honor VFJ-520 Manual de usuario
VFJ-520 Full Automatic Vertical Packing Machine
Manual
Content
1. Preface ----------------------------------------------------------------------- 1
2. Safety Notice ---------------------------------------------------------------- 2
2.1Safety Notice and Marks -------------------------------------------------- 2
2.2Working environment ------------------------------------------------------ 2
2.3Attentions -------------------------------------------------------------------- 3
3. Technical Parameters ------------------------------------------------------- 3
3.1Packing machine technical Parameters ---------------------------------- 3
3.2Optional accessories match with the machine -------------------------- 4
4. Machine installation -------------------------------------------------------- 4
4.1 Structure of the machine -------------------------------------------------- 4
4.2 Before turn on the Machine ---------------------------------------------- 6
4.3 Install roll film ------------------------------------------------------------- 7
4.4 Film install drawing ------------------------------------------------------- 8
4.5 Adjustment of vertical sealing ------------------------------------------- 8
4.6 Color code sensor detecting and adjusting ---------------------------- 9
5. Operation interface introduction ----------------------------------------- 10
5.1 Starting --------------------------------------------------------------------- 11
5.2 Main menu ----------------------------------------------------------------- 11
5.3 Automatic ------------------------------------------------------------------ 12
5.4 Manual page --------------------------------------------------------------- 13
5.5 Function page ------------------------------------------------------------- 15
5.6 Parameter setting --------------------------------------------------------- 15
5.7 Alarm ----------------------------------------------------------------------- 18
6. Troubleshooting ------------------------------------------------------------ 20
7. Maintaining ----------------------------------------------------------------- 22
7.1 Wearing part replacement ----------------------------------------------- 22
7.2 Maintaining --------------------------------------------------------------- 22
8. Electric diagram ----------------------------------------------------------- 22
8.1 IO point diagram --------------------------------------------------------- 22
8.2 Main electric circuit diagram ------------------------------------------- 25
8.3 Electromagnet circuit valve diagram ---------------------------------- 26
8.4 Weigher and cup device circuit diagram ------------------------------ 27
8.5 Auger device circuit diagram ------------------------------------------- 28
9. Pneumatic diagram -------------------------------------------------------- 29
10. Listing of spare parts with the machine ------------------------------- 30
11. Attachments --------------------------------------------------------------- 31
11.1 Code printer manual ---------------------------------------------------- 31
-1-
1. Preface
Thanks for Choosing VFJ-520 vertical packing machinery. Please read this
instruction thoroughly in order to get a better understanding of operation and
maintenance. We also provide professional after-sale service in case you need.
The sell point of our VFJ-520 is easy operation, high efficiency, safety and stability.
Some of the functions are different from the counting and filling device so this
instruction only describes basic functions.
VFJ-520 is auto feeding, counting, forming bags, filling sealing, printing and
carrying away.
If any problem occurs, please read the book to find a solution or contact with our
after-sale service to better solve the problem.
Every single part of the electricity had been checked but if you have any trouble
installing the machine, please contact us.
Operating according to the instruction will make it easier during the production and
avoid unpredictable situation.
Operate in safe production environment.
Contact information of HONOR PACK.
CHINA.ZHEJIANG
WENZHOU HONOR PACKAGING MACHINERY CO., LTD
4th Floor, Block H, Wisdom Vally, Station Ave.
Wenzhou, Zhejiang, China
Wing huang Phone:+86 13676772213
Fax:86-577-5669-2637
E-mail：marketing@honorpack.com
Wed:www.honorpack.com
-2-
2. Safety Notice
2.1 Safety Notice and Marks
On the left side of this instruction, there are marks.
Please remember the following marks and their meanings.
For a safe using environment, every person using this machine must know the
marks meaning.
Dangerous
Dangerous marks stand for the working part may cause hurting and harming to
people.
Warning
Warning marks stand for may cause damage to machine, people and need to operate
to the instruction.
Notice
Notice marks stand for preventing unpredictable damage or problem to the machine
or people when doing something to the target part.
工作时请勿接近！
Work please keep out！
Watch out
Watch out marks Stands for non-operator should keep a distance form the working
machine.
