Hitachi ZAXIS 110 Manual de instrucciones

Manual No. : KM-187E

Vol. No. : W187E-02

Workshop Manual

Excavator

PRINTED IN SINGAPORE (PS)

110 120 125US 135US 135UR Excavator Workshop Manual

110 125US

120 135US

135UR

Service Manual (Manual No. KM-187E) consists of the following three separate volumes;

Technical Manual (Operational Principle) :Vol. No. TO187E

Technical Manual (Troubleshooting) :Vol. No. TT187E

Workshop Manual :Vol. No. W187E

Zaxis110/120/125US/135UR-WSh 6/3/02, 11:09 AM1

epcatalogs.com

INTRODUCTION

IN-01

TO THE READER

• This manual is written for an experienced technician

to provide technical information needed to maintain

and repair this machine.

• Be sure to thoroughly read this manual for correct

product information and service procedures.

• If you have any questions or comments, at if you

found any errors regarding the contents of this

manual, please contact using “Service Manual

Revision Request Form at the end of this man-

ual.

(Note: Do not tear off the form. Copy it for us-

age.):

Publications Marketing & Product Support

Hitachi Construction Machinery Co. Ltd.

TEL: 81-298-32-7173

FAX: 81-298-31-1162

ADDITIONAL REFERENCES

• Please refer to the materials listed below in addition

to this manual.

• The Operator’s Manual

• The Parts Catalog

• Operation Manual of the Engine

• Parts Catalog of the Engine

• Hitachi Training Material

MANUAL COMPOSITION

• This manual consists of three portions: the Techni-

cal Manual (Operational Principle), the Technical

Manual (Troubleshooting) and the Workshop Man-

ual.

• Information included in the Technical Manual

(Operational Principle):

technical information needed for redeliver and

delivery, operation and activation of all devices

and systems.

• Information included in the Technical Manual

(Troubleshooting):

technical information needed for operational per-

formance tests, and troubleshooting procedures.

• Information included in the Workshop Manual:

technical information needed for maintenance

and repair of the machine, tools and devices

needed for maintenance and repair, maintenance

standards, and removal/installation and assem-

ble/disassemble procedures.

PAGE NUMBER

• Each page has a number, located on the center

lower part of the page, and each number contains

the following information:

Example : T 1-3-5

Consecutive Page Number for Each Group

Group Number

Section Number

T: Technical Manual W: Workshop Manual

epcatalogs.com

INTRODUCTION

IN-02

SAFETY ALERT SYMBOL AND HEADLINE

NOTATIONS

In this manual, the following safety alert symbol and

signal words are used to alert the reader to the

potential for personal injury of machine damage.

This is the safety alert symbol. When you see this

symbol, be alert to the potential for personal injury.

Never fail to follow the safety instructions prescribed

along with the safety alert symbol.

The safety alert symbol is also used to draw attention

to component/part weights.

To avoid injury and damage, be sure to use appropri-

ate lifting techniques and equipment when lifting heavy

parts.

• CAUTION:

Indicated potentially hazardous situation which

could, if not avoided, result in personal injury or

death.

• IMPORTANT:

Indicates a situation which, if not conformed to the

instructions, could result in damage to the machine.

• NOTE:

Indicates supplementary technical information or

know-how.

UNITS USED

• SI Units (International System of Units) are used in

this manual.

MKS system units and English units are also

indicated in parenthheses just behind SI units.

Example : 24.5 MPa (250 kgf/cm2, 3560 psi)

A table for conversion from SI units to other system

units is shown below for reference purposees.

Quantity To Convert

From Into Multiply By

Pressure MPa kgf/cm210.197

MPa psi 145.0

Power kW PS 1.360

kW HP 1.341

Temperature °C°F°C×1.8+32

Velocity km/h mph 0.6214

min-1 rpm 1.0

Flow rate L/min US gpm 0.2642

mL/rev cc/rev 1.0

Quantity To Convert

From Into Multiply By

Length mm in 0.03937

mm ft 0.003281

L US gal 0.2642

Volume L US qt 1.057

m3yd31.308

Weight kg lb 2.205

Force N kgf 0.10197

N lbf 0.2248

Torque N⋅mkgf⋅m 1.0197

N⋅mlbf⋅ft 0.7375

epcatalogs.com

SAFETY

RECOGNIZE SAFETY INFORMATION

• This is the SAFETY ALERT SYMBOL.

• When you see this symbol on your machine or in

this manual, be alert to the potential for personal

injury.

• Follow recommended precautions and safe

operating practices.

001-E01A-0688

SA-688

UNDERSTAND SIGNAL WORDS

• On machine safety signs, signal words designating

the degree or level of hazard - DANGER, WARNING,

or CAUTION - are used with the safety alert symbol.

• DANGER indicates an imminently hazardous

situation which, if not avoided, will result in death

or serious injury.

