Honeywell ES800 Manual de usuario

Portable Evaporative Air Cooler

User Manual

Read and save these instructions before use

www.honeywellhomecomfort.com

E-mail: info@honeywellhomecomfort.com

Model: ES800

PARTS DESCRIPTION

1) Remote Control 7) Detachable Water Tank

2) Remote Control Receptor 8) Castors

3) Control Panel 9) Rear Grill

4) Handle 10) Power Cord Inlet

5) Louvers 11) Power Adapter & Cord

6) Water Level Indicator

with Light

WARNING -- READ AND SAVE THE AIR COOLER SAFETY & MAINTENANCE GUIDE AND USER

MANUAL BEFORE USING THIS PRODUCT. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY

DAMAGE AND/ OR IMPAIR ITS OPERATION AND VOID THE WARRANTY. IN CASE THERE IS

ANY INCONSISTENCY OR CONFLICT BETWEEN THE ENGLISH VERSION AND ANY OTHER

LANGUAGE VERSION OF THE CONTENT OF THIS MATERIAL, THE ENGLISH VERSION SHALL

PREVAIL.

USE & OPERATION

Icons on Display Screen

CONTROL PANEL

Cool Swing

Power ON/OFF

TurboBlast

QuietSleep

Speed

Low Water Alarm

Timer

USE & OPERATION (CONTINUED)

POWER

Connect the power adapter to the cooler and to the electrical outlet. Press the button to turn the

unit on. The cooler will start automatically at low speed. To turn the unit off, press the button again.

COOL

Press the button to select Cool mode.

Please make sure the water tank is filled with water above the minimum level mark. Pressing the

COOL indicator light on the display screen activates evaporative cooling. The water pump will

operate and you will feel the cooler air after the Honeycomb Cooling Media is completely wet.

Note: When the cooling function is switched OFF, the unit can still function in a fan only mode

(without evaporative cooling).

FUNCTION BUTTONS

SPEED

Press the button repeatedly to change the fan speed between - - - .

The indicator light will show the selected speed:

QUIETSLEEP/ TURBOBLAST

Press the button to select either QuietSleep or TurboBlast modes. QuietSleep mode minimizes wind

speed for lower airﬂow. TurboBlast mode blasts wind at high speed for stronger airﬂow.

SWING

Press the button until the SWING indicator light is illuminated on

the display screen. The louvers will begin to move left to right automatically.

TIMER

Press the button until the desired time duration setting is selected. When the set time has passed,

the unit will automatically turn off (unit remains in Standby mode until power cord is unplugged from

electrical socket). The TIMER function allows you to program the unit for up to 7.5 hours of use.

When AUTO is selected, the wind speed will gradually decrease and increase between the TurboBlast

and QuietSleep fan speeds.

(Low) (Medium) (High) (Auto)

LOUVER

MOVEMENT

USE & OPERATION (CONTINUED)

REMOTE CONTROL

COOLER LOCATION

NOTE:

•

The remote control requires a CR2025 (1 x 3V) coin type or equivalent battery for replacement.

Open the battery compartment at the back of the remote control and insert the battery inside.

Care must be taken to insert the batteries according to the correct polarity (+ / –) markings

shown inside the battery compartment.

Always point the remote control signal transmitter towards the unit when operating. Make sure

that the signal path is not obstructed.

Remove the batteries if the unit is not going to be used for an extended period of time.

Do not drop the remote control.

Do not mix different types of batteries such as alkaline, carbon-zinc, or rechargeable batteries.

Do not mix old and new batteries.

Do not recharge the battery.

Exhausted batteries are to be removed from the product and safely disposed of as per local

regulations.

Do not dispose of batteries in ﬁre. Batteries may explode or leak.

WARNING: Caution for ingestion of the small battery. Keep away from children and animals.

POWER :

ON / OFF

Low / Medium / High / Auto

Controls the motion of the louvers

Evaporative cooling on/off

Controls the Timer function for automatic off

QuietSleep / TurboBlast mode

FAN SPEED

SWING

TIMER

QuietSleep/

TurboBlast

COOL

Make sure to position the air cooler correctly before you set up and start using the product. Please

refer to the COOLER LOCATION section of the separate Safety & Maintenance Guide.

USE & OPERATION (CONTINUED)

CAUTION:

Remove the power adapter and cord from the unit and the electrical outlet before emptying or

reﬁlling the water tank. Wait for 2 minutes before removing the Water Tank to allow any excess water

in the Honeycomb Cooling Media to drip into the tank before removing it.

