Hitachi DKC710I-CBXA Manual de usuario

Hitachi Proprietary DKC710I

Rev.57 / Sep.2020, Jan.2021

DKC710I

Maintenance Manual

REV.9.9z8

Read and keep this manual

•Read safety instructions carefully and understand them

before starting your operation.

•Keep this manual at hand for reference.

Hitachi Proprietary DKC710I

Federal Communications Commission (FCC) Statement

Note: This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against such harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be required to correct the

interference at his own expense.

“EINE LEICHT ZUGÄNGLICHE TRENN-VORRICHTUNG, MIT EINER KONTAKT-

ÖFFNUNGSWEITE VON MINDESTENS 3mm IST IN DER UNMITTELBAREN NÄHE DER

VERBRAUCHERANLAGE ANZUORDEN (4-POLIGE ABSCHALTUNG).”

“Maschinenlarminformationsverordnung 3. GSGV, 18.01.1991: Der hochste Schalldruckpegel

betragt 70 dB(A) oder weniger gemas EN ISO 7779”

CLASS 1 LASER PRODUCT

Warning:

This is a Class A product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

Warnung:

Dies ist ein Produkt der Klasse A. In nichtgewerblichen Umgebungen können von dem

Gerät Funkstörungen ausgehen, zu deren Beseitigung vom Benutzer geeignete

Maßnahmen zu ergreifen sind.

Please use the supplied power cord. The power cord may not be used with other products.

CLASS 1 LASER PRODUCT

LASER KLASSE 1

警告使用者：

這是甲類的資訊產品，在居住的環境中使用時，可能會造成射頻

干擾，在這種情況下，使用者會被要求採取某些適當的對策。

Hitachi Proprietary DKC710I

Preface

This manual describes the maintenance of DKC710I Disk Subsystem, including installation and

replacement.

Before starting maintenance, read the manual carefully to be familiar with operating procedures and

instructions.

Particularly, be familiar with the Safety Section and obey its instructions.

Keep the manual on hand for your convenience.

The manual is copyrighted by Hitachi, Ltd. No part of the manual may be copied or reproduced in

any form or by any means without the prior permission of the publisher.

All information contained herein is subject to change without notice.

The screens described herein are the screens displayed by the Hitachi-generated SVP program

which runs on the Windows of the Microsoft Corporation.

MS-DOS : Registered trademark of the Microsoft Corporation in USA.

Windows : Registered trademark of the Microsoft Corporation in USA.

Windows Vista

: Registered trademark of the Microsoft Corporation in USA.

Windows 7: Registered trademark of the Microsoft Corporation in USA.

Internet Explorer

: Registered trademark of the Microsoft Corporation in USA.

ESCON : Registered trademark of the International Business Machines Corporation in USA.

ESCD : Registered trademark of the International Business Machines Corporation in USA.

IOCDS : Registered trademark of the International Business Machines Corporation in USA.

MVS : Registered trademark of the International Business Machines Corporation in USA.

OS/390 : Registered trademark of the International Business Machines Corporation in USA.

PPRC : Registered trademark of the International Business Machines Corporation in USA.

TSO : Registered trademark of the International Business Machines Corporation in USA.

Other company names and trade names described in the manual are trademarks or registered

trademarks of corresponding companies.

Hitachi Proprietary DKC710I

As for installation and de-installation procedure of nameplate of each option

The options other than those listed in Table 1 have not included a nameplate since May 2013.

Therefore, installation and de-installation procedures of nameplates instructed in the Maintenance

Manual are unnecessary when the options other than listed in Table 1 are installed or de-installed.

