Hoover HDIN S Series Manual de usuario

Thank you for choosing a Hoover dish

washer. We are confident it will assist you

loyally in washing your daily dishes in full

safety.

Carefully read this manual for correct and

safe appliance use and for helpful tips on

efficient maintenance.

Only use the dish washer

after

carefully reading these instructions. We

recommend you always keep this manual

to hand and in good condition for any

future owner.

Please check that the appliance is

delivered with this instruction manual, the

warranty certificate, the service centre

address and the energy efficiency label.

Each product is identified by a unique 16-

digit code, also called the “serial number”,

printed on the warranty

certificate or on

the serial plate found inside the door, on

the upper right hand side. This code is a

sort of product-specific ID card that you

will need to use to register the product or

if you need to contact the Technical

Assistance Centre.

Fig. A

1. GENERAL SAFETY RULES

2. WATER CONNECTION

3. LOADING THE SALT

4. ADJUSTING THE UPPER BASKET

(ONLY ON SOME MODELS)

5. LOADING DISHES

6. INFORMATION FOR TEST

LABORATORIES

7. LOADING THE DETERGENT

8. TYPES OF DETERGENT

9. LOADING THE RINSE AID

10.

CLEANING THE FILTERS

11.

PRACTICAL HINTS

12.

CLEANING AND MAINTENANCE

13.

DESCRIPTION OF THE CONTROL PANEL

14.

TECHNICAL DATA

15.

PROGRAMME SELECTION AND SPECIAL

FEATURES

16.

REMOTE CONTROL (Wi-Fi)

17.

PROGRAMME LEGEND

18.

WATER SOFTENER UNIT

19.

TROUBLESHOOTING AND WARRANTY

20.

ENVIRONMENTAL CONDITIONS

WIRELESS PARAMETERS (PAG.40)

Contents

1. GENERAL SAFETY

RULES

This appliance is intended to

be used in household and

similar applications such as:

−Staff kitchen areas in

shops, offices and other

working environments;

−Farm houses;

−By clients in hotels, motels

and other residential type

environments;

−Bed and breakfast type

environments.

A different use of this appliance

from household environment

or from typical housekeeping

functions, as commercial use by

expert or trained users, is excluded

even in the above applications. If

the appliance is used in a manner

inconsistent with this it may reduce

the life of the appliance and may

void the manufacturer’s warranty.

Any damage to the appliance or

other damage or loss arising

through use that is not consistent

with domestic or household use

(even if located in a domestic or

household environment) shall not

be accepted by the manufacturer to

the fullest extent permitted by law.

!This appliance can be used by

children aged from 8 years and

above and persons with reduced

physical, sensory or mental

capabilities or lack of experience

and knowledge if they have been

given supervision or instruction

concerning use of the appliance

in a safe way and understand the

hazards involved. Children shall

not play with the appliance.

Cleaning and user maintenance

shall not be made by children

without supervision.

!Children should be supervised

to ensure that they do not play

with the appliance.

!Children of aged 3 and under

should be kept away unless

continuously supervised.

!If the supply cord is damaged,

it must be replaced by the

manufacturer, its service agent

or similarly qualified persons in

order to avoid a hazard. We

recommend using an original

component, which can be

requested from the Technical

Assistance Centre.

Only use the hose-sets

supplied with the appliance for

the water supply connection

(do not reuse old hose-sets).

Water pressure must be

between 0.05 MPa and 0.8

MPa.

Make sure carpets or rugs do

not obstruct the base or any of

the ventilation openings.

!After installation, the appliance

must be positioned so that the

plug is accessible.

Do not leave the door open in

a horizontal position, in order

to avoid potential dangers (e.g.

tripping).

!For further information on the

product or to consult the technical

data sheet, please refer to the

manufacturer's website.

The technical details (supply

voltage and power input) are

indicated on the product rating

plate.

Make sure that the electrical

system is earthed and complies

with all applicable laws, and

that the socket is compatible

with the plug of the appliance.

The manufacturer declines all

responsibility for any damage

to people or property due to

non-earthing of the machine.

!Ensure that the dishwasher

does not crush power cables.

!In general it is not advisable to

use adaptors, multiple plugs

and/or extension cables.

!Before cleaning or maintaining

the dishwasher, unplug the

appliance and turn off the

water supply.

!Do not pull on the power cord

or appliance to unplug the

machine.

!Do not leave the appliance

exposed to the elements (rain,

sun, etc.).

!Leaning or sitting on the open

door of the dishwasher could

cause it to tip over.

The dishwasher is designed for

normal kitchen utensils. Objects

that have been contamined by

petrol, paint, traces of steel or

iron, corrosive chemicals, acids

or alkalis must not be washed in

the dishwasher.

WARNING:

Knives and other utensils

with sharp points must be

loaded in the basket with

their points down or placed

in a horizontal position.