Note: After removing the tank, water from the Honeycomb may continue to drip and collect in the

tank compartment. Simply wipe dry with a clean, dry cloth.

Slide out the Water Tank. Reﬁll the tank when water level is low. Do not ﬁll

water above the "Max." water level mark to avoid water droplets collecting

on the louvers. Check the water level in the tank before running the

COOL function. The Low Water Alarm will sound when water is low.

Running the unit in COOL mode with inadequate water may cause pump

failure.

If ice is available, you may add ice in the top ice compartment to enhance

the cooling performance.

Note: The water capacity refers to the total volume of water that can be

contained within the air cooler water tank and water distribution system.

The water capacity in the tank at the “Max.” indicator level may be lower

than the actual water capacity of the air cooler.

WATER FILTER*

Some models are equipped with a water ﬁlter in the tank, which helps to

ﬁlter dust, hair and other particles from entering the water tank. Simply

pour water over the ﬁlter when reﬁlling the tank.

To clean the water ﬁlter, simply push the bottom of the ﬁlter cup upwards

to release from the filter frame. Remove dust and hair from the filter

sponge and rinse under clean water. When clean, replace the sponge

and secure the ﬁlter cup back into the frame.

*Applicable for models with water ﬁlter feature only.

FILLING WITH WATER & ICE

Front water ﬁll door

for easy tank reﬁll

Ice Compartment

WARNING: Do not fill water tank with dirty water or salt water. This can damage the unit and

Honeycomb media.

Filter Cup

Water

Filter

AUTOOFF SAFETY SYSTEM

This unit is equipped with an AutoOff Safety System. When the water tank is detached from the unit

or if the tank is incorrectly positioned, the air cooler will turn off automatically. To restart the cooler,

the tank must be attached to the unit correctly.

USE & OPERATION (CONTINUED)

When the unit turns on, the water level indicator located at the front of the water tank will light up

to produce an elegant glow. This can be convenient as a night light during the night. This light will

remain on for as long as the air cooler is turned on.

The unit is equipped with a low water sensor. In Cooling Mode, when water in the tank is below the

minimum level, you will hear a beeping sound and the indicator light will ﬂash continuously. The unit

will automatically pause evaporative cooling.

Reﬁll the water tank to deactivate the alarm in cooling mode. First switch OFF the unit and unplug

from the power outlet. Fill the water tank with water above the minimum water level mark. Plug in and

switch ON again.

To deactivate the alarm and continue using the unit as a fan (without evaporative cooling), switch

the unit OFF and then ON again. The Low Water Alarm will not activate in Fan only mode. The Low

Water Alarm will sound again if the COOL function is activated while the water tank is still empty.

*Applicable for models with low water alarm feature only.

FILLING WITH WATER & ICE (CONTINUED)

LOW WATER ALARM*

WATER LEVEL INDICATOR LIGHT

USE & OPERATION (CONTINUED)

CLEANING & DRAINING THE WATER TANK

If the cooler will not be used for a long period of time, please refer to the STORAGE & MAINTENANCE

GUIDELINES located in the separate Safety & Maintenance Guide.

WARNING:

Before cleaning the unit, switch the unit OFF and disconnect the power adapter from the unit and

electrical socket.

*Applicable for models with water ﬁlter feature only.

Slide out and empty the water tank.

Rinse the water tank with clean water.

Carefully remove the Water Tank Filter* (if your unit has this) from the tank. Remove dust and hair

from ﬁlter and then rinse with water until clean. Dry and replace the ﬁlter back into the water tank.

Use a damp cloth to remove dirt and dust from the surface of the unit. Never use corrosive

elements or chemicals to clean this product.

When the product is not in use, store the unit in a dry place out of direct sunlight.

•

USE & OPERATION (CONTINUED)

WARNING:

Before cleaning the unit, switch the unit OFF and disconnect the power adapter from the unit and

electrical socket.

CLEANING THE CARBON DUST FILTER* AND HONEYCOMB COOLING MEDIA

The appliance is supplied with a Carbon Dust Filter* and Honeycomb Cooling Media.

The Carbon Dust Filter* and Honeycomb Cooling Media are located inside the Rear Grill. See

Figure 1 for instructions on how to remove them from the unit for cleaning and maintenance.

Do not run the unit in COOL mode with stale water in the tank. You must empty the water tank

and reﬁll with fresh water, especially if the tank has not been cleaned in a long time.

The cleaning frequency for the Honeycomb media depends on local air and water conditions.

