Honeywell Dolphin 7800 Manual de usuario
Dolphin™7800
with Android™2.3.4 Mobile Device Platform
Quick Start Guide
78-AND-QS Rev B
10/12
Aller à www.honeywellaidc.com pour le français.
Vai a www.honeywellaidc.com per l'italiano.
Gehe zu www.honeywellaidc.com für Deutsch.
Ir a www.honeywellaidc.com para español.
Para Português, acesse www.honeywellaidc.com.br.
Перейти на русскоязычный сайт www.honeywellaidc.com.
Pro češtinu jdi na www.honeywellaidc.com.
Türkçe için lütfen www.honeywellaidc.com sayfasını ziyaret ediniz.
Pre slovenčinu choď na www.honeywellaidc.com.
Idźna stronę: www.honeywellaidc.com po quick start w języku polskim.
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in specifications
and other information contained in this document without prior notice, and the reader
should in all cases consult HII to determine whether any such changes have been made.
The information in this publication does not represent a commitment on the part of HII.
HII shall not be liable for technical or editorial errors or omissions contained herein; nor
for incidental or consequential damages resulting from the furnishing, performance, or
use of this material.
This document contains proprietary information that is protected by copyright. All rights
are reserved. No part of this document may be photocopied, reproduced, or translated
into another language without the prior written consent of HII.
©2012 Honeywell International Inc. All rights reserved.
Web Address: www.honeywellaidc.com
Out of the Box
Verify that your carton contains the following items:
• Dolphin 7800 mobile computer (terminal)
• 1GB, 2GB, or 4GB industrial grade microSD™ card (pre-installed)
• Main battery pack
• Quick Start Guide
If you ordered accessories for your terminal, verify that they are also included
with the order. Be sure to keep the original packaging in case you need to
return the Dolphin terminal for service.
Memory Card Specifications
Applications on your 7800 Android terminal utilize the microSD card to store
files and application data. To avoid errors or possible data loss, do not
operate the device without a memory card installed.
Honeywell recommends the use of Single Level Cell (SLC) industrial grade
microSD or microSDHC™ memory cards with Dolphin terminals for maximum
performance and durability. Contact a Honeywell sales representative for
additional information on qualified memory card options.
Front Panel
Note: Your Dolphin model may differ from the model illustrated in this guide;
however, the features noted are standard for all 7800 Android models
unless otherwise indicated.
Front Speaker
General
Notification LED
Touch Panel
Display
SCAN Key
Blue Modifier Key
Power Key
or
End Call
Microphone
Red Modifier Key
Navigation Keys
Volume Control
Buttons
Right Scan/
Image Button
I/O Connector
Charge
Indicator LED
Left Scan/
Image Button
Back Key
Home Key
Send Call
MENU Key
Back Panel
Releasing the Hand Strap
Scan/Imaging Engine Window*
Rear Speaker
Camera Flash
Color Camera
Lens
Battery Pack
SIM/Memory Card Socket,
with microSD card
pre-installed
(located under battery)
Stylus Tether/
Lanyard Slot
Battery Release
Button
Battery Lock
Stylus/Stylus Slot
Hand Strap
* LED and Laser Aimer
Aperture
Installing the Battery Pack
Dolphin 7800 model terminals are designed for use with standard battery
pack model 7800-BTSC (Li-ion 3.7 V, 8.9 watt hour) and extended battery
pack models 7800-BTXC and 7800-BTXCW (Li-ion 3.7 V, 14.8 watt hour)
manufactured for Honeywell International Inc.
The Dolphin 7800 is shipped with the battery packaged separately from the
terminal. Perform the steps illustrated below to install the battery.
Ensure all components are dry prior to placing the battery in the
terminal. Mating wet components may cause damage not covered by
the warranty.
Note: The terminal does not power ON unless the battery is locked .
We recommend use of Honeywell Li-ion battery packs. Use of any non-
Honeywell battery may result in damage not covered by the warranty.
Once the battery is installed, connect the terminal to one of the Dolphin 7800
charging peripherals to charge the battery pack.
Dolphin 7800 Android model terminals are designed for use with the following
7800 charging devices and cables: 7800-HB, 7800-CB, 7800-MB, 7800-MC,
and 7800-USB. The 7800 Android model does not support Ethernet.
We recommend use of Honeywell peripherals, power cables, and power
adapters. Use of any non-Honeywell peripherals, cables, or power
adapters may cause damage not covered by the warranty.
!
1
2
3
4
!
!
Charging the Dolphin
Dolphin terminals ship with the battery significantly discharged of power.
Charge the battery with a Dolphin charging device for a minimum of 4 hours
for the standard battery and 6 hours for the extended battery.
Note: Charge the Dolphin terminal for at least 24 hours prior to initial use to
ensure the internal backup battery is fully charged.
Ensure all components are dry prior to mating terminals/batteries with
peripheral devices. Mating wet components may cause damage not
covered by the warranty.
