Honeywell MX7 Tecton Manual de usuario

MX7 Tecton™

Hand-Held Computer

With Microsoft Windows®Embedded CE 6 or

Windows Mobile®6.5 Operating System

Quick Start Guide

TECTON-QS Rev A

4/12

Setting up the MX7 Tecton

Please have the following Information available before

setting up your MX7 Tecton:

lNetwork ID (SSID) of the Access Point

lWEP key or LEAP authentication credentials

1. Insert a fully charged battery into the MX7

Tecton.

2. Press the Power button.

3. Accept the EULA.

4. Calibrate the touch screen.

5. Set the date and time.

6. Edit the radio parameters.

7. Edit the RFTerm Terminal Emulation

parameters (optional).

8. Perform a reboot.

Bluetooth and MX7 Tecton

Please refer to the MX7 Tecton Reference Guide for

information when using the MX7 Tecton with Bluetooth.

ActiveSync

Installing ActiveSync on Desktop/Laptop

ActiveSync (version 4.5 or higher for Windows XP

desktop/laptop computers) must be resident on the

host (desktop/laptop) computer. Windows Mobile

Device Center is required for a Windows

Vista/Windows 7 desktop/laptop computer. ActiveSync

and Windows Mobile Device Center for the PC are

available from the Microsoft website. Follow Microsoft's

instructions to locate, download and install ActiveSync

or Windows Mobile Device Center on your

desktop/laptop.

ActiveSync using USB-Client Connection

The only connection type is USB Client.

1. Connect the MX7 Tecton end of the USB cable

to the I/O port on the bottom of the MX7 Tecton.

2. Connect the USB type A connector on the I/O

cable to a USB port on a PC or laptop.

ActiveSync starts automatically when the USB cable is

connected.

When the MX7 Tecton loses connection (e.g., enters

Suspend Mode), the connection to ActiveSync will be

temporarily lost. When the MX7 Tecton resumes, the

ActiveSync session will automatically re-connect.

Please refer to the MX7 Tecton Reference Guide for

ActiveSync information.

Setting Up the Radio

If the access point uses an authentication protocol

(WEP, LEAP, etc.), your radio must use the same

authentication. Please contact your IT department for

WEP keys or LEAP credentials. Please refer to the

MX7 Tecton Reference Guide for information on using

WPA.

1. Tap Start > Programs > Summit > SCU OR

tap the Summit Client Utility icon on the

desktop.

2. Tap the Admin Login button and enter the

password (default = SUMMIT).

3. Tap the Profile tab and make sure the Default

profile is selected.

4. Select SSID and enter your SSID value.

5. If the access point is using WEP, select WEP

from the Encryption pull down list.

6. Tap the WEP keys/PSKs button and enter the

WEP Key(s) and tap OK. Skip to step 12.

7. If the access point is using LEAP, select LEAP

from the EAP Type pull down list.

8. Select WEP EAP from the Encryption pull down

list.

9. If the Cisco/CCS certified AP is configured for

open authentication, set the Auth Type radio

parameter to Open.

10. If the AP is configured for network EAP only, set

the Auth Type radio parameter to LEAP.

11. Tap the Credentials button and enter the User

Name and Password.

12. Tap the Commit button to save the radio

configuration.

13. Tap the Main tab. Wait for a radio connected

message.

14. Tap the Admin Logout button when finished.

15. Reboot the MX7 Tecton.

Please refer to the Radio Mode parameter in the MX7

Tecton Reference Guide. It is important that this

parameter setting corresponds to the Access Point to

which the MX7 Tecton connects.

Setting Up AppLock

MX7 Tecton devices are shipped to boot in

Administration mode. In this mode, the user has full

access to the device and no password is needed. After

the administrator completes the process below, the

MX7 Tecton switches to end-user mode and restricts

access to only the specified application(s).

1. Tap Start > Settings > Control Panel >

Administration icon.

2. Assign application(s) on the Application tab

screen.

3. Assign a password on the Security tab screen.

4. Select a view level on the Status tab screen, if

desired.

5. Tap OK.

6. Press the hotkey (Ctrl +Shift +A) sequence to

launch AppLock and lock the configured

application(s).

7. The device is now in end-user mode.

Connecting Using RFTerm

Before you make a host connection, you will, at a

minimum, need to know:

lthe alias name or IP address (Host Address)

and

lthe port number (Telnet Port) of the host system

to properly set up your host session.

