Home Decorators Collection MAKENNA 56235 Manual de usuario

THANK YOU

We appreciate the trust and condence you have placed in Home Decorators Collection through the purchase of this ceiling fan. We strive

to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home

improvement needs. Thank you for choosing Home Decorators Collection!

Item #1008 271 600

Model #56235

UL Model #52-MAKN

USE AND CARE GUIDE

MAKENNA 52-INCH CEILING FAN

To view an instructional video on how to install this product:

1. Go to www.homedepot.com and enter either the Item or Model number, found in the top

right corner of the cover of this instruction manual, in the search eld.

2. Click on your product from the list of search results and click on the video link in the

“Product Overview” section.

Questions, problems, missing parts? Before returning to the store,

call Hubspace Customer Service

8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday

1-877-592-5233

HOMEDEPOT.COM/HUBSPACE

Table of Contents ................................................................ 2

Safety Information...............................................................2

Warranty ...............................................................................3

Pre-Installation ....................................................................3

Installation............................................................................6

Assembly..............................................................................7

Operation ...........................................................................13

Care and Cleaning.............................................................17

Troubleshooting.................................................................17

1. To reduce the risk of electric shock, ensure the electricity has been

turned off at the circuit breaker or fuse box before you begin.

2. All wiring must be in accordance with the National Electrical Code

ANSI/NFPA 70 and local electrical codes. Electrical installation should

be performed by a qualied licensed electrician.

3. The outlet box and support structure must be securely mounted and

capable of reliably supporting a minimum of 35 lb (15.9 kg). Use

only UL Listed outlet boxes marked “Acceptable for Fan Support of

35 lb (15.9 kg) or less.”

4. Do not place objects in the path of the blades.

5. To avoid personal injury or damage to the fan and other items, use

caution when working around or cleaning the fan.

6. After making electrical connections, spliced conductors should be

turned upward and pushed carefully up into the outlet box. The

wires should be spread apart with the grounded conductor and the

equipment-grounding conductor on one side of the outlet box.

7. All set screws must be checked and retightened where

necessary before installation.

WARNING: To reduce the risk of personal injury, do

not bend the blade brackets (also referred to as

anges) during assembly or after installation. Do

not insert objects in the path of the blades.

WARNING: Electrical diagrams are for reference

only. If you are using a light kit, refer to the light kit

instructions manual to make the electrical

connections. Optional use of any light kit shall be

UL Listed and marked suitable for use with this fan.

WARNING: To avoid possible electrical shock, turn

the electricity off at the main fuse box before

wiring. If you feel you do not have enough electrical

wiring knowledge or experience, contact a licensed

electrician.

Safety Information

Table of Contents

CAUTION: To reduce the risk of personal injury,

use only the screws provided with the outlet box.

WARNING: To reduce the risk of re, electric shock

or personal injury, mount to outlet box marked

“Acceptable for fan support of 35 lb (15.9 kg) or

less”, and use screws provided with the outlet box.

READ AND SAVE THESE INSTRUCTIONS.

WARNING: To reduce the risk of re or electric

shock, this fan should only be used with fan speed

control part no. MR225A, manufactured by Chungear

Industrial Co., Ltd.

CAUTION: Do NOT use this fan with a dimmer switch

or wall control. Using a dimmer switch or wall

control will damage the fan.

CAUTION: Changes or modications not expressly

approved by the party responsible for compliance

could void the user’s authority to operate the

equipment.

WARNING: To reduce the risk of re or electric

shock, do not use this fan with any solid-state

speed control device.

CAUTION: The fan must be mounted with a minimum

of 7 ft. (2.1 m) of clearance from the trailing edge of

the blades to the oor.

3HOMEDEPOT.COM/HUBSPACE

Please contact 1-877-592-5233 for further assistance.

Pre-Installation

Warranty

SPECIFICATIONS

NOTE: These are approximate measures. They do not

include the amps and wattage used by the light kit.

Size Speed Volts

Fan Power

Consumption

(without lights)

WATT

Airow

CFM

Airow Efciency

(higher is better)

CFM/WATT

Net

Weight

Gross

Weight Cubic Feet

52 in.

Low

120

9 1431 159

20.28 lb

(9.2 kg)

26.39 lb

(11.97 kg) 2.0 cu. ft.