In areas where the mineral content of water is high, mineral deposits may build up on the

Honeycomb Cooling Media and restrict air ﬂow. Draining the water tank and reﬁlling with fresh

water at least once a week will help reduce mineral deposits. If mineral deposits remain on the

Honeycomb Cooling Media, the media should be removed and washed under fresh water. The

media should be cleaned every two months or sooner, depending on your needs.

For best results allow the Honeycomb Cooling Media to dry after each use by turning off the cool

function 15 minutes before turning the unit off.

•

Carefully remove the rear grill from the unit.

Remove the two band holders to release the

carbon dust ﬁlter*.

Rinse the filter with clean water and let it dry

before re-installing to the rear grill.

Pull out the Honeycomb Cooling Media. Slide

down and remove the Honeycomb Frame.

Replace or clean media with water and a damp

cloth as needed.

Removing the Carbon Dust Filter*/ Honeycomb Cooling Media:

WARNING: DO NOT operate the Air Cooler when the

Rear Grill is removed from the Air Cooler, or if there

is a loose-fitting Rear Grill. Doing so can cause

serious injury or dangerous electrical shock.

*Applicable for models with Carbon Dust Filter only.

Figure 1:

Honeycomb

Frame

Honeycomb

Cooling Media Carbon Dust

Filter*

Band

Holder

Rear Grill

JMATEK Limited

Manulife Financial Centre,

Kwun Tong, Hong Kong

Phone: 852-2559-5522

Email: [email protected]

Web: www.jmatek.com

Made in China

The Honeywell Trademark is used under license

from Honeywell International Inc.

Honeywell International Inc. makes no

representations or warranties with respect to this product.

This product is manufactured by Airtek Int'l Corp. Ltd.

(subsidiary of JMATEK Ltd.).

Otros manuales para ES800

Tabla de contenidos

Otros manuales de Acondicionador de aire de Honeywell

Honeywell

Honeywell CL610PE Manual de usuario

Honeywell

Honeywell CS10XE Series Manual de usuario

Honeywell

Honeywell HC09CESAWK Manual de usuario

Honeywell

Honeywell MF08CESWW Manual de usuario

Honeywell

Honeywell TC10PE Manual de usuario

Honeywell

Honeywell MM14CCS Manual de usuario

Honeywell

Honeywell HF8CESWK5 Manual de usuario

Honeywell

Honeywell TC30PE Series Manual de usuario

Honeywell

Honeywell CS10XE Series Manual de usuario

Honeywell

Honeywell C060Pm Manual de usuario

Honeywell

Honeywell CL201AE Manual de usuario

Honeywell

Honeywell HL10CESWW Manual de usuario

Honeywell

Honeywell HL12CES Series Manual de usuario

Honeywell

Honeywell CO60PM Series Manual de usuario

Honeywell

Honeywell MN series IM Manual de usuario

Honeywell

Honeywell MP10CESWW Manual de usuario

Honeywell

Honeywell CL70PE Manual de usuario

Honeywell

Honeywell CL60PM Series Manual de usuario

Honeywell

Honeywell CL30XC Manual de usuario

Honeywell

Honeywell CO48PM Manual de usuario

Honeywell

Honeywell MM14CCS Manual de usuario

Honeywell

Honeywell CL30XC Manual de usuario

Honeywell

Honeywell MP08 Series Manual de usuario

Honeywell

Honeywell DLC203AE Series Manual de usuario

Manuales populares de Acondicionador de aire de otras marcas

Spheros

Spheros CC 355 Manual de usuario

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE Manual de usuario

Panasonic

Panasonic CS-E12HKEW Manual de usuario

nedis

nedis ACMB1WT7 Manual de usuario

Samsung

Samsung AR KV Series Guía

Daikin

Daikin FCFV50A Manual de usuario

Fujitsu

Fujitsu Inverter ASBA30JFC Manual de usuario

Toshiba

Toshiba RAS-M10SMUV-E Manual de usuario

Daikin

Daikin FXLQ20MAVE Manual de usuario

Hitachi

Hitachi RAS-E24CAK Manual de usuario

CIAT

CIAT Magister 2 Series Guía

Bestron

Bestron AAC6000 Manual de usuario

Hisense

Hisense 7K Manual técnico

Frigidaire

Frigidaire FFRE0533S1E0 Manual de usuario

Samsung

Samsung AS09HM3N Manual de usuario

Frigidaire

Frigidaire CRA073PU11 Manual del propietario

Soleus Air

Soleus Air GB-PAC-08E4 Manual de usuario

McQuay

McQuay MCK020A Manual de usuario