HP Integrity rx2660 Manual de usuario

RX2660BOOT DISK ENTRY

Effective:

12/18/18

Revision:

All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written

permission of HSQ Technology is prohibited.

PAGE: 1 of 11

Adding a Boot Disk Entry to an

HP Integrity rx2660

Necessary Items

•Terminal Emulator application (e.g., PuTTY).

•Hard drive to be mounted.

Overview

In order to boot an rx2660 to a “new” disk, it is necessary to add an entry to the list of devices the rx2660 will try

to boot from (i.e., add a boot entry).

•Connect to the Management Processor (MP).

•Power on the rx2660.

•From the MP, connect to the Console Terminal (CO) and watch the Power On Self Test (POST) and early

boot.

•When the Extensible Firmware Interface (EFI) Menu appears, go to Add Boot Option and add the Boot

Option for the disk.

•Still in the EFI Menu, go to Change Boot Order and move your disk to the top of the list.

•Boot from the disk.

RX2660BOOT DISK ENTRY

All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written

permission of HSQ Technology is prohibited.

PAGE: 2 of 11

Details

In this example, a network connection is made to the Management Processor PDQVCA, which is in an rx2660

that plays the role of PDQVSA in the PDQ system.

1. With the rx2660 initially powered OFF (but still plugged in), insert the new hard drive into an available

slot.

2. Launch a PuTTY session and select either the Telnet or SSH radio button.

3. Connect to the MP and enter the Command Menu (CM). From any running workstation.

PDQVS1$ ssh "[email protected]0.226"

Admin's password:

– OR –

PDQVS1$ telnet "[email protected]"

Admin's password:

NOTE: When using SSH, nothing appears in response to keystrokes, not even dots or asterisks.

Authentication successful.

Hewlett-Packard Integrity Integrated Lights-Out 2

MP Host Name: pdqvca

Revision F.02.26

MP MAIN MENU:

CO: Console

VFP: Virtual Front Panel

CM: Command Menu

SMCLP: Server Management Command Line Protocol

CL: Console Log

SL: Show Event Logs

HE: Main Help Menu

X: Exit Connection

[pdqvca] MP> CM

4. Power up the main part of the rx2660.

[pdqvca] MP:CM> pc -on

PC -on

System will be powered on.

Confirm? (Y/[N]): y

-> System is being powered on.

-> Command successful.

[pdqvca] MP:CM>

RX2660BOOT DISK ENTRY

All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written

permission of HSQ Technology is prohibited.

PAGE: 3 of 11

5. Return to the Main Menu (<Ctrl-b>) and go to the Console (CO) to monitor the early boot. This may take

a little while.

MP MAIN MENU:

CO: Console

VFP: Virtual Front Panel

CM: Command Menu

SMCLP: Server Management Command Line Protocol

CL: Console Log

SL: Show Event Logs

HE: Main Help Menu

X: Exit Connection

[pdqvca] MP> co

[Use Ctrl-B or ESC-( to return to MP main menu.]

- - - - - - - - - - Prior Console Output - - - - - - - - - -

* POST-MISERnet startup at 21-NOV-2018 10:45:56.58 *

*******************************************************************

SYSTEM job terminated at NOVEMBER 21, 2018 10:45 AM

Accounting information:

Buffered I/O count: 9029 Peak working set size: 9824

Direct I/O count: 3561 Peak virtual size: 250112

Page faults: 22792 Mounted volumes: 0

Charged CPU time: 0 00:00:02.49 Elapsed time: 0 00:00:31.53

- - - - - - - - - - - - Live Console - - - - - - - - - - - -

***********************************************************

* ROM Version : 04.32

* ROM Date : 05/21/2013

* BMC Version : 05.26

***********************************************************

0 0 0x0015B2 0x0000000018719204 boot time event

…

RX2660BOOT DISK ENTRY

All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written

permission of HSQ Technology is prohibited.

PAGE: 4 of 11

6. When the EFI Boot Manager Menu appears, press the Down arrow key to move the cursor to Boot

Configuration, and then press <Enter>. This must be done quickly as there is about fifteen seconds to

respond.

