Honeywell NOTIFIER ID61 Manual de usuario
ID61/62 operating
manual
997-458-000-8, Issue 8 January 2010
ID61/62 Series Panels - Operating Manual
Contents
i 997-458-000-8, Issue 8
January 2010
Contents
1 Introduction 1
1.1 Associated Documents 1
1.2 The ID61/62 Series Panels 1
1.2.1 Device Type Abbreviations 2
1.3 Cleaning 2
2 Panel Controls and Indicators 3
2.1 Controls 3
2.2 Indicators 4
3 Automatic Alarms - What to do 5
3.1 Fire 5
3.1.1 Fire in Delayed Mode 7
3.2 Pre-alarm 7
3.3 Fault 8
3.3.1 Power Fail 10
3.4 Plant Alarm 11
3.5 Fault Output: Fault/Disabled (Optional) 11
4 Operator Actions at Panel 12
4.1 Introduction 12
4.1.1 Liquid Crystal Display 12
4.1.2 Internal Buzzer 13
4.1.3 Access Codes 13
4.1.4 Keyswitch 14
4.2 MUTE BUZZER Pushbutton 14
4.3 EXTEND DELAY Pushbutton 14
4.4 END DELAY/EVACUATE Pushbutton 15
4.5 SILENCE/RESOUND Pushbutton 16
4.6 RESET Pushbutton 17
4.7 Numeric Keys 18
4.7.1 Cancellation/Termination Button 18
4.7.2 Level 2 Options Menu Button 18
4.8 Level 2 Option Menus 19
4.9 TEST - User Option 20
4.9.1 LEDs - User Option 21
4.9.2 LCD - User Option 21
4.9.3 Zones - User Option 22
4.9.4 Auto High Test - User Option 24
ID61/62 Series Panels - Operating Manual
Contents
ii997-458-000-8, Issue 8
January 2010
4.9.5 Outputs - User Option 25
4.9.6 Buzzer - User Option 27
4.9.7 Keyboard - User Option 27
4.10 DISABLE / ENABLE - User Option 28
4.10.1 Zones - User Option 29
4.10.2 Outputs - User Option 31
4.10.3 Day Mode - User Option 32
4.10.4 Delays - User Option 33
4.11 CLOCK - User Option 34
4.11.1 Time - User Option 35
4.11.2 Date - User Option 36
4.12 VIEW MODE - User Option 37
4.12.1 Log - User Option 38
4.12.2 Devices - User Option 39
4.12.3 Faults - User Option 40
4.12.4 Input Events - User Option 41
4.12.5 Disabled - User Option 42
4.12.6 Alarm Count - User Option 42
4.12.7 Voltages - User Option 43
4.12.8 Version - User Option 44
4.13 Commissioning 44
4.14 PRINT - User Option 44
4.14.1 Print Log 45
4.14.2 Print Disablements 45
4.14.3 Print On-Demand 46
4.14.4 Print Continuous - Purge 46
4.14.5 Print Maintenance Log 47
Appendix 1 - Log Book A1-1
Appendix 2 - Maintenance A2-1
Appendix 3 - VIEW™ & SMART 4 Sensors A3-1
ID61/62 Series Panel - Operating Manual
997-458-000-8, Issue 8
January 2010
Contents
iii
ID61/62 Series Panels
(ID61 Panel shown)
RESET
MUTE BUZZER
MUTE BUZZER
EXTEND DELAY
EXTEND DELAY
SILENCE/
RESOUND
SILENCE/
RESOUND
END DELAY/
EVACUATE
END DELAY/
EVACUATE
46
00..9
31
1
7
5
[
98
4
2
2345678910
11 12 13 14 15 16
ZONE FIRE
ZONE FIRE
ZONE FAULT/
DISABLE/TEST
ZONE FAULT/
DISABLE/TEST
FIRE
DISABLEMENT FAULT
TEST POWER SUPPLY FAULT
EARTH FAULT
POWER
PLANT ALARM
FIRE OUTPUT ACTIVE
DELAYS ACTIVE
FIRE OUTPUT: FAULT / DISABLED
FIRE CONTROL O/P: FAULT / DISABLED
PRE- ALARM
SYSTEM FAULT
SOUNDER: FAULT / DISABLED
ID61/62 Series Panels - Operating Manual
Introduction
1 997-458-000-8, Issue 8
January 2010
1 Introduction
This manual contains operating instructions for the ID61/
62 Series Fire Detection Panel. Additional operating
instructions for the VIEW™ and SMART 4 sensors are
given in Appendix 3.