Electrical connections and

safety instructions

If there is a water softening

device installed in the home

there is no need to add salt to

the water softener fitted in the

dishwasher.

If the appliance breaks down or

stops working properly, switch it

off, turn off the water supply and

do not tamper with it. Repair work

should only be carried out by an

approved service agent and only

genuine spare parts should be

fitted. Any failure to follow the

above advice may have serious

consequences for the safety of

the appliance.

!If it you need to move the

machine after removing the

packaging, do not try to lift it by

the bottom of the door. Open

the door slightly and lift the

machine by holding on the top.

By marking this product,

we confirm, under our own

responsibility, full compliance

of this product with all

relevant safety, health and

environmental requirements

under European legislation.

Remove all elements of the

packaging.

!Do not install or use the

dishwasher if it is damaged.

Follow the instructions supplied

with the product.

Installation

WARNING:

Keep packaging materials

away from children.

2. WATER CONNECTION

!The inlet and drain hoses can be directed

to left or right.

Water pressure must be between 0,08

MPa and 0,8 MPa.

The inlet hose must be connected to a tap

so that the water supply can be cut off

when the machine is not in use (fig. 1 B).

!The dishwasher is fitted with 3/4" threaded

connector (fig. 2).

!Connect inlet hose "A" to water tap "B"

with a 3/4" attachment making sure that it

has been properly tightened.

!If it is necessary, the inlet pipe can be

lengthened up to 2,5 m. The extension

pipe is available from the After Sales

Service Centre.

!If the dishwasher is connected to new pipes

or to pipes which have not been inuse for a

long time run water through for a few

minutes before connecting the inlet hose. In

this way no deposits of sand or rust will

clog up the water inflow filter.

The appliance must be connected to

the water mains using new hose-sets.

The old hose-sets should not be

reused.

The dishwasher can be connected to

either cold or hot water, as long as it

is no hotter than 60°C.

SOME MODELS may include one or more

of the following features:

!WATERBLOCK (fig. 3)

The waterblock system has been designed

improve the safety of your appliance. The

system prevents flooding which might be

caused by a machine malfunction or as a

result of a fracture on the rubber pipes

and in particular on the water supply pipe.

How it works

A sump located on the base of the appliance

collects any possible water leakage and

operates a sensor which activates a valve

placed under the water tap and blocks any

water, even with the tap fully opened.

If box "A" containing the electrical parts is

damaged, remove the plug from the socket

immediately. To ensure perfect operation of

the safety system, the hose with box "A"

should be connected to the tap as shown in

the figure. The water supply hose should

not be cut, as it contains live parts. If the

hose is not long enough for correct

connection, it must be replaced with a longer

one. The hose can be obtained from the

Technical Assistance Centre.

!AQUASTOP (fig. 4):

A device located on the supply tube that

stops water flow if the tube deteriorates;

in this case, a red mark will appear in the

window "A" and the tube must be

replaced. To unscrew the nut, press the

one-way lock device "B".

AQUAPROTECT - SUPPLY TUBE WITH

GUARD

(fig. 5):

Should water leak from the primary internal

tube "A", the transparent containment

sheath "B" will contain water to permit

the washing cycle to complete. At the

end of the cycle, contact the Customer

Service Centre to replace the supply

tube.

Hydraulic safety devices

All the dishwashers are equipped with

an overflow safety device which, if

water exceeds normal levels due to

malfunctions, automatically blocks

water flow and/or drains excess

quantities.

!The outlet hose should disharge into a

standpipe, making sure that there are no

kinks (fig. 6).

!The standpipe must be at least 40 cm

above floor level and it must have an

internal diameter of at least 4 cm.

!It is advisable to fit an anti-odour air trap

(fig. 6X). If necessary the outlet hose can

be extended up to 2,5 m, provided that it

is kept at a maximum height of 85 cm

above floor level. The extension pipe is

available from the After Sales Service

Centre.

!The hose can be hooked over the side of

the sink, but it must not be immersed in

water, in order to prevent water from

being syphoned back to the machine

when this is in operation (fig. 6Y).

!When installing the appliance under a

worktop the hose pipe clamp must be

attached to the wall in the highest

possible position under the worktop

(fig. 6Z).

!Check that there are no kinks in the inlet

and outlet hoses.

Connecting the outlet hose

3. LOADING THE SALT

(Fig. A "1")

!The appearance of white stains on dishes

is generally a warning sign that the salt

container needs filling.

!On the bottom of the machine there is a

container for the salt for regenerating the

softener.

!It is important to use only a salt that is

specifically designed for dishwasher.

Other types of salt contain small

quantities of insoluble particles which

over a long period of time may affect and

deteriorate the softener performance.

!To add salt, unscrew the cap of the

container on the bottom and then refill the

container.