2.2 Working environment
1). Temperature:0-40℃, humidity:35-85%
-3-
2). Power and voltage: AC 200V ~ 240V 50/60Hz
3). Installation requirement:
4). Frame of the equipment should safe and reliable
5). Frame should connect to ground electrode
6). Stay away from severe interference
7). Don’t apply in corrosive environment.
2.3 Attentions
1). Read instruction and set the correct parameters at first running.
2). Connect the machine to ground electrode
3). Clean and withdraw all the products in side the machine before each running.
4). Sterilize contacting part of food and roll film everyday.
5). Cut off pneumatic and electric supply before maintenance or cleaning.
6). Fix must be done by profession engineer while electric and pneumatic parts
break down.
7). No touching to the mechanical part and electric parts while machine was
running.
8). Do not use shape object to touch the screen.
9). Machine cannot place at explosive environment.
3. Technical Parameters
3.1 Packing machine technical Parameters
Total power
2.2KW
Packing product
puff food, cookies, beens, peanuts, nuts and etc; powder, flour and etc
Packing material
OPP/CPP、CPP/PE
MST/PE、PET/PE
Horizontal sealing
heating element
power(total)
800W/AC 220V
Thickness of the
packing film
0.05—0.08mm
vertical heating pipe
power
500W/AC 220V
Max roll film width
420mm
Measuring range of
the bag
10—1200ml
Max bag size
200mm(W)x300mm(L)
Air pressure
required
0.65Mpa
Packing speed
5—60bags/min
Air consumption
0.3m3/min
-4-
Note: Packing material should choose roll film which roll film width≤420mm,
and the roll film inner Φ75mm, thickness of the film is 0.05-0.08mm, the surface
of the film should be smooth, no pattern and words should be printed at the
10mm form the edge of the film, the eye mark color should be obvious telled
from the background.
3.2 Optional accessories match with the machine
4. Machine installation
4.1 Structure of the machine
Total weight
540Kg
Dimension
1080(L)*1300(W)*
1400(H)mm
Name
Function
14 heads combine
weigher
Matching with packing machine to reach high speed and
accuracy
10 heads combine
weigher
Matching with packing machine to reach high accuracy
Vibrating hopper
Vibrate feeding
Z shape elevator
Automatic feeding to the weigher
Single hopper elevator
Automatic feeding to the volumatic cup device
Bucket feeder
Manual droping block or fragil product to hopper to reach
one dump one pack
Finished product
elevator
Finished product carry away machine
Round rotating table
Round rotating table for easy picking.
Auger elevator
Matching with auger filler to elevate powder and flour
product
Vacuum elevator
Elevating material in a good environment.
Auger filler
Measuring powder and flour product
Big four head weigher
Suitable for big bulk prodcut measuring and filling
Weight detecting
machine
Selecting finished product which can not reach the target
weight
-5-
Pic.4-1 front side
1
operating system
2
Emergency stop
3
Temperature controller
4
Power switch
-6-
Pic.4-2 whole machine structure
4.2 Before turn on the Machine
1). Choose suitable leakage protection switch
2). If the material elevator works separately, pls choose leakage protection switch
1
Horizontal sealing cylinder
2
Roll film stablize Inflatable shaft
3
Roll film reducer motor
4
Date adjusting rod
5
Carry film motor
6
Vertical sealing position adjust wheel
7
Angle adjusting pole(roll film and collar)
8
Bag former collar
9
Bag former tube
10
Vertical sealing mechanism
11
Carry film belt
12
Horizontal sealing mechanism
13
Finish product buffer board
-7-
according to the power and a PF power.
3). The machine must connect to the ground wire. (there is a mark on the machine
frame)
4). Connect air pipe to pnuematic FRL behind the machine.
5). Install date printing code and ink ribbon
6). Turn on the power and set horizontal and vertical sealing bar and date printer to
temperature needed, double check if the ribbon, roll film and eye mark is install
correctly.
4.3 Install roll film
1). Put the roll film in the Inflatable shaft.
Pic.4-3-1 Film install
2).
Correct the position according to the deviding ruler.
Pic.4-3-2 Adjusting position
3).
Use the gas gun to fill up the Inflatable shaft in order to stablize the roll film.
Pic.4-3-3 Stablize the roll film
Tabla de contenidos
