Honeywell CL603AE Manual de usuario

www.honeywellhomecomfort.com

E-mail: info@honeywellhomecomfort.com

Portable Evaporative Air Cooler

User Manual

Read and save these instructions before use

Enfriador de Aire Evaporativo Portátil

Manual de Instrucciones

Lea y guarde estas instrucciones antes de usar la unidad

Model / Modelo:

CL603AE

PARTS DESCRIPTION

1) Control Panel 7) Water Level Indicator

2) Handle 8) Remote Control

3) Louvers 9) Water Fill Door

4) Power Cord & Plug 10) Continous Water Supply

5) Casters 11) Drain Plug

6) Ice Compartment Lid

SPEED TIMER

MODE

SWING

High

Med

Low

Sleep

Cool

8hr 7hr

6hr

5hr

4hr

3hr

2hr

1hr

POWER

USE & OPERATION

CONTROL PANEL

FUNCTION BUTTONS

POWER

Press the POWER button to turn the unit on. The cooler will start automatically at medium speed.

After a few seconds the speed will switch to low. To turn the unit off, press the button again.

SPEED

Press the SPEED button repeatedly to change the speed between High - Mid - Low - Sleep.

The indicator light will show the selected speed:

TIMER

Press the TIMER button until the desired time duration setting is selected. When the set time

has passed, the unit will automatically turn off (unit remains in Standby mode until power cord is

unplugged from electrical socket). The TIMER function allows you to program the unit for up to 8

hours of use.

SWING

Press the SWING button until the SWING indicator light is illuminated on

the control panel. The louvers will begin to move left to right automatically.

Vertical Air Flow - You can manually adjust the louvers to change vertical

air ﬂow.

High (High) Medium (Med) Sleep (Sleep)Low (Low)

When the Sleep mode is selected, the fan will randomly change between High, Medium, Low and off (5

seconds each) to mimic a natural breeze.

LOUVER

MOVEMENT

USE & OPERATION (CONTINUED)

FUNCTION BUTTONS (CONTINUED)

MODE (COOL)

Press the MODE button to select COOL mode. Pressing the MODE button until COOL is illuminated

on the control panel activates evaporative cooling. The water pump will operate and you will feel the

cooler air after the Honeycomb Cooling Media is completely wet.

Pressing the MODE button again will deactivate COOL light on the control panel, switching off both

evaporative cooling function altogether.

Note: When the cooling function is switched OFF, the unit can still function in a fan only mode

(without evaporative cooling).

In cooling mode, Honeywell Air Coolers provide cool, moist air through the evaporation of water.

There is a manual Water Regulator knob located in the ice compartment of the unit. This allows you

to adjust the amount of water pumped over the Honeycomb Cooling Media, thus helping to control

cooling and humidiﬁcation levels.

When the Water Regulator is set to MIN, the water pump distributes a

minimal amount of water to the Honeycomb Cooling Media. This

results in less water evaporation and reduces the cooling effect.

When the Water Regulator is set to MAX, the water pump distributes

the maximum amount of water to the Honeycomb Cooling Media. This

results in maximum water evaporation and the cooling performance

improves.

ROOM COOLING AND HUMIDIFYING

Water Regulator

MAX

MIN

USE & OPERATION (CONTINUED)

NOTE:

REMOTE CONTROL

TIMER

SPEED

SWING

ON/OFF

MODE

POWER :

ON / OFF

High / Medium / Low / Sleep

Switch the COOL function

Controls the motion of the louvers

Controls the Timer function for automatic off

SPEED

MODE

TIMER

SWING

•

The remote control requires AAA (2 x 1.5V) batteries for replacement.

Open the battery compartment at the back of the remote control and insert the batteries inside.

Care must be taken to insert the batteries according to the correct polarity (+ / –) markings

shown inside the battery compartment.

Always point the remote control signal transmitter towards the unit when operating. Make sure

that the signal path is not obstructed.

Remove the batteries if the unit is not going to be used for an extended period of time.

Do not drop the remote control.

Do not mix different types of batteries such as alkaline, carbon-zinc, or rechargeable batteries.

Do not mix old and new batteries.

Do not recharge the battery.

Exhausted batteries are to be removed from the product and safely disposed of as per local

regulations.

Do not dispose of batteries in ﬁre. Batteries may explode or leak.

WARNING: Caution for ingestion of the small battery. Keep away from children and animals.

USE & OPERATION (CONTINUED)

It is ideal to use the Continuous Water Supply Connection to run the unit for long periods of time

without refilling the tank. This also helps prevent pump failure in case the cooler is running with

inadequate water in the tank.

CAUTION: Unplug the unit from the electrical socket before emptying or refilling the water tank.

