HP TFT7600 Manual de usuario
HP TFT7600 G2 Rackmount Keyboard Monitor
KVM Console
User Guide
Part Number 615930-001
June 2010 (First Edition)
© Copyright 2010 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the
express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional
warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
ENERGY STAR and ENERGY STAR mark are registered U.S. trademarks.
Intended audience
This document is for the person who installs racks and rack products. This procedure is performed only by trained personnel. HP assumes you are
qualified in performing installations and trained in recognizing hazards in rack products.
Contents
Introduction.................................................................................................................................. 5
HP TFT7600 KVM Console features ...............................................................................................................5
ENERGY STAR compliant....................................................................................................................6
Main components.........................................................................................................................................6
Rear components .........................................................................................................................................7
Installation ................................................................................................................................... 8
Kit contents..................................................................................................................................................8
Installing the HP TFT7600 G2 Rackmount Keyboard Monitor KVM Console .......................................................8
Connecting and routing cables....................................................................................................................12
Accessing the HP TFT7600 KVM Console.....................................................................................................13
Removing the HP TFT7600 KVM Console .....................................................................................................14
Removing the HP 1U Adjustable Toolless Rails...............................................................................................14
Removing PS2 cables with cable-locking mechanism......................................................................................14
Enabling the native display resolution of 1440x900 in HP-UX ........................................................................15
Operational overview ................................................................................................................. 16
On-screen display ......................................................................................................................................16
Launching OSD menu.................................................................................................................................16
Navigating OSD........................................................................................................................................16
OSD menu ................................................................................................................................................17
Brightness/Contrast..........................................................................................................................17
Image control ..................................................................................................................................17
Advanced .......................................................................................................................................18
Auto Configuration...........................................................................................................................19
Factory settings ................................................................................................................................19
Language........................................................................................................................................19
Information......................................................................................................................................
19
Maintenance.............................................................................................................................. 20
Maintenance guidelines..............................................................................................................................20
Cleaning the monitor........................................................................................................................20
Shipping instructions...................................................................................................................................21
Moving a rack with the HP TFT7600 KVM Console installed...........................................................................21
Specifications............................................................................................................................. 22
HP TFT7600 KVM Console specifications .....................................................................................................22
Environmental requirements...............................................................................................................22
Regulatory compliance notices ..................................................................................................... 23
Regulatory compliance identification numbers ...............................................................................................23
Federal Communications Commission notice.................................................................................................23
FCC rating label ..............................................................................................................................23
Class A equipment ...........................................................................................................................23
Class B equipment............................................................................................................................23
Declaration of conformity for products marked with the FCC logo, United States only..............................24
Modifications...................................................................................................................................24
Cables............................................................................................................................................24
Canadian notice (Avis Canadien)................................................................................................................24
European Union regulatory notice................................................................................................................25
Japanese notice .........................................................................................................................................26
BSMI notice...............................................................................................................................................26
Korean notice ............................................................................................................................................26
Chinese notice...........................................................................................................................................27
China energy regulations............................................................................................................................27
Disposal of waste equipment by users in private households in the European Union..........................................27
Power cord requirement..............................................................................................................................27
Power cord statement for Japan...................................................................................................................28
Electrostatic discharge................................................................................................................. 29
Preventing electrostatic discharge ................................................................................................................29
Grounding methods to prevent electrostatic discharge....................................................................................29
Technical support........................................................................................................................ 30
HP contact information................................................................................................................................30
Acronyms and abbreviations........................................................................................................ 31
Index......................................................................................................................................... 32
Introduction 5
Introduction
HP TFT7600 KVM Console features
The HP TFT7600 KVM Console is a rack-mountable 1U integrated flat-panel monitor and keyboard with
touchpad.
NOTE: 1U = 1.75 inches or 44.45 cm
The HP TFT7600 KVM Console is mounted on rails with space available to add a 1U KVM switch box
behind the unit. The console can be used with all HP racks.
The HP TFT7600 KVM Console uses a 43.9-cm (17.3-inch) color-active matrix TFT LCD ("Main
components" on page 6).
