Honeywell Galaxy 16 Manual de usuario
16 and 16 plus
Users Guide
123
456
789
0
ent
esc
*#
A
u
B
u
GALAXY 16+ V2.XX
06.22 TUE 30 JUN
iii
Contents
INTRODUCTION ......................................................................... v
QUICK OPERATION GUIDE .....................................................vii
GLOSSARY OF TERMS ............................................................ ix
KEYPAD INFORMATION ........................................................... 1
Star (Ö) Key Features ............................................................................. 2
SETTING AND UNSETTING THE SYSTEM ............................... 3
Setting the System ................................................................................... 3
Unsetting the System ............................................................................... 4
Cancelling Alarms .................................................................................... 5
USER MENU ............................................................................... 7
Option 1 Omit ........................................................................................ 7
Option 2 Chime ..................................................................................... 8
Option 3 Walk ....................................................................................... 8
Option 4 Codes ..................................................................................... 9
Option 5 Test ...................................................................................... 10
Option 9 Log ....................................................................................... 11
Option 10 Time ................................................................................... 12
APPENDIX A ALARM AND HELP MESSAGES ...................13
APPENDIX B AVOIDING FALSE ALARMS..........................15
ZONE REFERENCE TABLE ......................................................17
INTRODUCTION
The Galaxy 16 and 16 plus control panels are designed to the highest speci-
fications and requirements using the most advanced software and hardware
technology.
The Galaxy 16 and 16 plus are designed to satisfy the requirements of do-
mestic and smaller commercial installations, yet are flexible enough to pro-
vide ease of use and operational versatility.
This Users Guide contains the information required to operate the system.
The installation engineer will program and commission the system to meet
your requirements. The system is simple to operate but users are advised to
read this guide carefully before using the system and retain it in a safe place
for future reference.
v
vii
ENTER YOUR USER
CODE THEN SELECT
QUICK OPERATION
GUIDE
A SET (an Unset system)
B PART SET (Defaults to Parts 1 and 2)
1key toggles the Set (ON)/Unset (OFF) status of Part 1
2key toggles the Set (ON)/Unset (OFF) status of Part 2
3key toggles the Set (ON)/Unset (OFF) status of Part 3
ent UNSET (a Set system)
1 OMIT ZONES
Aor Bkey to view zones
#to change omit status of zone (must be an omittable zone)
ent key to accept programming and start setting
esc key to accept programming without setting
2 CHIME ZONES
Aor Bkey to view zones
#key to enable/disable chime function on zone
ent key to accept
esc key to cancel
3 WALK TEST
A or Bkey to view zones
#key to enable/disable Walk Test function on zone
ent key to start Walk Test
#key to toggle display between open and tested zones
esc key to end Walk Test
Note: Zones number 10 to 16 will be displayed as A to G
4 (ASSIGNING) USER CODES
Aor Bkey to select user (1 14)
ent key to program code
number keys to enter digits, Ökey to delete digits
ent key to accept programming, esc to cancel
5 TEST OUTPUTS
Aor Bkey to select output for test
#key to enable/disable test function on zone
esc key to end test
9LOG
Akey to step forwards through events
Bkey to step backwards through events
#key to display event date
esc key to exit Log
ent+BTIME
To access the Time option, enter your user code, press the
ent key, the Bkey and then the ent key.
Then press the:
1key to select Time (hh/mm)
2key to select Date (dd/mm/yy)
3key to select Start Summer (dd/mm)
4key to select End Summer (dd/mm).
Press the ent key to accept the programming for each option,
or the esc key to cancel.
GLOSSARY OF TERMS
Chime: Zone attribute which gives an audible indication of the
activation of a detector or contact.
Duress: Applicable when a remote signalling device is fitted.
A Duress code entered at the keypad will unset the
system but transmit a Duress code to the Alarm Re-
ceiving Centre.
Entry Time: The preset time allowed for users to reach the keypad
and unset the system.
Exit Time: The preset time allowed for users to leave the building
after the setting routine has been initiated.
Exit Terminator: A switch or push-button located outside the protected
area and used to set the system.
Event Log: The control panel memory which stores, in sequence,
a record of the system events.
Final Exit: The last door closed or detector operated by the user
on exit.
LCD Liquid Crystal Display.
Nonomit: An alarm circuit which cannot be omitted (bypassed)
by the user.
Numeric Keypad: The unit comprising the LCD display and buttons that
is the interface between users and the system.
Omit: Setting the system with alarm zones excluded from the
system. Only zones programmed as omittable by the
engineer can be omitted.
PA Panic Alarm: an emergency button or switch used to
set off the alarm; results in instantaneous transmission
of a silent alarm signal using the remote signalling de-
vice.
Part Set: To set only a section of the full system.
Programme: To alter the system functions or parameters.
Set: To arm the system.
Unset: To disarm the system.
User Code: A four digit code that identifies users to the system.
Walk Test: A routine test of the alarm detectors.
Security Circuit: An alarm circuit which has been programmed to be
armed continuously whether the system is set or
not.
ix
x
Otros manuales para Galaxy 16
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Panel de control de Honeywell
Honeywell
Honeywell AQ25A Series Manual de usuario
Honeywell
Honeywell TotalZone TZ-4 Manual de operación
Honeywell
Honeywell TrolATemp TZ-3 TotalZone Manual de operación
Honeywell
Honeywell Notifier ID50 Hoja de instrucciones
Honeywell
Honeywell AQ250 Series Manual de operación
Honeywell
Honeywell ADEMCO VISTA SERIES Guía de instalación
Honeywell
Honeywell Fire-Lite Alarms MRP-2001 Manual de usuario
Honeywell
Honeywell Domonial cmi Manual de usuario
Honeywell
Honeywell 5110XM Manual de usuario
Honeywell
Honeywell CM737 Instrucciones de instalación
Honeywell
Honeywell MS-9200UDLSE Manual de usuario
Honeywell
Honeywell Securit 800L Manual de usuario
Honeywell
Honeywell Accenta Manual de usuario
Honeywell
Honeywell Fire-Lite Alarms ES-50X Manual de usuario
Honeywell
Honeywell IFP-2100 Especificaciones técnicas
Honeywell
Honeywell VISTA-128BPT Guía de inicio rápido
Honeywell
Honeywell TrueZONE HZ221 Manual de usuario
Honeywell
Honeywell Notifier NFS2-640/E Manual del propietario
Honeywell
Honeywell HVC0001 Manual de usuario
Honeywell
Honeywell NOTIFIER SFP-5UD Series Manual de usuario
