HP ProCurve 1600M Instrucciones de instalación

Product End-of-Life Disassembly Instructions

Product Category: Networking Equipment

Marketing Name / Model

[List multiple models if applicable.]

ProCurve 4000m/8000m Redundant Power Supply (J4119A)

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions

for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU

directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment.

1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as

applicable.

Item Description Notes

Quantity

of items

included

in product

Printed Circuit Boards (PCB) or Printed Circuit

Assemblies (PCA) With a surface greater than 10 sq cm

Batteries All types including standard alkaline and lithium coin

or button style batteries 0

Mercury-containing components For example, mercury in lamps, display backlights,

scanner lamps, switches, batteries 0

Liquid Crystal Displays (LCD) with a surface greater

than 100 sq cm Includes background illuminated displays with gas

discharge lamps 0

Cathode Ray Tubes (CRT) 0

Capacitors / condensers (Containing PCB/PCT) 0

Electrolytic Capacitors / Condensers measuring

greater than 2.5 cm in diameter or height 2

External electrical cables and cords 0

Gas Discharge Lamps 0

Plastics containing Brominated Flame Retardants 0

Components and parts containing toner and ink,

including liquids, semi-liquids (gel/paste) and toner Include the cartridges, print heads, tubes, vent

chambers, and service stations. 0

Components and waste containing asbestos 0

Components, parts and materials containing

refractory ceramic fibers 0

Components, parts and materials containing

radioactive substances 0

EL-MF877-00 Page 1

Template Revision A

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components

and materials requiring selective treatment can be removed.

Tool Description Tool Size (if

applicable)

Torx Driver # 10

Wire cutter Medium

Pliers Medium

Flat blade screwdriver Medium

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

1. Remove all external screws from power supply. (typically 4 screws)

2. Slide top half toward the rear to separate the two halves of the case.

3. Cut the wires connecting the PCA to the connector.

4. Remove the ground wire from the case using a medium flat blade.

5. Remove mounting screws holding PCA to bottom cover.

6. Using pliers, break off (2) electrolytic capacitors off the PCA.

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items

contained in the product that require selective treatment (with descriptions and arrows identifying locations).

EL-MF877-00 Page 2

Template Revision A

Otros manuales para ProCurve 1600M

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Servidor de HP

HP E8400A C-Size VXI Mainframe Guía de solución de problemas

HP X510 Manual de usuario

HP RP7405/7410 Manual de usuario

HP ProLiant DL288 GENERATION 6 Manual de usuario

HP ProLiant XL250a Gen9 Instrucciones de uso

HP ProLiant DL560 Gen8 Manual de usuario

HP NetServer LH 4 Manual de usuario

HP Cluster Platform Introduction v2010 Manual de usuario

HP mt40 Instrucciones de montaje

HP CL2100 G3 807S Instrucciones de funcionamiento

HP ProLiant ML115 G5 Guía de inicio rápido

HP HPE ProLiant DX360 Gen10 Manual de usuario

HP NetServer AA 4000 Manual de usuario

HP NetServer LC 3 Manual de usuario

HP ProLiant m350 Instrucciones de funcionamiento

HP Integrity rx4610 Manual de usuario

HP ProLiant DL385p Manual de usuario

HP RDX REMOVABLE DL380 Instrucciones de uso

HP 345646-001 - StorageWorks NAS 2000s External Storage... Manual de usuario

HP AlphaServer ES47 Manual de usuario

HP ProLiant SL230s Manual de usuario

HP Apollo 2000 System Manual

HP ProLiant DL585 Manual

HP NetServer LXr 8500 Manual de usuario

Manuales populares de Servidor de otras marcas

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

Milestone

Milestone Husky IVO 350T Manual de usuario

Planet

Planet NAS-7410 Manual de usuario

Lenovo

Lenovo ThinkSystem SR635 V3 Manual de usuario

Dell

Dell PowerEdge HS5610 Manual