• WARNING indicates a potentially hazardous

situation which, if not avoided, could result in

death or serious injury.

• CAUTION indicates a potentially hazardous

situation which, if not avoided, may result in minor

or moderate injury.

DANGER or WARNING safety signs are located

near specific hazards. General precautions are

listed on CAUTION safety signs.

• Some safety signs don’t use any of the

designated signal words above after the safety

alert symbol are occasionally used on this

machine.

• CAUTION also calls attention to safety messages in

this manual.

• To avoid confusing machine protection with personal

safety messages, a signal word IMPORTANT

indicates a situation which, if not avoided, could

result in damage to the machine.

• NOTE indicates an additional explanation for an

element of information.

002-E01C-1223

SA-1223

SA-1

epcatalogs.com

SAFETY

FOLLOW SAFETY INSTRUCTIONS

• Carefully read and follow all safety signs on the

machine and all safety messages in this manual.

• Safety signs should be installed, maintained and re-

placed when necessary.

• If a safety sign or this manual is damaged or

missing, order a replacement from your author-

ized dealer in the same way you order other

replacement parts (be sure to state machine

model and serial number when ordering).

• Learn how to operate the machine and its controls

correctly and safely.

• Allow only trained, qualified, authorized personnel to

operate the machine.

SA-003

• Keep your machine in proper working condition.

• Unauthorized modifications of the machine may

impair its function and/or safety and affect ma-

chine life.

• The safety messages in this SAFETY chapter are

intended to illustrate basic safety procedures of

machines. However it is impossible for these safety

messages to cover every hazardous situation you

may encounter. If you have any questions, you

should first consult your supervisor and/or your au-

thorized dealer before operating or performing

maintenance work on the machine.

003-E01B-0003

SA-2

epcatalogs.com

Buy now

Hitachi Excavator Zaxis 110, 120, 125US, 135US, 135UR Workshop

Manual PDF

With Instant Download

Otros manuales para ZAXIS 110

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Excavador de Hitachi

Hitachi

Hitachi EX1900-6 Manual de usuario

Hitachi

Hitachi EX20UR-2 Manual de usuario

Hitachi

Hitachi ZX 670LC-5B Manual de usuario

Hitachi

Hitachi ZAXIS 470LC-5B Manual de usuario

Hitachi

Hitachi ZX170W-5A Manual de instrucciones

Hitachi

Hitachi EX80-5 Manual de usuario

Hitachi

Hitachi ZX70-3 Manual de instrucciones

Hitachi

Hitachi ZAXIS 17U-5N Manual de usuario

Hitachi

Hitachi EX5600-7B Manual de instrucciones

Hitachi

Hitachi ZAXIS 650LC-3 Manual de instrucciones

Hitachi

Hitachi ZX225USLC-5 Guía de inicio rápido

Hitachi

Hitachi 120-3 class Manual de usuario

Hitachi

Hitachi EX27U Manual de usuario

Hitachi

Hitachi ZAXIS 170W-3 Manual de usuario

Hitachi

Hitachi ZAXIS 135US-5B Manual de usuario

Hitachi

Hitachi Zaxis 330 Manual de usuario

Hitachi

Hitachi EX1200-7 Manual de instrucciones

Hitachi

Hitachi ZAXIS 135US-3 class Manual de usuario

Hitachi

Hitachi Zaxis 110M Manual de usuario

Hitachi

Hitachi ZX 40U-3 class Manual de usuario

Hitachi

Hitachi ZX 280-5G Manual de usuario

Hitachi

Hitachi ZAXIS 210W-3 Manual de usuario

Hitachi

Hitachi EX 8000-6 Manual de instrucciones

Hitachi

Hitachi Zaxis 330 Manual de instrucciones

Manuales populares de Excavador de otras marcas

Hyundai

Hyundai Robex 210LC-9 Manual de usuario

sennebogen

sennebogen 830 E Manual de usuario

Topcon

Topcon X-63 Manual de uso y cuidado

jcb

jcb 15c-1 Manual de usuario

Case

Case CX290B Manual de usuario

SUNWARD

SUNWARD SWE155F Manual

CNH

CNH CX16B Manual de usuario

Super Products

Super Products MUD DOG 700 Manual de usuario

Komatsu

Komatsu ecot3 WA200-6 Guía de instalación

New Holland

New Holland E57C Manual de usuario

Hyundai

Hyundai Robex 160LC-9 Manual de usuario

Doosan

Doosan DX180LC Guía de instalación

Hyundai

Hyundai HW65AH Manual de usuario

mecalac

mecalac 14 MBX Manual de usuario

CASE CONSTRUCTION

CASE CONSTRUCTION CX350C Manual de usuario

Hyundai

Hyundai Robex 140LC-9 Manual de usuario

Case

Case CX50B Manual de usuario

Kobelco

Kobelco SK210LC-9 Guía de instalación