HomeBase (Model 7800-HB)
The 7800-HB charger is designed for use with Dolphin 7800 model terminals,
standard battery pack model 7800-BTSC (Li-ion 3.7V, 8.9 watt hour), and
extended battery pack models 7800-BTXC and 7800-BTXCW (Li-ion 3.7V,
14.8 watt hour) manufactured for Honeywell International Inc. Use only a UL
Listed power supply, which has been qualified by Honeywell with output rated
at 12VDC and 3 amps with the device.
HomeBase Parts
!
AUX Battery Well
AUX Battery
LED COMM
LED
Power/Dock
LED
DC Power
Jack
USB Port
AC Power Cord
Power
Adapter
Power Cable
HomeBase LED Indicators
Charging/Communication Cable (Model 7800-USB)
Use only a UL Listed power supply, which has been qualified by Honeywell
with output rated at 5VDC and 3A with the device.
Red The HomeBase has power but no terminal is docked.
Green The HomeBase has power and the terminal is properly
seated in the base.
Orange The auxiliary battery is charging.
Green The auxiliary battery has completed charging and is
ready for use.
Red
Flashing
The internal temperature of the auxiliary battery is too
hot or there is a battery error. Charge the auxiliary
battery in a cooler environment or replace the battery
with a new Honeywell battery.
Green A USB connection is established with the host
workstation.
COMM Cable
Computer
USB
Power Adapter
Cable
Plug
Adapter
Suspend Mode
Suspend Mode turns the touch screen off and locks the terminal. To save
battery power, the terminal enters Suspend Mode when the device is inactive
for a programmed period of time. To adjust the timeout limit, tap the Apps
Launcher > Settings > Display > Screen Timeout.
1. Press and release the Power key to toggle the terminal in or out of
Suspend Mode.
2. Drag to the right on the touch screen to unlock the terminal.
Note: You should always place the terminal in suspend mode when replacing
the battery pack.
Silent Mode and Airplane Mode
1. Press and hold the Power key for approximately 5 seconds.
2. Tap Silent Mode or Airplane Mode on the Phone Options menu to
toggle the mode ON or OFF.
Note: When Airplane Mode is turned on,
shows on the status bar.
Removing the Battery Pack
1. Press and release the Power key to enter Suspend Mode, then
release the hand strap.
2. Unlock the battery.
3. Wait three seconds, then slide the battery release button away from the
stylus slot.
4. Remove the battery.
Installing the SIM Card and/or Replacing the Memory Card
Note: To prevent possible data corruption, you should unmount the microSD
card before removing the card from the terminal. To unmount the card,
tap the Apps Launcher
> Settings
> Storage > Unmount SD card.
1. Press and release the Power key to enter Suspend Mode.
2. Release the hand strap and remove the battery pack.
3. Remove the screws and the protective shield covering the SIM/memory
card socket.
4. Unlock the SIM card latch by sliding the latch toward the stylus slot.
5. Lift the latch to reveal the SIM socket and the memory card latch.
Note: If a SIM card is installed, remove the card to reveal the memory
card latch.
If you are not replacing the memory card, skip to step 10.
6. Unlock the memory card latch by sliding the latch toward the top of the
terminal.
345
6
7. Lift the latch and remove the memory card.
8. Insert the new microSD or microSDHC card.
Note: To avoid application errors or possible data loss, do not operate the
device without a memory card installed. Contact a Honeywell sales
representative for additional information on qualified memory card
options.
9. Close and lock the memory card latch.
10. Insert the SIM card. Align the chamfered corner of the card with the
chamfered corner of the socket.
11. Close and lock the SIM card latch.
78
9a9b
10 11b11a
Otros manuales para Dolphin 7800
3
Tabla de contenidos
Otros manuales de PDA de Honeywell
Honeywell
Honeywell CN75LAN Manual de usuario
Honeywell
Honeywell DOLPHIN 6100 Manual de usuario
Honeywell
Honeywell CN75WAN Manual de usuario
Honeywell
Honeywell Dolphin 70e Black Manual de usuario
Honeywell
Honeywell CT30 XP Series Manual de usuario
Honeywell
Honeywell CW45 Series Manual de usuario
Honeywell
Honeywell CN80 Series Manual de usuario
Honeywell
Honeywell Dolphin 7800 Manual de usuario
Honeywell
Honeywell Dolphin 6000 Manual de usuario
Honeywell
Honeywell 8680i RFID Manual de usuario
Honeywell
Honeywell Dolphin 6000 Manual de usuario
Honeywell
Honeywell Dolphin 9700 Manual de usuario
Honeywell
Honeywell ScanPal EDA57 Series Manual de usuario
Honeywell
Honeywell ScanPal EDA57 Series Manual de usuario
Honeywell
Honeywell Dolphin 99EXL0 I Series Manual de usuario
Honeywell
Honeywell 8690i Manual de usuario
Honeywell
Honeywell Dolphin 99 EX Manual de usuario
Honeywell
Honeywell ScanPal EDA56 Manual de usuario
Honeywell
Honeywell ScanPal EDA52 Manual de usuario
Honeywell
Honeywell CK75 Instrucciones de funcionamiento