Medium 30 2887 96

High 61 4521 74

TOOLS REQUIRED

Phillips

screwdriver

Flat blade

screwdriver

Adjustable

wrench

Electrical

tape

Wire

cutter/

stripper

Step ladder

The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a

lifetime after the date of purchase by the original purchaser. The supplier warrants that the light kit, excluding any glass, to be free from defects in

workmanship and material at the time of shipment from the factory for a period of ve years after the date of purchase by the original purchaser.

The supplier also warrants that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the

time of shipment from the factory for a period of two years after the date of purchase by the original purchaser. We agree to correct such defects

without charge or at our option replace with a comparable or superior model if the product is returned. To obtain warranty service, you must present

a copy of the receipt as proof of purchase. All costs of removing and reinstalling the product are your responsibility. Damage to any part, such as by

accident, misuse, improper installation, or by afxing any accessories, is not covered by this warranty. Because of varying climatic conditions this

warranty does not cover any changes in brass nish, including rusting, pitting, corroding, tarnishing, or peeling. Brass nishes of this type give their

longest useful life when protected from varying weather conditions. A certain amount of “wobble” is normal and should not be considered a defect.

Servicing performed by unauthorized persons shall render the warranty invalid. There is no other express warranty. Interline hereby disclaims any

and all warranties, including but not limited to those of merchantability and tness for a particular purpose to the extent permitted by law. The

duration of any implied warranty which cannot be disclaimed is limited to the time period as specied in the express warranty. Some states do not

allow a limitation on how long an implied warranty lasts, so the above limitation may not apply to you. The retailer shall not be liable for incidental,

consequential, or special damages arising out of or in connection with product use or performance except as may otherwise be accorded by law.

Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This

warranty gives specic legal rights, and you may also have other rights which vary from state to state.This warranty supersedes all prior warranties.

Shipping costs for any return of product as part of a claim on the warranty must be paid by the customer.

Contact the Customer Service Team at 1-877-592-5233 or visit www.HomeDepot.com/hubspace.

Part Description Quantity

AA Blade attachment screws 19

BB Plastic wire connecting nut 3

CC Blade arm screws 13

DD Decorative frame screws 13

EE Frame brace screws 7

Pre-Installation (continued)

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

AA BB

5HOMEDEPOT.COM/HUBSPACE

Please contact 1-877-592-5233 for further assistance.

Part Description Quantity

A Mounting plate 1

B Trim ring 1

C Fan motor assembly 1

D Blade arm 6

E Blade 6

F Blade arm bracket 6

Part Description Quantity

G Decorative frame piece 6

H Light kit pan 1

I Light kit assembly 1

J Light shade 1

K Receiver 1

L Remote control 1

M Battery 2

IMPORTANT: This product and/or components are governed by

one or more of the following U.S. Patents: 5,947,436; 5,988,580;

6,010,110; 6,046,416; 6,210,117 and other patents pending.

Pre-Installation (continued)

PACKAGE CONTENTS

1 2 34

ONDIP

Installation

MOUNTING OPTIONS

WARNING: To reduce the risk of re, electric shock or

personal injury, mount to outlet box marked “Acceptable

for fan support of 35 lb (15.9 kg) or less”, and use

screws provided with the outlet box. An outlet box

commonly used for the support of lighting xtures may

not be acceptable for fan support and may need to be

replaced. If in doubt, consult a qualied electrician.

If your ceiling fan does not have an existing UL Listed mounting

box, then install one using the following instructions:

□Disconnect the power by removing the fuses or turning off

the circuit breakers.

□Secure the outlet box directly to the building structure. Use

the appropriate fasteners and materials. The outlet box and

support structure must be securely mounted and capable of

reliably supporting a minimum of 35 lb (15.9 kg). Use only UL

Listed outlet boxes marked “Acceptable for fan support of

35 lb (15.9 kg) or less.” Do not use a plastic outlet box.

The illustrations below show three different ways to mount the

outlet box.

To hang your fan where there is an existing xture but no ceiling joist,

you may need an installation hanger bar as shown above (available at

any Home Depot store).

Outlet Box

Hanger Bar

7HOMEDEPOT.COM/HUBSPACE

Please contact 1-877-592-5233 for further assistance.

Assembly - Hanging the Fan

Attaching the fan to the electrical box

1□Turn the power off.

□Loosen the two mounting screws (GG) supplied with the outlet

box, but do not remove the screws.

□Securely attach the mounting plate (A) to the outlet box by

sliding the mounting plate (A) over the two mounting screws

(GG) supplied with the outlet box.

□Pull the 120-volt supply wires (the black, white and ground

wires) out of the outlet box (FF) and through the hole in the

mounting plate (A) and lay them to the side.