1. Make sure the mobile client network settings

are properly configured. If you are connecting

via WLAN (802.11x), make sure your MX7

Tecton is connected to the network.

2. Launch RFTerm by tapping the RFTerm icon

on the desktop.

3. Select Session > Configure from the

application menu and select the host type. This

is dependent on the host system to which you

are connecting; i.e., 3270 mainframe, AS/400

5250 server or VT host.

4. Enter the Host Address of the system. This

may either be a DNS name or an IP address of

the host system.

5. Update the telnet port number if your host

application is configured to listen on a specific

port. If not, use the default telnet port.

6. Select OK.

7. Select Session > Connect from the application

menu or tap the Connect button on the Tool

Bar.

8. Upon a successful connection, the host

application screen is displayed.

To change options (e.g., Display, Colors, Cursor,

Barcode), please refer to the RFTerm Reference Guide

for descriptions of these and other features.

Rebooting the MX7 Tecton

To warmboot the MX7 Tecton with Windows CE 6.0:

1. Select Start > Settings > Control Panel >

Registry.

2. Tap the Warmboot button.

To warmboot the MX7 Tecton with Windows Mobile

6.5:

1. Using the Registry, select Start > Settings >

Control Panel > Registry.

2. Tap the Warmboot button.

When the MX7 Tecton is booting, there may be small

delays while the wireless client connects, applications

launch, remote management completes and Bluetooth

devices connect.

Otros manuales para MX7 Tecton

Tabla de contenidos

Otros manuales de Portátil de Honeywell

Honeywell

Honeywell ScanPal EDA51 Manual de usuario

Honeywell

Honeywell 8680i Series Manual de usuario

Honeywell

Honeywell ScanPal EDA51 Manual de usuario

Honeywell

Honeywell MX8 Manual de usuario

Honeywell

Honeywell CT50 Manual de usuario

Honeywell

Honeywell Dolphin 6110 Manual de usuario

Honeywell

Honeywell 7600BP-112-B6EE - Hand Held Products Dolphin... Manual de usuario

Honeywell

Honeywell Dolphin CN80 NI Manual de usuario

Honeywell

Honeywell Dolphin 7850 Manual de usuario

Honeywell

Honeywell Dolphin 9500 Series Manual de usuario

Honeywell

Honeywell MX7 Tecton Manual de usuario

Honeywell

Honeywell ScanPal EDA61K Series Manual de usuario

Honeywell

Honeywell Dolphin 60s Manual de usuario

Honeywell

Honeywell CK75LAN Manual de usuario

Honeywell

Honeywell Dolphin 60s Manual del propietario

Honeywell

Honeywell ScanPal 5100 Manual de usuario

Honeywell

Honeywell DOLPHIN 6500 Manual de referencia

Honeywell

Honeywell HX2 Manual de usuario

Honeywell

Honeywell Dolphin 75e Manual de usuario

Honeywell

Honeywell MX8 Manual de usuario

Honeywell

Honeywell CN70 Series Manual de usuario

Honeywell

Honeywell MX9 Manual de usuario

Honeywell

Honeywell Dolphin CT40 Manual de usuario

Honeywell

Honeywell CT50LON Manual de usuario

Manuales populares de Portátil de otras marcas

MiTAC

MiTAC Mio 168 Manual de usuario

Wasp

Wasp WDT92 Manual de usuario

Texas Instruments

Texas Instruments TI-Nspire Manual de usuario

AXEM Technology

AXEM Technology MBS Manual de usuario

Armstrong

Armstrong Brain Wave Instrucciones de montaje

Unitech

Unitech TB128 Manual de usuario

Symbol

Symbol MC9000-G Manual de instalación y operación

Unitech

Unitech HT1 1D Batch Manual de usuario

Ingenico

Ingenico IWL220 GPRS Manual de usuario

Intermec

Intermec CK61 Manual de usuario

Symbol

Symbol c2000 Manual de usuario

Symbol

Symbol MC18 Manual de instalación y operación

Acer

Acer n20 Manual de usuario

Intermec

Intermec CK61 Manual de usuario

Docomo

Docomo F-04H Manual de usuario

Toshiba

Toshiba e350 Series Manual de usuario

Palm

Palm Tungsten E2 Manual

Alien

Alien ALR-H460 Manual de usuario