Honeywell CT45 Series Manual de usuario
CT45/CT45 XP Series
powered by Android™
Quick Start Guide
CT45-A-EN-QS-01 Rev C
3/22
1
Agency Models
CT45 series: CT45-L0N, CT45-L1N-G, CT45-L1N-A
CT45 XP series: CT45P-X0N, CT45P-L1N-2, CT45P-L1N-E
Note: Due to variations in model configurations, your computer may
appear different than illustrated.
Out of the Box
Make sure that your shipping box contains these items:
• CT45/CT45 XP mobile computer
• Rechargeable li-ion battery
•Handstrap
• USB Type A to Type C cable
• Product documentation
If you ordered accessories for your mobile computer, verify that
they are also included with the order. Be sure to keep the original
packaging in case you need to return the mobile computer for
service.
Note: CT45-L0N and CT45P-X0N models do not include a WWAN radio.
Memory Card Specifications
Honeywell recommends the use of Single Level Cell (SLC)
industrial grade microSD™ or microSDHC™ memory cards with
mobile computers for maximum performance and durability.
Contact a Honeywell sales representative for additional
information on qualified memory card options.
2
Computer Features
Microphone
Power Button
Battery Status/
Notification LED
Speaker
(Handset Receiver)
Touch Panel
Scan Button
Microphone
Speaker
Scan Status LED
Scan Button
Imager Window
(LED/Laser Aperture)
Push-to-Talk
Button
Front Camera
3
Note: Hand strap not shown.
Scan Button
Volume Button
Camera Lens and Flash
Laser Safety
Label Location
Nano-SIM
and/or
MicroSD
Card Socket
Door
I/O Connector
Audio Jack
(Model Dependent)
USB, Type C
4
* Part of Honeywell Device Finder solution when CT45/CT45 XP mobile
computer is registered with Operational Intelligence.
Battery
Speaker Out for
Bluetooth Low
Energy Beacon*
(CT45 XP Only)
In Port for
Bluetooth Low
Energy Beacon*
(CT45 XP Only)
Microphone
Battery Latch
Barometer
Sensor
5
Install a Nano-SIM Card(s)
Either a nano-SIM card or embedded SIM (eSIM) is used to
activate the phone and connect to a mobile network. Supported
SIM type and activation method varies by model and model
configuration. Refer to the user guide for additional information
on eSIM or dual nano-SIM activation and provisioning.
CT45 series: CT45-L1N-xxxx2xx
CT45 XP series: CT45P-L1N-xxxx2xx, CT45P-L1N-xxxxExx
x = configuration variation
Note: Always power off the computer before attempting to install or
remove a card.
1
2
3
SIM 1
SIM 2*
* SIM 2 availability and type (i.e., eSIM or nano-SIM socket) are model
and model configuration dependent.
6
Install a microSD Card (Optional)
CT45 series: CT45-L1N-xxxx2xx
CT45 XP series: CT45P-L1N-xxxx2xx, CT45P-L1N-xxxxExx
x = configuration variation
Note: Format the microSD card before initial use.
Note: Always power off the computer before attempting to install or
remove a card.
1
2
7
Install a microSD Card (Optional)
CT45 series: CT45-L0N-xxxx0xx
CT45 XP series: CT45P-X0N-xxxx0xx
x = configuration variation
Note: Format the microSD card before initial use.
Note: Always power off the computer before attempting to install or
remove a card.
34
1
2
8
About the Battery
The mobile computer ships with a 3.85 VDC, 15.5 watt-hour
Li-ion battery manufactured for Honeywell International Inc.
Before you attempt to use, charge or replace the
battery in the device, carefully read all labels,
markings and product documentation provided in the
box or online at sps.honeywell.com. To learn more
about Battery Maintenance for Portable Devices, go
to honeywell.com/PSS-BatteryMaintenance.
Avant d’essayer d’utiliser, de charger ou de remplacer
la batterie de l’appareil, lisez attentivement toutes les
étiquettes, marquages et documentation du produit
fournis dans la boîte ou en ligne à sps.honeywell.com.
Pour en savoir plus sur l’Entretien de Batteries pour
Appareils Portables, consultez-le
honeywell.com/PSS-BatteryMaintenance.
We recommend use of Honeywell Li-ion battery
packs. Use of any non-Honeywell battery may result
in damage not covered by the warranty.
Nous recommandons l’utilisation de batteries Li-ion
de la marque Honeywell. L’utilisation d’une batterie
d’un autre fabricant est susceptible de provoquer des
dommages non couverts par la garantie.
Ensure all components are dry prior to placing the
battery in the computer. Mating wet components
may cause damage not covered by the warranty.
Assurez-vous que tous les composants sont secs avant
d’insérer la batterie dans l’ordinateur. L’insertion de
composants humides risque de provoquer des
dommages non couverts par la garantie.
9
Install Battery
1
2
Otros manuales para CT45 Series
2
Este manual sirve para los siguientes modelos
11
Tabla de contenidos
Otros manuales de Portátil de Honeywell
Honeywell
Honeywell Dolphin 6110 Manual de usuario
Honeywell
Honeywell Dolphin 7600 Manual de usuario
Honeywell
Honeywell HX2 Manual de usuario
Honeywell
Honeywell Dolphin 75e Manual de usuario
Honeywell
Honeywell Dolphin 75e Manual de usuario
Honeywell
Honeywell Dolphin 70e Black Manual de usuario
Honeywell
Honeywell Dolphin 7850 Manual de usuario
Honeywell
Honeywell Dolphin CT40 Manual de usuario
Honeywell
Honeywell MX9 Manual de usuario
Honeywell
Honeywell EDA50K-0 Manual de usuario
Honeywell
Honeywell CT50 Manual de usuario
Honeywell
Honeywell 7600BG-122-B4EE - Hand Held Products Dolphin... Manual de usuario
Honeywell
Honeywell Marathon Manual de usuario
Honeywell
Honeywell ScanPal EDA50 Manual de usuario
Honeywell
Honeywell Dolphin CN80 NI Manual de usuario
Honeywell
Honeywell Dolphin 6000 Manual de usuario
Honeywell
Honeywell MX8 Manual de usuario
Honeywell
Honeywell Dolphin 6110 Manual de usuario
Honeywell
Honeywell Optimus 5100 Manual de usuario
Honeywell
Honeywell CN75 Manual de usuario
