based on a pre-set value.
Auto lvl 2 Automatic setting based on a pre-set value. This setting is not necessarily level.
Tank Automatic programmed slant intended to drain waste water.
Stabilize Automatically deploying the jacks based on pressure. The vehicle will not be lifted,
and the wheels will stay on the ground.
Manual Manually operating the jacks. This is always done per two jacks.
Retract Automatically retract all jacks.
10
1.5 MANUAL AND AUTOMATIC CONTROLS
In the main screen, press [Leveling]. A new option will appear. Select [Manual] and the screen below
will appear.
The jacks are controlled in pairs, Left, Right, Front, and Back. Select the side to be controlled by
pressing the letter. It will highlight. Use the buttons [Retract] and [Extend] to operate the jacks.
Use the button [IN] to automatically retract all jacks.
The jacks will show different colors depending on their position.
Green The jacks are fully retracted.
Orange The jacks are between the retracted and deployed position.
Orange (blinking) The jacks are moving.
Blue The jacks are deployed.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
