Hitachi SH7760 Solution Engine2 Guía de instalación
SH7760 Solution Engine2
Overview
(MS7760CP01P)
1st Edition
Hitachi ULSI Systems Co., Ltd.
MS7760CP01P-M
[Notice]
1. The product described in this manual may be modified without prior notice for reliability, functionality or design
improvement.
2. Information contained in this manual is correct and reliable, but Hitachi ULSI Systems shall not be held responsible
for damage due to the use of information, product or circuit or infringement of property rights or other rights.
3. This manual does not grant users the property rights and other rights of the third party or Hitachi ULSI Systems.
4. No part of this manual may be transcribed or duplicated without the written permission of Hitachi ULSI Systems.
5. The appearance of the product shown in this manual may slightly differ from that of the actual product.
1
Notes on Using the MS7760CP01P
Thank you for your purchasingourMS7760CP01P board (simply called Solution Engine2 in this manual).
Read the following notesand cautions before using Solution Engine2.
Solution Engine2 Components
Confirm that the following components are all contained after unpacking.
Product model: MS7760CP01P
•Solution Engine2 main unit (CPU board, LCD board, debug board and I/O board)
•AC adapter
•RS-232C cable
•CD-ROM (Software, Solution Engine2 User’s Manual (This Manual))
•Big-endian monitor EPROM
•Software License Agreement
•User Registration Card
2
!
CAUTION
!
WARNING
!
CAUTION
Safety Instructions
•Read this page carefully and keep in mind the instructions before using T-Engine.
If ignored, there is a risk of death or heavy injury.
If ignored, there is a risk of injury or equipment damage.
•If smoke or abnormal smell arises from the board, stop using Solution Engine2, disconnect the AC adapter immediately
from the receptacle and turn off Solution Engine2.
•Don’t disassemble or modify Solution Engien2 to avoid a risk of high-voltage electric shock or fire.
•Don’t drop water or liquids onto Solution Engine2 to avoid a risk of electric shock or fire. When water or liquid is
dropped onto the board, disconnect the AC adapter immediately from the receptacle, and wipe it with a soft cloth to avoid a
risk of electric shock or fire.
•Don’t fall objects (line or solder scrap) onto Solution Engine2. If an object is dropped into it, disconnect the AC adapter
immediately from the receptacle, turn off Solution Emgine2, and remove the object from the inside of the board to avoid a
risk of electric shock or fire.
•Use a dedicated AC adapter that comes standard with Solution Engine2 to avoid a risk of electric shock, abnormal heat or
fire.
•Don’t use inflammable liquids (alcohol, benzine or thinner) for cleaning the board to avoid a risk of fire.
•Don’t place a heavy item on the AC adapter cord. To avoid a risk of electric leakage, fire or electric shock, don’t allow the
AC adapter cord to be damaged or modified.
•Don’t unplug the AC adapter cord with wet hand to avoid a risk of electric shock. When unplugging the cord, grasp and
pull the plug instead of the cord. Don't pull the AC adapter cord to avoid a risk of cord damage, electric shock or fire.
3
!
WARNING
•Don’t use the packaged AC adapter (that comes standard with Solution Engine2) for other equipment to avoid a risk of
electric shock, abnormal heat or fire.
•To power an external device from Solution Engine2's internal power supply, don’t supply a current over the permissible
level of each power supply. If the supplied current exceeds the permissible current level, there is a risk of electric shock,
abnormal heat or fire.
•When Solution Engine2 is powered and used for a long time, it may be heated up to a temperature of about 50ºC. Though
this is not a fault with Solution Engine2, there is a risk of low-temperature burn injury if skin touches it for a long time.
•Don’t use or store Solution Engine2 in a place subject to direct sunlight or near the heater to prevent Solution Engine2 from
being deformed due to heat.
•Don’t store Solution Engine2 in a dusty or humid place.
•Turn off the power before connecting cables or equipment. When this caution is ignored, a fault may occur with Solution
Engine2.
•When connecting the AC adapter to the receptacle, check the polarity and connection beforehand to avoid a risk of electric
shock, fire or fault.
•Don’t distribute or permit the use of Solution Engine2 to those who may use it for purposes that may disturb or threaten
international peace or security and don’t use it by yourself for malicious purposes. When exporting the purchased Solution
Engine2, observe the foreign exchange law and take appropriate action.
4
Guarantee
•The system is repaired for free within a period of guarantee (one year after delivery) so long as it is used under normal
conditions (normal environmental conditions, normal usage). The following lists the cases where Solution Engine2 must
be repaired for value regardless of the period of free guarantee.
- System malfunctions due to natural disasters.
- System modification by users
- System malfunction due to incorrect use
•Solution Engin2 is specifically designed to serve various evaluation purposes prior to product development. Don't
incorporate it into the product itself. We do not guarantee the performance of Solution Engine2 when used inside a product.
Others
•The product names in this manual are trademarks or registered trademarks of the respective manufacturers.
5
Table of Contents
Notes on Using the MS7760CP01P
1.System Configuration ………………………8
1.1 Solution Engine2 Features ………………………8
1.2 Solution Engine2 Configuration ………………………8
1.3 Solution Engine2 Appearance ………………………10
1.4 Solution Engine2 Specification ………………………14
2.Installation ………………………16
2.1 Host System Connection ………………………16
2.2 AC Adapter Connection ………………………18
2.3 Turning ON or OFF Solution Engine2 ………………………19
2.4 Using the Debug Board ………………………20
3.Description of Switches ………………………23
3.1 CPU Board Switch ………………………23
3.2 LCD Board Switch ………………………25
4.Memory Map ………………………26
4.1 Memory Map for T-Engine Only ………………………26
4.2 Memory Map during Debug Board Connection ………………………27
6
5.Function Blocks ………………………29
5.1 PCMCIA ………………………29
5.2 USB Host ………………………33
5.3 UART ………………………35
5.4 LCD ………………………38
5.5 Sound Generator ………………………42
5.6 SIM Card Interface ………………………45
6.Power Supply Controller ………………………48
6.1 Power Supply Controller Function ………………………48
6.2 Serial Communication between the SH7760 and Power Supply Controller ………………………49
6.3 RTC (Real-time Clock) Function ………………………55
6.4 Touch Panel Function ………………………65
6.5 Key Switch Control ………………………85
6.6 Power Supply Control ………………………93
6.7 LED Control ………………………95
6.8 LCD Front Light Control ………………………96
6.9 Reset Control ………………………97
6.10 Infrared Remote Control ………………………98
6.11 Serial EEPROM Control ………………………104
6.12 Electronic Volume Control ………………………106
6.13 Initial Values in thePower Supply Control Registers ………………………107
7
7. External Interrupts ………………………110
7.1 SH7760 External Interrupts ………………………110
8.Solution Engine2 Extension Slots ………………………111
8.1 Extension Slot Specifications ………………………111
8.2 Extension Slot Signals ………………………112
9.Daughter Board Design Guide ………………………113
9.1 Daughter Board Dimensions ………………………113
9.2 Daughter Board Power Supply ………………………113
9.3 Daughter Board Stack ………………………114
9.4 Daughter Board WAIT#Output ………………………114
9.5 Extension Slot AC Timing ………………………115
10. Monitor Program Usage ………………………117
10.1 Monitor Program Usage ………………………117
10.2 List of Monitor Program Fubctions ………………………126
10.3 Command Description ………………………127
Tabla de contenidos
Otros manuales de Placa madre de Hitachi
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
