Honeywell Q7055A Manual de usuario

Honeywell BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN

EN1B-0198GE51 R1004B

Q7055A

BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN

INSTALLATION INSTRUCTION & USER MANUAL

Quick Setup

In order to setup the BNA device properly,

the following connections are prerequisite:

•Null-Modem cable connected to a PC

running a VT100 terminal emulation

program or a VT100 compatible terminal

(refer to Table 6-1: Terminal settings)

•AN connection via UTP (RJ45 connec-

tor).

•Power connection.

•An active FTP-Server machine on the AN

The following BNA Bootloader commands

are mandatory for setting up the BNA (for a

detailed command description, refer to

chapter 6.5 Command Description on Page

31):

np Basic network parameters

dc Download configuration

load oad executable from FTP server

Before the application firmware is started it

is recommended to add some users (user

roles) using command um (refer to chapter

6.5.8 um - User management on Page 37)

After that, the BNA device can be installed

at its final operating location

BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN

EN1B-0198GE51 R1004B

Figure 1-1: Parts and Controls on the Front Side

Figure 1-2: Parts and Controls on the Rear Side

Technical Data

Supply Voltage 18-24 VAC (50 60 Hz);

18-24 VDC (external power

supply required)

Power Consumption 5VA (connected via 10BaseT,

twisted pair); 12VA

(connected via 10Base5)

Temperature Limits 0 +50 °C (+32 +122 °F);

5 95% rh, non condensing

Ambient storage limits: -35 +70 °C (-31 +160 °F);

5 95% rh, non condensing

System Data

Processor 25 MHz, MC68EN360, 32 Bit

Microprocessor (4 5MIPS)

Data Transfers 10Mbit/sec, 802 3 Ethernet

LAN-Interfaces 10BaseT (RJ45)

Field Bus (BNA-2DN) RS485 AC

coupled Manchester encoded

channels (L1-Bus compatible)

(BNA-2CS/1C) RS485 DC

coupled

Device Interface Serial RS232

Memory 4 MB SRAM, 2 MB Flash

MTBF >100 000 h

Weight 800 g (1 76 lb)

Dimensions (H x W x D) (76 x 158 x 200) mm

(2 99 x 6 2 x 7 87) in

Safety

Protection standard IP20 as per EN60529

Protection class II as per EN60730-1

Flame retardant V0 as per UL94

Agen y Listings

Electromagnetic compatibility (EMC) EN50081-1 and EN50082-2

Electromagnetic emission (EME) FCC Class A

Energy management UL916

Fire protection and smoke control UL864

BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN

EN1B-0198GE51 R1004B

Table of Contents

1 About BNA........................................................... 5

2 Lo ation of Parts and Controls.......................... 8

2 1 Front Side 8

2 2 Rear Side 11

3 Before Installation ............................................ 13

4 BNA Operating Positions ................................ 15

4 1 Single Device 15

4 2 Stacked Devices 16

4 3 Wall Mounting 16

5 Conne tions ....................................................... 19

5 1 Power Connection 19

5 2 Field Bus Connection (Ch1 / Ch2) 20

5 3 Bus Termination Switch 20

5 4 L1 Bus Termination 22

6 BNA Bootloader ................................................ 23

6 1 Startup Behavior 23

6 2 Operating Modes 25

6 3 Switching the Operating Mode 25

6 4 Device Setup 28

6 5 Command Description 31

6.5.1 Help or ?32

6.5.2 np - Basic network parameters 32

6.5.3 dc - Download configuration 33

6.5.4 load - Load executable 36

6.5.5 ping - ping 36

6.5.6 ver - Show installed software 37

6.5.7 run - Execute installed software 37

6.5.8 um - User management 37

6.5.9 whoami - Who am I 40

6.5.10 login - Login as different user 40

BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN

4 EN1B-0198GE51 R1004B

7 Cables and Conne tors..................................... 42

7 1 DB9F Null Modem Cable 42

7 2 Ethernet Connectors 44

7 2 1 RJ45 Connector 45

7 2 1 1 Connecting a BNA to a Hub 45

7 2 1 2 Connecting a BNA to a Workstation 46

Tips & Tri ks ............................................................ 48

FAQs........................................................................... 49

Glossary..................................................................... 50

BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN

EN1B-0198GE51 R1004B 5

1 About BNA

XCL5010

BNA-1C BNA-2CS BNA-2DN

S-Bus

F&S Bus

L1 Bus

Honeywell

XBS

TCP/IP LAN

The Building Network Adapter (BNA) delivers ex-

ceptional price/performance to meet the require-

ments of both building owners and service pro-

viders With its combination of scalable per-

formance, density, and low per-port pricing, the

Building Network Adapter allows network-layer

capabilities to be extended to a much wider range

of network configurations and environments

Customers can now gain the advantages of high-

performance network and services, including traffic

management to more locations throughout the

network

The Building Network Adapter uses the LAN-con-

nection to provide seamless communication to the

BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN

6 EN1B-0198GE51 R1004B

requesting device Status information like AN

communication activity, field bus traffic communication,

and system heartbeat of the Building Network

Adapter is indicated by LEDs on the front

Technically, the Building Network Adapter pro-

vides an interface from various Honeywell con-

troller busses that use RS232/RS485 signals to a

local area network using 802 3 Ethernet protocol

This allows data to be used by high-level building

management systems such as Enterprise Buildings

Integrator (EBI), Excel Building Supervisor (XBS),

and Excel Facility Integrator (XFI)

