Honeywell 51404897-501 Manual de usuario
43-DR-33-51 Page 1of 2
VRX/VPR Rear Terminal Cover (51404897-501)
Instruction Sheet
Document: 43-DR-33-51
Revision: A
Effective: 12/98
Supersedes: Nothing
Kit Contents
Part Qty
Rear Cover 1
Standoffs 4
Lock washers 4
Screws 4
Rubber Grommets 4
Materials needed
Phillips screwdriver
Grounded ESD wrist strap or ESD-safe work area
Precautions
•Wear a grounded ESD strap when handling parts.
•To prevent electric shock, disconnect power from instrument before servicing.
Page 2of 243-DR-33-51
Figure 1 Rear Terminal Cover
Rear Terminal Cover Installation Procedure
Step Action
1Disconnect power to the instrument.
2With a screwdriver or sharp pointed instrument, remove centers from the 4 rubber grommets (part 97).
Insert the grommets into the 4 slots in the rear cover (part 95).
3On the rear of the instrument, one at a time remove each screw from a corner of the rear terminal board
and replace it with a lockwasher (part 98) and standoff (part 96).
4One at a time, disconnect instrument wires at the terminals and feed each wire outside in through the
most convenient grommet. After feeding a wire through, reconnect it to its terminal.
5Attach cover to standoffs with screws (part 2).
Tabla de contenidos
Otros manuales de Recinto de Honeywell
Honeywell
Honeywell PRO22ENC2 Manual de usuario
Honeywell
Honeywell HPB407 Manual técnico
Honeywell
Honeywell HHC12 Series Manual de usuario
Honeywell
Honeywell Versaguard TG509 Manual de usuario
Honeywell
Honeywell Fire-lite ROME Series Manual técnico
Honeywell
Honeywell NetAXS-123 Guía de instalación
Honeywell
Honeywell PRO-2200 Manual de usuario