Hanging the fan motor assembly

2□Attach the trim ring (B) to the fan motor assembly (C) at the

opening of the motor housing. Make sure the slots of trim ring

(B) are on top.

□Carefully lift the fan motor assembly (C) and hang the fan motor

assembly (C) on the hook of the mounting plate (A) by utilizing

one of the holes at the outer rim of the motor housing so that it

is securely suspended.

□Connect the wiring to your fan according to step 3 “Making the

Electrical Connections”.

Assembly - Hanging the Fan (continued)

Installing the receiver

Making the electrical connections

□Spread the wires apart so that the green and whites are one

side of the outlet box and the black wire is on the other side.

□Connect the green fan wires to the household ground wire (this

may be a green or bare wire) using a wire connecting nut (BB).

□Connect the receiver (K) red or black wire to the household

black (hot) wire using a wire connecting nut (BB).

□Connect the receiver (K) white wire to the household white

(neutral) wire using a wire connecting nut (BB).

□Secure each wire connecting nut using electrical tape.

□Wire the receiver (K) to the fan wires by connecting the molded

adaptor plug from receiver (K) with molded adaptor of the fan

motor assembly (C) together.

□Push the receiver (K) into the bracket on the mounting plate (A)

as shown, at side towards the ceiling.

WARNING: Each wire nut supplied with this fan is

designed to accept up to one 12-gauge house wire

and two wires from the fan. If you have larger than

12-gauge house wiring or more than one house wire

to connect to the fan wiring, consult an electrician for

the proper size wire nuts to use.

IMPORTANT: Use the wire connecting nuts (BB)

supplied with your fan. Secure the connectors with

electrical tape and ensure there are no loose strands or

connections.

WARNING: To reduce the risk of re or electrical

shock, remember to disconnect power. The electrical

wiring must meet all local and national electrical code

requirements. The electrical source and fan must

be 110/120 volt, 60HZ. Do not use this product in

conjunction with any variable wall control. Incorrect

wire connection can damage this receiver.

CAUTION: If other fan wires are different color, have this

unit installed by a licensed electrician.

CAUTION: Do not install the receiver (K) in a damp

location or immerse in water. For indoor use only. Do

not pull on or cut the receiver leads shorter. Do not

drop or bump the unit.

Outlet box

Green or bare wire

Red or

Black

White

9HOMEDEPOT.COM/HUBSPACE

Please contact 1-877-592-5233 for further assistance.

Assembly - Hanging the Fan (continued)

Installing the motor assembly

□Remove two of the four screws (located diagonally from each

other) (NN) from the top of the mounting plate (A) and loosen

the other two screws (NN).

□Align the two key slots in the top of the fan motor assembly (C)

with the two loosened screws (NN) on the mounting plate (A).

Push the fan motor assembly (C) up and turn it clockwise to

lock in the mounting plate (A). Tighten the two screws.

□Install the two screws that were removed at the beginning

of this step into the remaining two holes and tighten the four

screws rmly.

□Install the trim ring (B) by aligning the ring’s slots with the

screws on the mounting plate (A). Rotate the ring clockwise to

lock in place.

NOTE: For better performance with the WiFi system, the

WiFi antenna must be mounted to the ceiling outside of

the fan’s ceiling housing.

Assembly - Attaching the Blades

Attaching the blades to

the blade arm

□Attach a blade (E) to the blade arm (D) by aligning the holes

on the blade arm bracket (F) with the holes on blades (E) and

blade arms (D), inserting the screws (AA) into the holes in the

blade arm (D) and through the blade (E), blade arm (D) and

blade arm bracket (F).

□Tighten each screw to secure the blade (E).

□Repeat this step for each blade (E), blade arm (D) and blade

arm bracket (F).

Attaching the blade assemblies

to the motor

□Attach the blade assembly to the motor assembly (C) by aligning

the screw holes on the blade arm (D) with the screw holes on the

bottom of the fan motor assembly (C).

□Insert the screws (CC) into the holes on the blade arm (D) and

through the holes on the bottom of the fan motor assembly (C).

Do not completely tighten these screws. The blade arms should

be slightly loose when attaching the decorative frames.

□Repeat this process for remaining blade assemblies.

