Honeywell GENT Manual de usuario
by Honeywell
RESPONSE PAGING SYSTEM
PAGER USER GUIDE
by Honeywell
Turning On the Pager
Press and hold for 2 seconds, the pager will then display the standby screen.
After a short time the pager screen will go blank to preserve the battery, press any key to return to the
standby screen.
Turning Off the pager
Go to the standby screen, press or keys to select the ‘Turn Off’ menu.
Press twice to confirm your choice.
Read Messages
To read a stored message, press from the standby screen.
Use or to scroll through the messages. Each message is allocated a slot number (i.e.
01, 02, 03 etc)
For messages that are longer than the two lines or to read the time and date of the message
press
You will automatically return to the standby screen.
Deleting Messages
Display the message to be deleted, hold for 2 seconds to view the delete menu.
To delete a single message use the to select ‘DEL’, press to Confirm Delete Message.
To delete all Messages use to select ‘D.ALL’, press to Confirm Delete Message.
You will automatically return to the standby screen.
by Honeywell
Set Alert
From the standby menu press or to select the ‘Set Alert’ menu.
Press to confirm your option. Use the or to select option (Vibrate/Tone/Vibe &
Tone/Silent)
Press to confirm your change.
Set Date & Time
From the standby menu press or to select the ‘Date & Time menu.
Press to confirm your option. Use the or to select correct data, press to
confirm each selection.
Press to confirm your change.
Icons
Pager on Low Battery Message locked
Beeping Alert Vibrate Alert Unacknowledged message
Out of range indicator Daily Alarm ON Melody
Current message is a duplicate Message continues on next page
Otros manuales para GENT
1
Tabla de contenidos
Otros manuales de Buscapersonas de Honeywell