NOTE: If more than one bootable disk is inserted, then multiple entries will appear instead of the one (two-line)

entry seen in this example. The first entry will be for the bootable disk in the lowest-numbered slot.

RX2660BOOT DISK ENTRY

All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written

permission of HSQ Technology is prohibited.

PAGE: 5 of 11

7. In the dialog box, navigate to Add Boot Entry and press <Enter>. A message will display while the

machine searches for a bootable device (this should take less than thirty seconds).

8. Navigate to the proper device (typically the top entry) and press <Enter>.

RX2660BOOT DISK ENTRY

All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written

permission of HSQ Technology is prohibited.

PAGE: 6 of 11

9. There is no option on this step, you must select EFI. Press <Enter> again and wait for the screen to

refresh.

10. Navigate to the VMS line and press <Enter>.

RX2660BOOT DISK ENTRY

All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written

permission of HSQ Technology is prohibited.

PAGE: 7 of 11

11. Navigate to the line that reads VMS_LOADER.EFI and press <Enter>.

NOTE: It may be necessary to move the cursor past the end of the page.

12. Enter a description for the hard drive (e.g., PDQVSA).

RX2660BOOT DISK ENTRY

All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written

permission of HSQ Technology is prohibited.

PAGE: 8 of 11

13. At the next prompt, leave the Load Option blank and press <Enter>. Type <y> at the Save changes to

NVRAM? prompt.

14. When the screen refreshes, navigate to Edit OS Boot Order and press <Enter>.

RX2660BOOT DISK ENTRY

All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written

permission of HSQ Technology is prohibited.

PAGE: 9 of 11

15. Highlight PDQVSA and press <Enter>, the word will turn yellow. Press the Up arrow until PDQVSA is the

topmost entry. Press <Enter> again to lock it into its new position.

16. Press <Enter> and the color will change back.

17. Press <Esc> twice to return to the Boot Menu. The new drive will now display at the top of the list.

RX2660BOOT DISK ENTRY

All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written

permission of HSQ Technology is prohibited.

PAGE: 10 of 11

18. Press <Enter>, this will begin rebooting the machine.

19. After the machine has rebooted, press <Ctrl-b> to return to the Main Menu.

Otros manuales para Integrity rx2660

Tabla de contenidos

Otros manuales de Servidor de HP

HP 9000 V2200 Manual de instalación y operación

HP t5400 - Thin Client Manual de usuario

HP CL2100 G3 807S Instrucciones de funcionamiento

HP D7171A - NetServer - LPr Manual de operación y mantenimiento

HP Blade bc1000 Manual

HP Integrity rx1620 Manual de usuario

HP ProLiant DL370 Manual de referencia

HP DL385 - ProLiant - G5 Instrucciones de uso

HP ProLiant DL560 Generation9 Instrucciones de uso

HP ML150 - ProLiant - G6 Instrucciones de uso

HP ProLiant DL160 Gen9 Manual

HP ProLiant SL250s Gen8 Manual de usuario

HP ProLiant BL495c Generation 6 (G6) Manual de usuario

HP Cluster Platform Express v2010 Manual de usuario

HP DL320 - ProLiant - G3 Hoja de especificaciones

HP ProLiant ML310 Generation 5p Instrucciones de funcionamiento y seguridad

HP PROLIANT BL45P Instrucciones de uso

HP t5740 - Thin Client Manual de usuario

HP BL35p - ProLiant - 2 GB RAM Manual de usuario

HP ProLiant SL170s - G6 Server Manual

HP BL480c - ProLiant - 4 GB RAM Manual de usuario

HP ProLiant ML350 G5 Instrucciones de uso

HP Workstation zx6000 Guía de inicio rápido

HP ProLiant DL560 Instrucciones de uso

Manuales populares de Servidor de otras marcas

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

Milestone

Milestone Husky IVO 350T Manual de usuario

Planet

Planet NAS-7410 Manual de usuario

Lenovo

Lenovo ThinkSystem SR635 V3 Manual de usuario

Dell

Dell PowerEdge HS5610 Manual