Honeywell HPTV2416UL Manual técnico

HPTV2416UL

Power Supply

PN 52289:B1 6/5/07 ECN 06-612

Honeywell

12 Clintonville Road

Northford, CT 06472

http://www.honeywellpower.com

Product Installation Document

1Overview

The Honeywell Power Products HPTV2416UL Power supply provides 16 individually fused 24VAC outputs with a total

of 8 amperes.

2 Specifications

• UL/ULC Listed Power Supply

• Sixteen individually fused 24 VAC outputs

• AC Power and 16 Individual Output Indicator LEDs

• LED Indicator Lights:

– Input Power LED (Green) – ON indicates incoming input voltage

– Output Power LEDs (Red) – ON indicates blown output fuse

•Fuses

– Incoming Safety Fuse Blocks (2) 3.15A, 250V

– Load Output Fuses (16), 1A, 250V

– Secondary Fuse, 4A, 250V

• AC cord and spare fuses included

• Power ON/OFF switch

• Dimensions: 9.25 in. x 8.25 in. x 3.5 in. (23.3 cm x 21 cm x 9 cm)

3 Installation Instructions

1. Pre-drill holes where HPTV2416UL enclosure is to be mounted.

If the included AC cord is used, mount the enclosure in a secure location where the unit cannot be accidentally

unplugged.

2. Secure HPTV2416UL enclosure to the desired location (indoor installation only) as shown in Figure 1.

3. Disconnect power to the branch circuit to which the HPTV2416UL will be connected.

4. Place both SW1 switches to the OFF position.

5. Connect incoming AC (120 VAC, 60Hz) into the incoming Fuse block input observing polarities (see Figure 2).

Connect ground leads as shown in diagram.

6. Connect CCTV cameras (or other external loads) to appropriate terminals (example output 1 = 1P, 1N). Route all

24V wiring at least 3/8in. (0.953 cm) from 120V mains wiring (indoor installations only).

7. Power the branch circuit and place SW1 to the ON position. The green LED should illuminate indicating 24V is

reaching the PCB.

NOTE:

– A readily accessible switched circuit breaker must be available to disconnect mains power as required.

– Do not expose to rain or moisture.

– Replace fuses with fuses of same type and rating.

– Refer servicing to qualified personnel.

NOTE: All 120V wiring should be routed so that it cannot touch 24V wiring to be installed later.

Continued on next page...

2HPTV2416UL Installation Instructions — P/N 52289:B1 6/5/07

8. The red LEDs illuminate only if a camera (load) is installed and the fuse is open. Remove a camera output fuse to

verify LED operation.

9. Secure the cabinet cover with metal screws to prevent access by unauthorized personnel.

Figure 1

Figure 2

For additional information:

• Visit our website: http://www.honeywellpower.com

• Contact Technical Support: (877) HPP_POWR

• Email us: hpp_techserv@honeywell.com

Wall

Mounting

Screws

(4)

(typ.)

Cabinet

HPTV2408UL-mount.wmf

HPTV2408UL.wmf

Tabla de contenidos

Otros manuales de Fuente de alimentación de Honeywell

Honeywell

Honeywell VX89301PWRSPLY Manual de usuario

Honeywell

Honeywell HPF24S8 Manual técnico

Honeywell

Honeywell 9000311PWRSPLY Manual de usuario

Honeywell

Honeywell HP300ULX Manual técnico

Honeywell

Honeywell SILENT KNIGHT SK-PS6 Manual de usuario

Honeywell

Honeywell HLSPS25-XPH Manual de usuario

Honeywell

Honeywell Notifier PSU7A Manual de usuario

Honeywell

Honeywell HP400ULACM4CB Manual de usuario

Honeywell

Honeywell Gamewell FCI GFPS-9 Manual de usuario

Honeywell

Honeywell NOTIFIER APS2-6R/E Manual de usuario

Honeywell

Honeywell HPTV24-E Series Manual técnico

Honeywell

Honeywell 900P01 Manual de uso y cuidado

Honeywell

Honeywell PMB-AUX-RTO Manual técnico

Honeywell

Honeywell PS1202A Manual de usuario

Honeywell

Honeywell HP400ULM Manual técnico

Honeywell

Honeywell HPTV2408UL Manual técnico

Honeywell

Honeywell NOTIFIER ALI50EN Manual de usuario

Honeywell

Honeywell PEHA D 942 SPV Manual de usuario

Honeywell

Honeywell Galaxy Power RIO Guía del usuario

Honeywell

Honeywell DCPSU-24 Manual de usuario

Honeywell

Honeywell HPR12DC416UL Manual técnico

Honeywell

Honeywell PS1202C Manual de usuario

Honeywell

Honeywell PS1202A00 Manual de usuario

Honeywell

Honeywell PS-HL-138 BM Series Manual de usuario

Manuales populares de Fuente de alimentación de otras marcas

Monacor

Monacor PS-12CCD Manual de usuario

VOLTIMA

VOLTIMA MagicBox 15 Manual de usuario

Agilent Technologies

Agilent Technologies 6032A Manual de usuario

Miller

Miller Auto Deltaweld 452 Manual de usuario

BCP

BCP PUOUBK Hoja de instrucciones

HC 2210 Manual de usuario

Puls

Puls CT5.241 Manual de usuario

OCZ

OCZ ZX1250W Manual de usuario

iseg

iseg ECH 238 Manual de usuario

Power

Power XXL A Series Manual de usuario

Agilent Technologies

Agilent Technologies 6631B Manual de usuario

Renogy

Renogy PHOENIX 300 Manual de usuario

HP 6200B Manual de servicio

Epson

Epson Stylus Scan 2500 Manual de funcionamiento

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Manual de usuario

Puls

Puls MiniLine ML50.100 Manual de usuario

Puls

Puls AS-Interface SLA4.100 Manual de usuario

Kenwood

Kenwood PS-60 Manual de usuario