!During this operation a little water will

overflow; but keep adding salt until the

container is full. When the container is

full, clean the thread of salt residue and

retighten the tap.

!After loading the salt, it is recommended

running a complete washing cycle, or

COLD RINSE programme.

!The salt dispenser has a capacity of

between 1.5 and 1.8 kg and, for efficient

use of the appliance, it should be refilled

from time to time .

After loading the salt, YOU MUST run

a complete washing cycle, or the

PRE-WASH/COLD RINSE/REFRESH

programme.

(Only for first start up) When the

appliance is used for the first time,

after completely filling the salt

container, it is necessary to add water

until the container overflows.

4. ADJUSTING THE UPPER

BASKET (ONLY ON SOME

MODELS)

If 29 cm to 32.5 cm plates are regularly

used, load them onto the lower basket

after the upper basket has been placed in

its upper position, as detailed below

(according to the model):

Type "A":

1. Turn front blocks "A" outwards;

2. Remove the basket and remount it in

the upper position;

3. Replace blocks "A" in the original

position.

Dishes that are greater than 20 cm in

diameter can no longer be loaded onto the

upper basket, and the mobile supports

cannot be used when the basket is in the

upper position.

Type "A"

Type "B":

(ONLY MODELS WITH EASY CLICK):

1. Remove the upper basket;

2. Hold the basket on both sides and lift it

upwards (fig. 1).

Dishes that are greater than 20 cm* in

diameter can no longer be loaded onto the

upper basket, and the mobile supports

cannot be used when the basket is in the

upper position.

*In models fitted with a third basket, dishes

measuring more than 14 cm in diameter

can no longer be loaded onto the upper basket.

ADJUSTING THE BASKET TO THE

LOWER POSITION:

1. Hold the basket on both sides and lift it

gently upwards (fig. 1);

2. Then slowly release into the correct

position (fig. 2).

N.B.: NEVER LIFT OR LOWER THE

BASKET FROM ONE SIDE ONLY (fig. 3).

WARNING:

We recommend adjusting the basket before

loading the dishes.

Type "B"

Tabla de contenidos

Otros manuales de Lavavajillas de Hoover

Hoover

Hoover DYM 763 Manual de usuario

Hoover

Hoover HND 7515 Manual de usuario

Hoover

Hoover HND 925 Manual de usuario

Hoover

Hoover HDIH 2T1045 Manual de usuario

Hoover

Hoover AXI HDPN 4S603PX Manual de usuario

Hoover

Hoover H-DISH 700 Manual de usuario

Hoover

Hoover DDY062 80 Manual de usuario

Hoover

Hoover 32000298 Manual de usuario

Hoover

Hoover HDP 2D945W-86 Manual de usuario

Hoover

Hoover HV-D13SS Manual de usuario

Hoover

Hoover DDY 088TX Manual de usuario

Hoover

Hoover H-DISH 500 HF 5C7F0X-80 Manual de usuario

Hoover

Hoover DDY 65543FAM Manual de usuario

Hoover

Hoover HOD 6615 BL Instrucciones de instalación

Hoover

Hoover HFI55-80 Manual de usuario

Hoover

Hoover DDY 062 L Guía de inicio rápido

Hoover

Hoover Vision One HOD 7715 Manual de usuario

Hoover

Hoover Nextra INTER@CT 3D HND 915 Manual de usuario

Hoover

Hoover HDPN 2D520PW Manual de usuario

Hoover

Hoover HLSI 550GT Manual de usuario

Hoover

Hoover D824/1 Manual de usuario

Hoover

Hoover HD 312 Manual de usuario

Hoover

Hoover HDPH 2D945W-86 Manual de usuario

Hoover

Hoover HV-D6FI Manual de usuario

Manuales populares de Lavavajillas de otras marcas

Electrolux

Electrolux ESI5211LOX Manual de usuario

KitchenAid

KitchenAid KUDB230B Manual de usuario

Brandt

Brandt BDJ424DB Manual de usuario

Asko

Asko DSD767UXXL.AU Manual de usuario

Beko

Beko DFN26210W Manual de usuario

NEFF

NEFF S153ITX00E Hoja de especificaciones

Midea

Midea SV 4.45 wi Manual de usuario

LG LDF7932 Manual de usuario

Gorenje

Gorenje GV63214 Manual de usuario

Hotpoint

Hotpoint HDA1100ZWH Manual de servicio

Blomberg

Blomberg LDFN2240W Manual de usuario

AEG

AEG FFB83836PM Manual de usuario

Cylinda

Cylinda DM3220RFD Manual de usuario

Atag

Atag DW8214MB Manual de usuario

GE GLD8000 Series Manual de usuario

Siemens

Siemens SN23HI02KE Hoja de especificaciones

Omega

Omega ODW717X Manual de usuario

BORETTI

BORETTI BVW-683 Manual de usuario