Howard Miller 615010 Manual de usuario

4- SHORT

SCREWS

HOWARD MILLER

MODEL 615010

ASSEMBLY INSTRUCTIONS

PARTS LIST:

8- LONG

SCREWS 1- CLOCK DIAL

ASSEMBLY

1- LARGE BASE RING

1- SMALL BASE RING

7. Hook the large curl of the third leg

around the small base ring.

4. Using the same procedure as in

steps 2 and 3, attach the second

leg, adjacent to the first leg.

5. Place the large base ring over the

outside of the legs, inside of the

small curls of the legs.

LARGE BASE RING

6. Place the small base ring inside of

the large curls of the two legs.

SMALL BASE RING

8. Lift the large base ring and slide

the small curl of the leg under the

ring.

9. Using a short screw attach the

third leg to the clock dial assembly.

1. Place the clock dial assembly

upside down on a soft clean

surface.

3. Using a short screw attach the leg

to the clock dial assembly.

2. Align the hole in the top (small curl

end) of of the legs with one of

the four holes in the outside ring of

the clock dial assembly.

one

ALIGN

HOLES

4- RUBBER

PADS

1- GLASS TOP

(NOT SHOWN)

4- LEGS

NOTE: Do not completely tighten screws until all parts have been assembled, step 13.

Do not push or lean on the back of the dial when assembling.

13.Tighten all 12 screws used to

attach the legs, clock dial

assembly, and base rings.

15.Place the glass top on the rubber

pads, centered on the base.

10.Use the same procedure in steps

7, 8, and 9 to attach the fourth leg.

11.Align the holes in large base ring

with the holes in the legs. Using

the long screws attach the ring to

the legs.

12.Align the holes in small base ring

with the holes in the legs. Using

the long screws attach the ring to

the legs.

Note: The holes in the ring may not align perfectly with the holes in the legs and you

may need to apply moderate force to the ring or leg in order to start the screws.

PD10063-R2

10/10

14.Turn the assembled base over so

that the dial is facing up. Attach

the rubber pads over the screw

holes in the outer ring of the base.

RUBBER PAD

Otros manuales de Reloj de Howard Miller

Howard Miller

Howard Miller 61123 Manual de usuario

Howard Miller

Howard Miller 615114 Manual de instalación

Howard Miller

Howard Miller Seville Manual de usuario

Howard Miller

Howard Miller WALL AND MANTEL CLOCK Manual de usuario

Howard Miller

Howard Miller 611274 Manual de instalación

Howard Miller

Howard Miller 611319 Manual de instalación

Howard Miller

Howard Miller 615116 Manual de instalación

Howard Miller

Howard Miller 615-069 Manual de usuario

Howard Miller

Howard Miller BEDFORD PARK Manual de instalación

Howard Miller

Howard Miller LEWISBURG Manual de usuario

Howard Miller

Howard Miller MYDay 625-488 Manual de usuario

Howard Miller

Howard Miller 615088 Manual de instalación

Howard Miller

Howard Miller 615-052 Manual de usuario

Howard Miller

Howard Miller 615096 Manual de instalación

Howard Miller

Howard Miller 615100 Manual de instalación

Manuales populares de Reloj de otras marcas

Silicon Laboratories

Silicon Laboratories SI5324 Manual de usuario

Heathkit

Heathkit GC-1005 Manual de usuario

Oregon Scientific

Oregon Scientific PRYSMA RMR221P Manual de usuario

Andrew O'Malley

Andrew O'Malley DOTKLOK Manual de usuario

ALGE-Timing

ALGE-Timing ASC3 Manual de usuario

Bodet

Bodet Profil 960 Manual de usuario

Nixie Clock

Nixie Clock Divergence Meter Manual de usuario

La Crosse Technology

La Crosse Technology WS-8256-AL Manual de usuario

Mini Gadgets

Mini Gadgets MCPro Manual de usuario

Casio

Casio TMR-200 Manual de usuario

Progetti

Progetti ILTEMPOSTRINGE Manual

BVItech

BVItech BV-101 Manual de usuario

Progetti

Progetti KALIMERO Manual

La Crosse Technology

La Crosse Technology WT-3141b Manual

La Crosse Technology

La Crosse Technology W86531 Manual de usuario

Sharp

Sharp SPC900 Manual de usuario

La Crosse Technology

La Crosse Technology 404-50447 Manual de usuario

Datexx

Datexx DF0063 Manual de usuario