This Installation Instruction and User Manual covers

all of the BNA device types listed below

BNA-1C provides a single RS485 DC coupled C-

Bus-compatible communication chan-

nel for XL5000 family devices with up

to 76 8 kbps

BNA-2CS provides two RS485 DC coupled C- / S-

/ FS-90-Bus compatible communica-

tion channels for different applications,

like Excel IRC and Excel Classic as well

as XL5000 family devices with up to

76 8 kbps

BNA-2DN provides two RS485 AC coupled Man-

chester encoded L1-Bus (DeltaNet Peer

bus) compatible communication

channels

BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN

EN1B-0198GE51 R1004B 7

Additionally, each BNA type is equipped with a

RJ45 10Base T connector plus an RS232 interface

BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN

8 EN1B-0198GE51 R1004B

2 Location of Parts and Controls

The numbering for the parts and controls in this

section refers to the pictures on the rear side of the

title page In order to have a reference between the

numbering here and the device pictures, it is

possible to fold this page out

2.1 Front Side

Differences between the various BNA types are

explicitly noted in the corresponding element

description

1Reset

Hardware reset button Located directly behind

the small hole in the front panel To reach this

button, a pointed object like a sharp pen or an

unfolded paper clip is necessary Pressing this

button resets the BNA device immediately This

operation is similar to "power on" with the

BNA device

2Mode

Mode switch button This button is needed to

change the bootloader modes For a detailed

description about BNA operation modes, please

refer to chapter 6.2 Operating Modes on Page 25

3LAN

Local Area Network (LAN) activity display

BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN

EN1B-0198GE51 R1004B 9

Shows the actual LAN traffic using 4 LEDs

Col Collision indicator (Red) If this LED is

on, then two or more devices on the

network are transmitting at the same

time This is not a fault, but a normal

occurrence on an Ethernet network

However, when the Collision LED

remains on for all transmission attempts,

it may indicate an abnormal condition

such as an open end-of-line termination

Rx Receive indicator (Green) on means that

data is being received by the BNA over

the Ethernet

Tx Transmit indicator (Green) If this LED

is lit up, the BNA device is sending data

to the Ethernet When data is being

transmitted, the Rx indicator LED is lit

up simultaneously

Link indicator (Green) will always be lit

when the BNA is connected via the RJ45

connector to the Ethernet If this LED is

dark, it will not be possible to send or

receive any data

4Ch1

Bus Channel 1 activity display This display

contains two green LEDs, one showing BNA

BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN

10 EN1B-0198GE51 R1004B

reception activity (Rx) and the other showing

BNA transmission activity (Tx)

5Ch2

Bus Channel 2 activity display This display

contains two green LEDs, one showing BNA

reception activity (Rx) and the other showing

BNA transmission activity (Tx)

NOTE: Ch2 indi ation is available on two-

hannel devi es only. It is not available on a

BNA 1C devi e.

6Heartbeat

System heartbeat display During BNA system

runtime, this LED flashes continuously This

LED is a two-color LED A red flashing LED

means that the BNA bootloader is currently

active A green flashing LED means that an

application firmware is running

7Power

Power indicator This LED lights up when

power is connected to the BNA device

Otros manuales para Q7055A

Tabla de contenidos

Otros manuales de Adaptador de Honeywell

Honeywell

Honeywell OneWireless Adapter Manual de usuario

Honeywell

Honeywell OWA 100 OneWireless Manual de usuario

Honeywell

Honeywell Home C-Wire Adapter Manual de usuario

Honeywell

Honeywell Q7055A Manual

Honeywell

Honeywell ComfortPoint Open XFL5 Manual de usuario

Honeywell

Honeywell OWA 100 OneWireless Manual de usuario

Honeywell

Honeywell GENT RF-700 Manual de instrucciones

Honeywell

Honeywell OWA 100 OneWireless Manual de usuario

Honeywell

Honeywell Home C-Wire Adapter Manual de usuario

Honeywell

Honeywell DEX-BLE-1 Manual de usuario

Honeywell

Honeywell Q7800F Series Manual de usuario

Honeywell

Honeywell TC-RPFM01 Manual de usuario

Honeywell

Honeywell DC515 P2/BS Series Manual de usuario

Honeywell

Honeywell UC530 Manual de usuario

Honeywell

Honeywell Q7055C Series Manual de usuario

Honeywell

Honeywell DEX-BLE-10 Manual de usuario

Honeywell

Honeywell Limitless WLS Series Manual de usuario

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario