HP Pro Scanner Output Tray Manual de usuario
HP Pro Scanner Output Tray
User Guide
Edition 2
© Copyright 2017 HP Development Company,
L.P.
Legal notices
The information contained herein is subject to
change without notice.
The only warranties for HP products and
services are set forth in the express warranty
statements accompanying such products and
services. Nothing herein should be construed as
constituting an additional warranty. HP shall not
be liable for technical or editorial errors or
omissions contained herein.
Table of contents
1 Introduction ............................................................................................................................................................................................... 1
Required space .......................................................................................................................................................................... 2
2 Items included in the box ......................................................................................................................................................................... 3
3 Stopper adjustment .................................................................................................................................................................................. 4
4 Tray angle adjustment ............................................................................................................................................................................. 6
Tips for a successful batch scan ............................................................................................................................................. 7
5 Fold the tray for storage .......................................................................................................................................................................... 9
6 HP Limited Warranty Statement .......................................................................................................................................................... 11
A. Extent of HP Limited Warranty ........................................................................................................................................ 11
B. Limitations of warranty .................................................................................................................................................... 13
C. Limitations of liability ........................................................................................................................................................ 13
D. Local law ............................................................................................................................................................................. 13
Regulatory notices ................................................................................................................................................................. 13
ENWW iii
iv ENWW
1 Introduction
This accessory for the HP Pro Scanner is designed to stack sheets of paper of the same size scanned as a batch.
It has been designed for optimal performance with plain and bond papers (75–80 g/m²) with little tendency to
curl.
With these conditions, up to 50 sheets can be stacked if the angle of the tray is correctly set, and the stopper is in
place, as explained in this guide. Capacity for other paper types or sizes may be lower, depending on their density
and weight.
The tray has been designed to support paper sizes from A2 (ANSI C) to A0 (Arch E) in length. The maximum width
is the maximum supported by the scanner, which may be 1067 or 1118 mm (42 or 44 in), depending on the
model.
ENWW 1
Required space
The output tray has approximately the following dimensions: 1150 mm long × 1190 mm wide × 1200 mm high
(45.3 × 46.9 × 47.2 in). You are recommended to allow some extra space at the left and front of the tray for
normal actions while it is in use.
2 Chapter 1 Introduction ENWW
2 Items included in the box
1. Upper tray
2. Paper stoppers (2)
3. Central tray
4. Lower tray
5. Wheels
6. Angle selector touch zone
7. Angle selector
8. Angle knob
9. Height adjusters (2)
10. Main structure
11. Antistatic brushes (SD version only)
12. Safety lock
ENWW 3
3 Stopper adjustment
1. Take a sheet of paper of the size that you intend to scan.
2. Preinstall the stoppers in the central or lower tray area, depending on the paper size.
HP recommends that the edge of the paper should be 5–10 cm outside the edge of the stopper.
3. Put the paper on the tray, ensuring that the trailing edge is above (or at least not below) the upper rod of
the fall tray. See Tips for a successful batch scan on page 7.
4 Chapter 3 Stopper adjustment ENWW
4. Fix the two stoppers in place by rotating the handle, so that the paper stops with its trailing edge in the
indicated position.
5. Remove the sheet of paper.
6. Adjust the angle of the tray if necessary (see Tray angle adjustment on page 6).
7. Start scanning.
ENWW 5
4 Tray angle adjustment
You may be able to improve the sliding and stacking of the originals on the output tray by adjusting its angle of
slope. The ideal angle could vary with paper type, paper size, and ambient conditions.
The objective is to adjust the angle of the tray so that paper can fall freely from the scanner.
1. Hold the tray with your hand in the touch zone.
2. With the other hand, pull out the knob to disengage the lock.
6 Chapter 4 Tray angle adjustment ENWW
Tabla de contenidos
Otros manuales de Accesorios para escáner de HP
Manuales populares de Accesorios para escáner de otras marcas
imacon
imacon Flextight Damaged Original Kit Manual de usuario
ARS-Imago
ARS-Imago POLAROID SCAN MASK Manual de usuario
Epson
Epson B813112 Manual de funcionamiento
Datalogic
Datalogic GFC-2 00 Series Manual de usuario
Colortrac
Colortrac MK4 UNIVERSAL REPRO STAND Manual de usuario
Epson
Epson 1640XL - Expression Graphic Arts Manual de usuario
