HP Cluster Platform Hardware Kits v2010 Manual de usuario

HP Cluster Platform

ProCurve 5406zl CX4 Cable Management

Brackets Installation Guide

HP Part Number: 5991-7986

Published: June 2007

The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express

warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP

shall not be liable for technical or editorial errors or omissions contained herein.

Printed in the U.S.A.

Table of Contents

1 Preparing for Installation................................................................................................9

1.1 Audience...........................................................................................................................................9

1.2 Documentation Resources.................................................................................................................9

1.3 Kit Description..................................................................................................................................9

1.4 Kit Contents.......................................................................................................................................9

1.5 Required Resources.........................................................................................................................10

2 Installing the Cable Management Brackets...............................................................11

2.1 Cable Routing Options....................................................................................................................12

2.2 Removing the Interconnect for Servicing........................................................................................13

Table of Contents 3

List of Figures

1-1 Cable Management Brackets...........................................................................................................9

2-1 Attaching the Cable Management Brackets..................................................................................11

2-2 Cable Routing Options..................................................................................................................12

List of Tables

1-1 Fasteners........................................................................................................................................10

1 Preparing for Installation

1.1 Audience

This guide is intended for HP service representatives and other persons trained to install hardware

options in the HP 10000 series racks. Such persons are expected to understand the hazards of

working in this environment and to take suitable precautions to minimize danger to themselves

and others.

1.2 Documentation Resources

You can download the documentation for components referenced in this installation guide from

the following locations or access specific manuals and guides from the CD that is shipped with

your HP Cluster Platform solution:

HP 10K Series Rack (Documentation

option):

http://h18004.www1.hp.com/products/servers/proliantstorage/racks

HP Cluster Platform: http://www.hp.com/techservers/clusters/xc_clusters.html

HP ProCurve Networking: http://www.hp.com/rnd/products/index.htm and the HP

Cluster Platform Gigabit Ethernet Interconnect Guide

1.3 Kit Description

The cable management brackets described in this manual are designed to align and support

cables that lead from an HP ProCurve 5406zl system interconnect to the PCI interface cards

installed in each server (node). The brackets provide strain relief, ensure the correct bend radius

for the cables, and provide cable routing and cable management.

1.4 Kit Contents

This kit contains the following components:

• The cable management brackets shown in Figure 1-1.

Figure 1-1 Cable Management Brackets

The following list describes the callouts shown in Figure 1-1:

1.1 Audience 9

Right side cable management bracket (left side not shown)1.

2. Note that the top channel for both the right and left brackets is narrower than the rest

of the channels (right side shown).

Note:

The right bracket is shown in Figure 1-1. The left bracket (not shown) is exactly opposite

from the right bracket.

• The fasteners that are specified in Table 1-1.

Table 1-1 Fasteners

DescriptionTorqueFormatSizeQty.

Cage nut for M6 x 16mm screw.N/ASquare nutM6 cage nuts4

Machine screw, Phillips head. For use with the cage

nut.

30 in/lbPhillips

(Posidrive)

M6 x 16 mm

screws

• Packaging and documentation.

To prevent screws from becoming loose due to vibration, HP recommends using an adjustable

torque driver set to the torque specifications shown in Table 1-1. Contact your HP sales

representative if any parts are missing.

1.5 Required Resources

To install the kit, you need the following resources:

• Tools:

— Screwdriver, #2 (medium) Phillips.

— Cage-nut insertion tool (shipped with the rack) or a flat-bladed screwdriver.

— Marker pen or masking tape.

• Resources: A sample cable of the type used by the system interconnect.

• Environment:

— A work surface adjacent to the rack.

— A stable work platform or step stool that lets you safely reach the servers installed in

the upper part of the rack.

10 Preparing for Installation

Otros manuales para Cluster Platform Hardware Kits v2010

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Servidor de HP

HP BL870c i2 Integrity Manual de usuario

HP Tc4100 - Server - 256 MB RAM Manual de instrucciones

HP t5400 - Thin Client Manual de usuario

HP Integrity Superdome 16-socket Manual de usuario

HP SA1120 - Web Hosting Server Appliances Manual de usuario

HP t5335 - Thin Client Manual de operación y mantenimiento

HP ProLiant SL270s Generation 8 Instrucciones de uso

HP D7171A - NetServer - LPr Manual de usuario

HP ProLiant DL20 Gen10 Manual de usuario

HP Tc2120 - Server - 256 MB RAM Manual de instrucciones

HP D5970A - NetServer - LCII Manual de usuario

HP ProLiant XL450 Gen10 Manual

HP ProLiant s6500 Manual de referencia

HP BL685c - ProLiant - 4 GB RAM Instrucciones de uso

HP ProLiant DL580 Generation 5 (G5) Instrucciones de uso

HP ProLiant SL390s G7 2U Manual

HP 9000 rp4440 Manual de instalación y operación

HP 850 Unified Wired-WLAN Appliance Manual de usuario

HP T5530 - Compaq Thin Client Instrucciones de uso

HP Cisco MDS 8/12c Manual de instrucciones

HP ProLiant DL380 Generation9 Guía de instalación

HP ProLiant BL490c Manual de usuario

HP DL360 - ProLiant - Photon Manual

HP ConvergedSystem 300 Manual de usuario

Manuales populares de Servidor de otras marcas

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

Milestone

Milestone Husky IVO 350T Manual de usuario

Planet

Planet NAS-7410 Manual de usuario

Lenovo

Lenovo ThinkSystem SR635 V3 Manual de usuario

Dell

Dell PowerEdge HS5610 Manual