Short press key once，The corresponding symbol “ ” appears
in the display. Aim at the upper point (1) and trigger the measurement.
After the first measurement the value is adopted. Keep the instrument as
horizontal as possible. Aim at the point (2) and trigger the measurement,
the partial results in Intermediate line 1 and line 2, and the result (the red line)
will be displayed in the main.
2、Indirect Measurement - determining a distance using 3 Measurements
Indirect measurement 2
Press this button twice; the display shows the following symbol .
The laser is switched on.Aim at the upper point (1) and trigger the
measurement; Aim at the upper point (2) and trigger the measurement.
After the second measurement the value is adopted. Keep the instrument as
horizontal as possible. Aim at the point (3) and trigger the measurement,
the partial results in Intermediate line 1 ~ line 3, and the result (the red line)
will be displayed in the main.
3、Indirect measurement - determining a distance using 3 auxilliary
measurements
Indirect measurement 3
Short press key thrice ，The corresponding symbol “ ”
appears in the display. Aim at the upper point (1) and trigger the
measurement; Aim at the upper point (2) and trigger the measurement.
After the second measurement the value is adopted. Keep the instrument as
horizontal as possible. Aim at the point (3) and trigger the measurement,
the partial results in Intermediate line 1 ~ line 3, and the result (the red line)
will be displayed in the main.
