Homebase 572392 Manual de usuario

INSTRUCTION MANUAL

99CM LED SPUN

ACRYLIC TREE

IMPORTANT: Please read these instructions before using the product and retain for future use.

HHGL Limited, MK9 1BA; HHGL (ROI) Limited, D02 X576

Caution

• For indoor or outdoor use. Always place the plug into an indoor mains socket or a weatherproof outdoor socket.

• Always unwind the cord before use. Do not connect the product to the power supply whilst the product is still in the packaging.

• This light set is constructed with non-replaceable LED bulbs. DO NOT attempt to replace any of the LED bulbs in the light set.

• This product is intended for occasional decoration only; not to be used by children as a toy, and not intended for household illumination.

• It is normal for the transformer to run a little warm. Please ensure it's used in a well ventilated area.

• Keep away from sources of heat and naked ﬂames.

• Unplug when not in use.

• Always unplug from the mains supply whilst installing, carrying out maintenance or adjustments.

• The external ﬂexible cable or cord of this light set cannot be replaced; if the cord is damaged, the light set must be destroyed.

• Use only with the supplied transformer.

• When storing away, make sure the area is dry. Avoid any damp, wet and humid areas.

• Please read these instructions carefully. Keep these instructions in a safe place for future reference.

Product speciﬁcations

• Rated input: 32V AC Max. 3.6W

• Bulb rating: 3.2V 0.064W

• Transformer: JT-EL/FC32V3.6W-H6

Before you start

1. Study the ‘Caution’ section carefully.

2. Decide on an appropriate location for your product. Make sure that you have plenty of space, a level surface, and a clear dry area for

assembly, then locate. Always try to assemble the product as close as possible to the intended location.

3. Check the pack and make sure you have all of the parts.

4. Remove all plastic packaging material and dispose of them safely.

No. Parts list Qty

Upper part of tree

Lower part of tree

Ground stake

Power transformer

Assembly

Step 1 Step 2 Step 3

Connect the upper part of the tree (1)

to the lower part of the tree (2). Insert

the two iron wires at the bottom of the

upper part of the tree (1) into the nut

holes of the lower part of the tree (2).

Fasten together the upper part of the

tree (1) and the lower part of the tree (2).

Rotate the C buckle on the upper part

of the tree outwards, then press the

wire under the tree to tighten it.

Assembly complete. If you

position outdoors, please use

the stakes (3) provided and ﬁx

them into the ground.

Parts list

76cm

99cm

20cm

Assembled dimensions

Operating instructions

1. Unpack the product from the box.

to be collected and recycled at end of life. Users of

separate collection facilities available.

aged to minimise any potential effects on the

Disposal and recycling

Electrical products are labelled with the wheelie bin symbol to indicate that they are

electrical products should not dispose of them as unsorted municipal waste but use the

Check with your local authority for recycling advice. Customer participation is encour

environment and human health from the potential presence of hazardous substances.

Care and use

Disassembly and storage

Before using or re-using the silhouette light, inspect the arp points, please disposeproduct carefully. If there are any damaged parts or exposed sh

of the silhouette light.

amage:

shut.

Before storage, please repack the product as follows to avoid d

1. Gently lift off each section of the silhouette light.

2. Carefully place the silhouette light in its box and tape it

3. STORE PRODUCT IN A COOL AND DRY LOCATION. AWAY FROM SUNLIGHT AND WHERE THE TEMPERATURE DOES NOT EXCEED 40 C.

3. Connect the power transformer to the product, then plug the power transformer into the mains socket.

4. Press the button on the transformer sequentially to switch between the lighting modes below:

- Combination

- Waves

- Sequential

- Slow glow

- Chasing/ﬂash

- Slow fade

- Twinkle/ﬂash

- Steady on

3. Unplug the power transformer when not in use.

2. Choose a location to position the product. Please ensure it's stable, then use the stakes provided to secure it in place.

Otros manuales de Pino artificial de Homebase

Homebase

Homebase 570605 Manual de usuario

Homebase

Homebase 568883 Manual de usuario

Homebase

Homebase 7FT DERRY SPRUCE PREMIUM TREE Manual de usuario

Homebase

Homebase 7FT 6IN GLITTER TIPPED PREMIUM TREE Manual de usuario

Homebase

Homebase 7FT VERSAILLES PREMIUM TREE Manual de usuario

Homebase

Homebase 6FT Norway Spruce Manual de usuario

Homebase

Homebase 572818 Manual de usuario

Manuales populares de Pino artificial de otras marcas

Trim a Home

Trim a Home TY-S6-250L Manual de usuario

Polygroup

Polygroup TG7600NVQC03 Manual de usuario

Sears

Sears Donner & Blitzen M44814 Manual de usuario

BETHLEHEM LIGHTING

BETHLEHEM LIGHTING 6.5’ Tinsel Tree Manual de usuario

Home Accents Holiday

Home Accents Holiday TG76P3D93L08 Manual de usuario

Polygroup

Polygroup TG76M3S45C02 Manual de usuario

Polygroup

Polygroup TG90P3693L00 Manual de usuario

Costway

Costway CM23595US Manual de usuario

Polygroup

Polygroup TV46M3ADVC05 Manual de usuario

Home Accents Holiday

Home Accents Holiday TG76P4C15D03 Manual de usuario

Polygroup

Polygroup TV46P7001X00 Manual de usuario

Holiday Living

Holiday Living TV40EH339C01 Manual de usuario

Polygroup

Polygroup TGC000NY1C00 Manual de usuario

CASARIA

CASARIA DBGB001 Manual de usuario

Alpine

Alpine CRD100L-WT Manual de usuario

Home Accents Holiday

Home Accents Holiday TG76M3W89C00 Manual de usuario

CASARIA

CASARIA 104006 Manual de usuario

Polygroup

Polygroup TG70P3D94D00 Manual de usuario