Users of this manual are assumed to be working with a
panel that has already been installed and configured
appropriately for the area under its supervision.
1.1 Associated Documents
This manual does not describe the installation or
configuration procedures of the panel. For information on
these topics, refer to the ID61/62 Series Panel -
Installation, Commissioning and Configuration Manual
(Ref. 997-457-000-X).
1.2 The ID61/62 Panels
The panel, as supplied by NOTIFIER, is a 1-loop, 16-zone
Analogue Addressable Panel. The single loop has the
capacity for up to 99 analogue sensors plus up to 99
modules and, in some installations, panels may also be
connected to repeaters using the RS485
Communications Link. The panel can also support an
internal printer (optional).
All the control and operation functions described in this
manual can be carried out using the pushbuttons on the
front of the panel.
A keyswitch is provided which, when set to the right, has
the same effect as entering an access 2 passcode. Set
it to the centre to cancel out of all menus and return to
the Status: NORMAL display. This indicates access
level 2 is de-selected.
ID61/62 Series Panels - Operating Manual
Introduction
2997-458-000-8, Issue 8
January 2010
1.2.1 Device Type Abbreviations
Throughout this manual the panel may refer to devices
by an abbreviated name. The following table lists the
device type abbreviation and its description.
1.3 Cleaning
The panel case may be cleaned periodically by wiping
with a soft, damp lint-free cloth.
Do not use solvents.
Abbreviation Type Description
AUX Plant Warning Input
AVR Advanced VIEW™ Reference
AVS Advanced VIEW™ Sensor
CTL Monitored (Relay Type) Output
DKM Tri-state MCP (not supported in UK)
ESM Extinguishant System
ESO Monitored Extinguishing System Output
EST Extinguishant Monitor System Trigger
ION Ionisation Smoke Detector
IRL Immediate Release Input
LBM Loop Booster Module
MCP Manual Call Point
MLT Advanced Multi Sensor
MNS Monitor module (no short-circuit)
MON Fire Alarm Monitor Input
MRL Manual Release Input
M-CZ Conventional Interface input (OPAL)
OPT Optical/Photo-electric Smoke Detector
OPX Optiplex Multi-sensor
RLY Unmonitored (RelayType)orO/COutputs
SM4 SMART muti-criteria sensor
SDR Monitored (Sounder Type) Output
SDH Monitored(SounderType)Output-highload
SM2 SMART 2 Multi-criteria Sensor (OPAL)
SM3 SMART 3 Multi-criteria Sensor
SM4 SMART 4 Multi-criteria Sensor
STRB Strobe (OPAL)
TMP Temperature Detector
ID61/62 Series Panel - Operating Manual
Panel Controls & Indicators
3 997-458-000-8, Issue 8
January 2010
2 Panel Controls and Indicators
The panel’s controls and indicators are used to operate
the overall system and display the panel status. The panel
has four function pushbuttons, twelve numeric/cursor
keys and thirty-two zonal LED indicators, two ‘FIRE’
indicators and fourteen system status LED indicators.
2.1 Controls
The pushbuttons are listed below, together with
references to the relevant sections of the manual:
Function Pushbuttons
•MUTE BUZZER (Section 4.2)
•RESET - (Section 4.3)
•END DELAY/EVACUATE1- (Section 4.4)
•SILENCE/RESOUND - (Section 4.5).
•END DELAYS/EVACUATE - (Section 4.6).
1Also configurable as Transmission Device (TD)
Enable/Disable.
Numeric/Cursor Keys
•Numeric/Cursor keys - (Section 4.6).
Keyswitch
Turn the keyswitch to enable level 2 access. The
keyswitch provides an alternative to entering the level 2
access code via the numeric keys. See Section 4.1.3
and Section 4.1.4.
EXTEND DELAY
END DELAY/
EVACUATE
SILENCE/
RESOUND
RESET
MUTE BUZZER
FIRE
RESET
MUTE BUZZER
MUTE BUZZER
EXTEND DELAY
EXTEND DELAY
SILENCE/
RESOUND
SILENCE/
RESOUND
END DELAY/
EVACUATE
END DELAY/
EVACUATE
46
00..9
31
1
7
5
[
98
4
2
2345678910
11 12 13 14 15 16
ZONE FIRE
ZONE FIRE
ZONE FAULT/
DISABLE/TEST
ZONE FAULT/
DISABLE/TEST
DISABLEMENT FAULT
TEST POWER SUPPLY FAULT
EARTH FAULT
POWER
PLANT ALARM
FIRE OUTPUT ACTIVE
DELAYS ACTIVE
FIRE OUTPUT: FAULT / DISABLED
FIRE CONTROL O/P: FAULT / DISABLED
PRE- ALARM
SYSTEM FAULT
SOUNDER: FAULT / DISABLED
ID61/62 Series Panel - Operating Manual
Panel Controls & Indicators
4997-458-000-8, Issue 8
January 2010
2.2 Indicators
The panel status indicators comprise three groups:
a. Zone Status LED indicators.
b. Panel/System LED indicators.
c. Visible/Audible indicators.
Zone Status LED Indicators
•ZONE FIRE - these LEDs indicate affected zone(s).
•ZONE FAULT/DISABLE/TEST - these LEDs indicate
affected zone(s).
Panel/System LED Indicators
•FIRE - these LEDs indicate a fire condition.
•Other System Status LEDs:
FAULT indicates a fault has been
detected by the panel.
DISABLEMENT indicates the presence of a
manually-configured
disablement.
TEST indicates a test is in progress.
DELAY ACTIVE indicates delays are active.
FIRE OUTPUT ACTIVE indicates fire outputs have
been operated.
PRE-ALARM1indicates a pre-alarm
condition exists.
POWER indicates status of power
supply.
SYSTEM FAULT indicates the CPU has reset
or a system fault has occurred.
EARTH FAULT indicates an earth fault has
occurred.
PLANT ALARM2indicates a fault or warning
from a plant-monitoring device.
FIRE CONTROL O/P: FAULT/DISABLED
indicates a fire control output
fault or disablement.
FIRE OUTPUT: FAULT/DISABLED
indicates a fire output fault or
disablement
SOUNDER: FAULT/DISABLED
indicates a sounder circuit
fault or disablement
POWER SUPPLY FAULT
indicates an unsatisfactory
power supply to the panel.
1This LED is also configurable as SOUNDERS SILENCED.
2This LED can be configured as: FAULT O/P: FAULT/
DISABLED.
Visible/Audible Indicators
•Liquid Crystal Display (LCD) - (Section 4.1.1).
•Internal Buzzer - (Section 4.1.2).
FIRE
FIRE OUTPUT ACTIVE
DELAYS ACTIVE
POWER
FAULT
DISABLEMENT
TEST
PRE-ALARM
EARTH FAULT
PLANT ALARM
SOUNDER: FAULT/ DISABLED
FIRE OUTPUT: FAULT/ DISABLED
FIRE CONTROL O/P: FAULT/ DISABLED
SYSTEM FAULT
POWER SUPPLY FAULT
ID61/62 Series Panel - Operating Manual
Automatic Alarms - What to do
5 997-458-000-8, Issue 8
January 2010
3 Automatic Alarms - What to do
Before any automatic alarms have been sounded the
panel only operates in display mode (quiescent state).
Only one alarm condition can be displayed at a time
on the LCD. If fire alarms, faults and/or warning conditions
(Plant Alarm) are present on the panel at the same time,
they are displayed in the following priority order:
a. Fire Alarms
b. Pre-alarms
c. Faults
d. Warnings.
The alarm condition is registered in a log.
The user must then enter a Level 2 access code, or turn
the keyswitch to the right, to enable the panel’s
pushbuttons. When the Level 2 access code is active,
the ‘
2
/
8
’ buttons can be used to scroll through the
alarms and the ‘
4
’ button will display the first alarm.
3.1 Fire
Automatic panel actions:
If the system detects a fire alarm, the panel always does
the following automatically:
a. Operates the internal (high-pitched) buzzer.
b. Illuminates the red FIRE LEDs, and the numbered
red ZONE FIRE LED.
c. Displays information on the LCD regarding the fire
condition. The information includes device address
and device locaion (see example below).
Note: If a delay is configured DELAYED is displayed
on the top line of the LCD. When a delay is active
the DELAY ACTIVE LED illuminates and the
remaining time before the first day mode delay
expires is displayed every 5 secs. The LED only
extinguishes when the delay period has expired.
d. Operates the sounders and outputs according to the
panel’s Control-by-Event (CBE) Rules (configured
during the Commissioning stage).