WiFi antenna mount

outside of the housing

View after installation

Assembly - Attaching the Blades (continued)

Assembling the decorative frame

□Attach the decorative frame (G) to the blade assembly by

aligning the two posts of the decorative frame with the two

holes in the blade. Secure the decorative frame to the blade

using the decorative frame screws (DD). Insert the decorative

frame screws (DD) through the two holes in the blade arm (D)

and screw them into the posts of the decorative frame (G).

Align the hole in the tab at the end of the decorative frame (G)

with the frame brace on the side edge of the blade arm (D) and

secure using a frame brace screw (EE). Make sure all screws

are completely tightened.

□Repeat this process for the remaining decorative frame

pieces (G).

□Once all of the decorative frame pieces are installed,

completely tighten all of the blade arm screws (CC) to secure

the blade assemblies to the fan.

Assembly - Attaching the Light Kit

Installing the light kit pan

□Remove one screw (HH) from the black bracket below the fan

motor assembly (C), and loosen but do not remove the other

two screws.

□Push the light kit pan (H) up to the fan motor assembly (C) so

that the two loosened screw heads t into the keyhole slots.

Turn the light kit pan (H) clockwise.

□Re-install the screw (HH) that was removed in the rst step.

□Make sure all the screws are rmly tightened.

HHH

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Admirador de Home Decorators Collection

Home Decorators Collection

Home Decorators Collection CASUN 11252AIWNCN Manual de usuario

Home Decorators Collection

Home Decorators Collection KENSGROVE YG493A-BN Manual de usuario

Home Decorators Collection

Home Decorators Collection KENSGROVE YG493ODC-MBK Manual de usuario

Home Decorators Collection

Home Decorators Collection STONEMILL LED Manual de usuario

Home Decorators Collection

Home Decorators Collection ASHBY PARK 59600 Manual de usuario

Home Decorators Collection

Home Decorators Collection 56049 Manual de usuario

Home Decorators Collection

Home Decorators Collection COLEMONT 51820 Manual de usuario

Home Decorators Collection

Home Decorators Collection 7982HDCBN Manual de usuario

Home Decorators Collection

Home Decorators Collection CORINTH Manual de usuario

Home Decorators Collection

Home Decorators Collection WINDWARD 68000 Manual de usuario

Home Decorators Collection

Home Decorators Collection YG545A-BN Manual de usuario

Home Decorators Collection

Home Decorators Collection CITYVIEW YG814-PN Manual de usuario

Home Decorators Collection

Home Decorators Collection PINE MEADOWS 52-ALLE Manual de usuario

Home Decorators Collection

Home Decorators Collection ALISIO Manual de usuario

Home Decorators Collection

Home Decorators Collection FOLSOM YG523-BN Manual de usuario

Home Decorators Collection

Home Decorators Collection 56006 Manual de usuario

Home Decorators Collection

Home Decorators Collection 91144 Manual de usuario

Home Decorators Collection

Home Decorators Collection ROYALTY AM590-BN Manual de usuario

Home Decorators Collection

Home Decorators Collection 52-PADA Manual de usuario

Home Decorators Collection

Home Decorators Collection TAHITI BREEZE Manual de usuario

Home Decorators Collection

Home Decorators Collection YG618-NI Manual de usuario

Home Decorators Collection

Home Decorators Collection CHAPLIN AM443-BN Manual de usuario

Home Decorators Collection

Home Decorators Collection HERALD AM429-BN Manual de usuario

Home Decorators Collection

Home Decorators Collection PINE MEADOWS Manual de usuario

Manuales populares de Admirador de otras marcas

ELTA FANS

ELTA FANS H03VV-F Manual de usuario

Hunter

Hunter 20714 Manual de instrucciones

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manual de usuario

Hunter

Hunter Caraway Manual de instrucciones

Panasonic

Panasonic FV-15NLFS1 Manual de usuario

Kompernass

Kompernass KH 1150 Manual de usuario

VES

VES FALA100/12V/TR Manual de usuario

Vertiv

Vertiv Liebert DCD Manual de usuario

Westinghouse

Westinghouse GFP Series Manual de usuario

Venmar

Venmar KUBIX HRV PLUS Series Manual de usuario

Maico

Maico ECR 31 Manual de usuario

Sonnenkonig

Sonnenkonig Dinky Manual de usuario

S&P

S&P ECOWATT HXBR Manual de usuario

Wider

Wider IMP03369BH Manual de usuario

Panasonic

Panasonic F-60DHN Manual de usuario

Hinkley

Hinkley HIGHLAND Manual de usuario

Broan

Broan 766BN Manual de usuario

Premium

Premium PFS16022 Instrucciones de montaje