Open the Water Fill Door located on the side of the unit.

Continuous Water Supply Connection:

For a continuous water supply, you will need a garden hose that is connected to a mains water supply.

FILLING WITH WATER

Make sure to position the air cooler correctly before you set up and start using the product. Please

refer to the COOLER LOCATION section of the separate Safety & Maintenance Guide.

COOLER LOCATION

Locate the male connector at one end of the garden hose. Insert the

garden hose connector into the water inlet valve of the cooler. Screw

and tighten the water inlet valve onto the threaded part of the garden

hose connector, making sure the hose connector is secured to

ensure there will be no leaks. If there is a leakage, the hose and the

water inlet valve may not be connected properly. Try to disconnect,

replace and tighten the water inlet valve again.

When the connection is secured, turn ON the water supply and the

water will ﬂow into the water tank of the cooler.

The cooler is now set so the water refills automatically when the

water tank is empty, or when the water reaches below a minimum

level.

When the water tank is full of water, the water inlet valve will

auto-matically stop the water supply from overflowing the water

tank.

WARNING: The maximum water inlet pressure is 0.5 MPa.

•

Water

Fill Door

Water inlet valve

Garden Hose

USE & OPERATION (CONTINUED)

The Water Level Indicator is located at the front of the unit. Refill the

water tank when water level is low. Do not fill water above the "Max."

water level mark to avoid water droplets collecting on the louvers. Check

the water level in the tank before running the COOL function. Make

sure there is water in the tank by using the continuous water supply

connection or by filling the tank up to the maximum indicator level.

Running the unit in COOL mode with inadequate water may cause

pump failure.

Note: The water capacity refers to the total volume of water that can be

contained within the air cooler water tank and water distribution system.

The water capacity in the tank at the “Max.” indicator level may be lower

than the actual water capacity of the air cooler.

Note: This unit does not have a mark indicating the minimum water level required.

Note: If ice is available, you may add ice in the top ice compartment to enhance the cooling

performance.

WARNING: Do not fill water tank with dirty water or salt water. This can damage the unit and

Honeycomb media.

FILLING WITH WATER (CONTINUED)

Ice Compartment

USE & OPERATION (CONTINUED)

Below are instructions on how to clean and maintain your air cooler. If the cooler will not be used for

a long period of time, please refer to the STORAGE & MAINTENANCE GUIDELINES located in the

separate Safety & Maintenance Guide.

WARNING:

Before cleaning the unit, switch the unit OFF and disconnect from the power outlet.

The unit is equipped with a low water sensor. In Cooling Mode, when water in the tank is below the

minimum level, you will hear a beeping sound and the indicator light will ﬂash continuously. The unit

will automatically pause evaporative cooling.

Reﬁll the water tank to deactivate the alarm in cooling mode. First switch OFF the unit and unplug

from the power outlet. Make sure there is water in the tank by using the continuous water supply

connection or by ﬁlling the tank up to the maximum indicator level. Plug in and switch ON again.

To deactivate the alarm and continue using the unit as a fan (without evaporative cooling), switch

the unit OFF and then ON again. The Low Water Alarm will not activate in Fan only mode. The Low

Water Alarm will sound again if the COOL function is activated while the water tank is still empty.

*Applicable for models with Low Water Alarm feature only.

LOW WATER ALARM*

Move the unit to a location where the water can be drained. Remove the cap from the Drain plug

located at the bottom of the unit. Allow the tank to empty.

Reﬁll the water tank with clean water and drain it completely.

Reﬁll the water tank with clean water, up to the maximum level.

Use a damp cloth to remove the dirt and dust from the surface of the unit. Never use corrosive

elements or chemicals to clean this product.

When the product is not in use, store the unit in a dry place out of direct sunlight.

•

CLEANING & DRAINING THE WATER TANK

USE & OPERATION (CONTINUED)

WARNING:

DO NOT operate the Air Cooler when the Rear Grill

or Rear Frame is removed from the Air Cooler, or

if there is a loose-fitting Rear Grill or Rear Frame.

Doing so can cause serious injury or dangerous

electrical shock.

*Applicable for models with Carbon Dust Filter only.

CLEANING THE CARBON DUST FILTER* AND HONEYCOMB COOLING MEDIA

The appliance is supplied with a Carbon Dust Filter* and Honeycomb Cooling Media.

The Carbon Dust Filter* and Honeycomb Cooling Media are located inside the Rear Grill. See

Figure 1 for instructions on how to remove them from the unit for cleaning and maintenance.

Do not run the unit in COOL mode with stale water in the tank. You must empty the water tank

and reﬁll with fresh water, especially if the tank has not been cleaned in a long time.