Feature Description
Display 43.9-cm (17.3-inch) viewable area display
Resolution 640 x 480 (VGA) through 1280 x 1024 (SXGA), 1440 x 900
(WXGA+), and 1600 x 900 (WXGA+)
Monitor
input Plugs into a standard VGA connector; does not require a special
graphics adapter card
Plug and
Play
Plug-and-Play capability if supported by your system
OSD Available in seven languages:
•
English
•
French
•
German
•
Italian
•
Japanese
•
Simple Chinese
•
Spanish
Keyboard
with
touchpad
Three-button touchpad with scroll bar
Power supply 12v DC/36 Watt
Scroll keys Four scroll keys (inverted T)
Introduction 6
ENERGY STAR compliant
The HP TFT7600 KVM Console is ENERGY STAR® qualified.
For more information about the ENERGY STAR® qualifications, see the HP website
(http://www.hp.com/hpinfo/globalcitizenship/environment/products/ecolabels.html).
Main components
Callout Component Function
1 Display release latch Pushes down to unlatch the display
assembly
2 Blue LED
•
Turns on when the display is closed
•
Helps identify the HP TFT7600 KVM
Console in a rack
3 OSD activation button
•
Launches OSD menus
•
Selects
•
Exits menus and OSD
4 OSD scroll up and
down button Used to scroll in the OSD menu and adjust
functions
5 Scroll lock LED Lights when Scroll lock is on
6 Cap lock LED Lights when Cap lock is on
7 Number lock LED Lights when Number lock is on
Introduction 7
Callout Component Function
8 USB connection Pass-through to the rear USB port
9 Scroll bar Used to scroll on the monitor
10 Right pick button Used to select the option on the right
11 Middle pick button Used to select the option in the middle
12 Left pick button Used to select the option on the left
13 Touchpad Used to move the mouse on the monitor
Rear components
Callout Component
1 USB pass-through
2 USB keyboard and mouse port
3 PS2 keyboard port
4 PS2 mouse port
5 VGA input port
6 Power connection port
7 Serial firmware port
Installation 8
Installation
Kit contents
Item Quantity
HP TFT7600 KVM Console 1
M6 screws 4
6-32 screws 5
HP Adjustable Toolless Rails 2
Cable management arm, power adapter with brace rail 1
Lock plates 2
USB cables 2
PS2 cables 2
Video cable 1
Power cords 2
USB cable labels 2
This kit might contain extra hardware.
Installing the HP TFT7600 G2 Rackmount Keyboard
Monitor KVM Console
1. Align the HP 1U Adjustable Toolless Rails with the holes marked on the rack, and snap them into
place.
a. Snap one end of the HP 1U Adjustable Toolless Rails into the retna rails.
b. Extend the other half of the HP 1U Adjustable Toolless Rails to meet the appropriate rack depth,
and snap them into place.
NOTE: If the HP 1U Adjustable Toolless Rails do not snap into place, be sure that they align
with the holes marked on the rack. The holes marked on the rack must be in the same location
for the front and rear of the rack.
Installation 9
2. Extend the inner slides until they lock into place.
3. Align the unit with the extended inner slides, and then insert the unit into the rack.
Installation 10
4. From the rear of the rack, slide the brace rail assembly in between the HP 1U Adjustable Toolless
Rails.
5. Align the screw holes on the brace rail with the screw holes on the HP 1U Adjustable Toolless Rails.
6. Using two 6-32 screws, secure the brace rail to the HP 1U Adjustable Toolless Rails.
Otros manuales para TFT7600
2
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Manuales populares de Cajón de LCD de otras marcas
Acnodes
Acnodes KD 8228 Manual de usuario
Ameriwood
Ameriwood 9524328PCOM Manual de usuario
Kesseböhmer
Kesseböhmer TANDEM solo Manual de usuario
Crystal Image Technologies
Crystal Image Technologies RMD-151-A Series Manual de usuario
APW Wyott
APW Wyott Ease Extreme HDX-1-120 Manual de usuario
NTI
NTI RACKMUX-V17-N Manual de usuario
GRASS
GRASS DWD XP Manual de usuario
StarTech.com
StarTech.com DuraView RACKCONS1701 Manual de usuario
Fisher & Paykel
Fisher & Paykel IZONA CoolDrawer RB36S Manual de usuario
Synergy Global Technology
Synergy Global Technology LCD1U17-44 Manual de usuario
Fujitsu
Fujitsu RC25 Manual de usuario
Acnodes
Acnodes RK 1000B Manual de usuario