FIRE 02 / 05 Z01 M12 MCP 11:59
MAIN BUILDING BASEMENT ROOM 23
ALARM
CONDITION
ZONE TEXT DEVICE ADDRESS
TIME OF LOGGED
ALARM CONDITION
DEVICE
TYPE
DISPLAYED
ALARM
CONDITION
LOGGED
ALARM
CONDITIONS
ZONE
NUMBER
DEVICE TEXT
TEST
TEST
DELAYS ACTIVE
DELAYS ACTIVE
FIRE OUTPUT: FAULT/ DISABLED
FIRE OUTPUT: FAULT/ DISABLED
ID61/62 Series Panel - Operating Manual
Automatic Alarms - What to do
6997-458-000-8, Issue 8
January 2010
Recommended operator actions:
Note: In the recommended operator actions described below
only MUTE BUZZER and END DELAY are selectable
atAccess Level 1. The operation of EXTEND DELAY,
EVACUATE, SILENCE, RESOUND and RESET must
only be possible at access Level 2, in accordance with
the requirements of EN54:Part 2.
1Operate the MUTE BUZZER pushbutton to silence
the panel’s internal buzzer.
2Follow prescribed instructions for evacuation of
premises, notification of Fire Brigade and investigation
of source of fire.
3If additional sounder operations are required to
achieve a complete and immediate evacuation of the
premises, press the END DELAY /EVACUATE
pushbutton (needs access level 2). This will cause
the internal buzzer to resound, so press the MUTE
BUZZER pushbutton to silence.
4When more than one fire Alarm condition is present,
it is possible to manually scroll through all logged Fire
Alarm conditions using the ‘
2
/
8
’ arrows.
5When evacuation of the premises is achieved, or at
the direction of an authorised person, the Alarm
Sounders may be silenced by pressing the
SILENCE / RESOUND pushbutton.
Note: The SOUNDERS SILENCED LED illuminates if
this option was configured during panel
commissioning. The default function for this LED
is PRE-ALARM.
6To re-start the sounders, press the
SILENCE / RESOUND pushbutton. You must wait at
least 10 seconds after having originally silenced the
sounders before resounding them. If the SOUNDERS
SILENCED LED option was configured during
commissioning to illuminate, this will now extinguish.
7When the cause of the alarm has been removed and
call points and input devices have been locally reset,
the system may be returned to ‘Status: NORMAL’*
by pressing the RESET pushbutton.
*Unless the Site name menu was edited during
commissioning - refer to Section 4.1.1 Liquid crystal
Display.
Status: NORMAL
Sat 01/12/2001 00:00:00
1
3
4
5
6
7
EN54-2: 7.6.1, 7.8, 8.7.1,
9.1.2
Ensure EN54 compliance
for access to controls.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Alarma de incendios de Honeywell
Honeywell
Honeywell Fire-Lite Alarms BG-12S Manual de usuario
Honeywell
Honeywell NFS Supra Manual de usuario
Honeywell
Honeywell Fire-Lite BG-12LX Manual de usuario
Honeywell
Honeywell Farenhyt Series Manual de usuario
Honeywell
Honeywell C7076A Manual de usuario
Honeywell
Honeywell 800-04433V1 Instrucciones de montaje
Honeywell
Honeywell SILENT KNIGHT SK-5208 Manual de usuario
Honeywell
Honeywell Notifier NFS-320SYS Manual de usuario
Honeywell
Honeywell SMX-AUS Manual de usuario
Honeywell
Honeywell HW-TG7FS-V Guía de instalación
Honeywell
Honeywell XLS140 Manual de usuario
Honeywell
Honeywell 6808 Manual de usuario
Honeywell
Honeywell SILENT KNIGHT SWIFT Manual de usuario
Honeywell
Honeywell TC844A1015 Manual de usuario
Honeywell
Honeywell NOTIFIER FireWarden-100-2 Manual de usuario
Honeywell
Honeywell Silent Knight 6820EVS Especificaciones técnicas
Honeywell
Honeywell STX Instrucciones de funcionamiento
Honeywell
Honeywell Apex Manual de usuario
Honeywell
Honeywell Notifier LCD2-80 Manual de usuario
Honeywell
Honeywell ESSER FACP Manual