The cleaning frequency for the Honeycomb media depends on local air and water conditions. In areas

where the mineral content of water is high, mineral deposits may build up on the Honeycomb

Cooling Media and restrict air ﬂow. Draining the water tank and reﬁlling with fresh water at least

once a week will help reduce mineral deposits. If mineral deposits remain on the Honeycomb

Cooling Media, the media should be removed and washed under fresh water. The media should

be cleaned every two months or sooner, depending on your needs.

For best results allow the Honeycomb Cooling Media to dry after each use by turning off the cool

function 15 minutes before turning the unit off.

•

Carefully push down and pull out the rear grill

from the cooler.

Pull out the Carbon Dust Filter* and clean with

water as needed.

Remove all the screws from the Rear Frame and

carefully pull it off the air cooler.

To release the Honeycomb Media, remove the

screws securing the Honeycomb on the Rear

Frame and slide the Honeycomb out of the

frame.

Replace or clean media with water and a damp

cloth as needed.

Removing the Carbon Dust Filter*/ Honeycomb Cooling Media:

Figure 1:

Screws Carbon Dust

Filter

Honeycomb

Cooling Media

Rear Frame Rear Grill

JMATEK Limited

Manulife Financial Centre,

Kwun Tong, Hong Kong

Phone: 85225595522

Email: [email protected]

Web: www.jmatek.com

Made in China

The Honeywell Trademark is used under license

from Honeywell International Inc.

Honeywell International Inc. makes no

representations or warranties with respect to this product.

This product is manufactured by Airtek Int'l Corp. Ltd.

(subsidiary of JMATEK Ltd.).

Hecho en China

La marca Honeywell es usada bajo licencia de Honeywell

International Inc. Honeywell International Inc. no representa

ni garantiza este producto.

Este producto es fabricado por Airtek Int'l Corp. Ltd.

(subsidiaria de JMATEK Limited).

Model / Modelo:

CL603AE

Tabla de contenidos

Otros manuales de Acondicionador de aire de Honeywell

Honeywell

Honeywell HF08CESWK Manual de usuario

Honeywell

Honeywell CO301PC Manual de usuario

Honeywell

Honeywell HJ Series Manual de usuario

Honeywell

Honeywell CO25AE Manual de usuario

Honeywell

Honeywell MO Series Manual de usuario

Honeywell

Honeywell CL201AEWW Manual de usuario

Honeywell

Honeywell MF08 Series Manual de usuario

Honeywell

Honeywell CS10PE Manual de usuario

Honeywell

Honeywell CL401PM Manual de usuario

Honeywell

Honeywell MM Series Manual de usuario

Honeywell

Honeywell CS10XE Series Manual de usuario

Honeywell

Honeywell CL60PM Series Manual de usuario

Honeywell

Honeywell CS071AE Manual de usuario

Honeywell

Honeywell MN09 Series Manual de usuario

Honeywell

Honeywell CS08AM Manual de usuario

Honeywell

Honeywell R-MM14CHCSCS Manual de usuario

Honeywell

Honeywell HWAC-1217S Manual de usuario

Honeywell

Honeywell CL201AE Manual de usuario

Honeywell

Honeywell CL30XC Manual de usuario

Honeywell

Honeywell CO301PC Manual de usuario

Honeywell

Honeywell R-MM14CCS Manual de usuario

Honeywell

Honeywell CL60PM Series Manual de usuario

Honeywell

Honeywell CL20AE Manual de usuario

Honeywell

Honeywell MP09 Series Manual de usuario

Manuales populares de Acondicionador de aire de otras marcas

Spheros

Spheros CC 355 Manual de usuario

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE Manual de usuario

Panasonic

Panasonic CS-E12HKEW Manual de usuario

nedis

nedis ACMB1WT7 Manual de usuario

Samsung

Samsung AR KV Series Guía

Daikin

Daikin FCFV50A Manual de usuario

Fujitsu

Fujitsu Inverter ASBA30JFC Manual de usuario

Toshiba

Toshiba RAS-M10SMUV-E Manual de usuario

Daikin

Daikin FXLQ20MAVE Manual de usuario

Hitachi

Hitachi RAS-E24CAK Manual de usuario

CIAT

CIAT Magister 2 Series Guía

Bestron

Bestron AAC6000 Manual de usuario

Hisense

Hisense 7K Manual técnico

Frigidaire

Frigidaire FFRE0533S1E0 Manual de usuario

Samsung

Samsung AS09HM3N Manual de usuario

Frigidaire

Frigidaire CRA073PU11 Manual del propietario

Soleus Air

Soleus Air GB-PAC-08E4 Manual de usuario

McQuay

McQuay MCK020A Manual de usuario