Table 1 Model List of Options That Include Nameplate

No. Model Number Model Name

1 DKC710I-CBXA Primary Controller Chassis

2 DKC710I-CBXG Primary Controller Chassis

3 DKC710I-CBXB Second Controller Chassis

4 DKC710I-CBXH Second Controller Chassis

5 DKC-F710I-UBX LFF Drive Chassis

6 DKC-F710I-SBX SFF Drive Chassis

7 DKC-F710I-SBXP SFF Drive Chassis Base

8 DKC-F710I-FBX Flash Module Drive Chassis

9 DKC-F710I-RK42 Rack

Hitachi Proprietary DKC710I

Rev.0 / Sep.2019

Correspondence information of function/GUI names difference between

medels

This manual describes the maintenance for DKC710I Disk Subsystem.

When using for maintenance for P9500 Disk Subsystem, use the corresponding function/GUI

names listed below.

Table 2Correspondence information of function/GUI names difference between medels

No.

DKC710I

P9500

Compatible FlashCopy(R) V2

Compatible FlashCopy

Compatible Software for IBM(R) FlashCopy(R) SE

Compatible FlashCopy SE

Copy-on-Write Snapshot

Snapshot

COW Snapshot

THP

Smart

Dynamic Provisioning

Thin Provisioning

FCv2

FC Z

Multi-Tier Pool

Smart Pool

Nondisruptive Migration

Online Data Migration

Serial Number

Full Serial Number

Server Priority Manager

Performance Control

ShadowImage

Business Copy

SIMF

BC Z

SNMP Information

SNMP IP Security

Storage Navigator

Remote Web Console

RWC

Thin Image

Fast Snap

TrueCopy

Continuous Access Synchronous

Universal Replicator

Continuous Access Journal

Volume Migration

Auto LUN

Volume Retention Manager

Volume Retention

Hitachi Proprietary DKC710I

CONTENTS

SAFETY

1. START

2. OPTION & MICROVERSION

3. MICRO-FC

4. THEORY OF OPERATION

5. LOCATION

6. INSTALLATION

7. SVP

8. WEB CONSOLE

9. DIAGNOSIS

10. ACC (ACTION CODE)

11. SIM-RC

12. SSB

13. SSBLOG

14. TROUBLE SHOOTING

15. REPLACE

16. SVP MESSAGE

17. PERIODIC CHECK

18. EASY MAINTENANCE

19. PARTS CATALOG

20. GLOSSARY

Hitachi Proprietary DKC710I

REV00-10

REVISION CONTROL OF DKC710I MAINTENANCE MANUAL

REV. DATE. REVISED SHEET DESCRIPTION

SHEET REV.

0Sep.2010

— — Original Edition

Hitachi Proprietary DKC710I

REV00-20

REVISION CONTROL OF DKC710I MAINTENANCE MANUAL

REV. DATE. REVISED SHEET DESCRIPTION

SHEET REV.

1Oct.2010

SAFETY02-30 1 Correction

START02-10 1

MICRO00-10 1

MICRO03-110 1

MICRO04-140,220 1

THEORY00-130 1

THEORY02-40 1

THEORY02-61 0

THEORY02-70 1

THEORY03-13-70,80 1

THEORY03-14-70,130 1

THEORY05-1340,1350 0

LOC01-10 1

LOC03-140 1

LOC05-90 1

LOC06-50 1

INST00-30,40,50 1

INST01-20,230,240 1

INST02-10,40,60,70 1

INST03-01-120,140,141,150,160 1

INST03-03-10,50,70 1

INST03-03-80,90 0

INST03-04-110 1

INST03-04-111 0

INST03-05-11,20,30,140,350,433 1

INST03-05-435 0

INST03-05-440 through 444 1

INST03-05-445,446,447,448 0

INST03-07-110,120,150 through 280,300,310,

320,340,360,370,380,390 1

INST03-08A-110,120 1

INST03-08B-120,130 1

INST03-09-10 1

INST03-12C-10,50 1

INST03-12C-51 0

Hitachi Proprietary DKC710I

REV00-30

REVISION CONTROL OF DKC710I MAINTENANCE MANUAL

REV. DATE. REVISED SHEET DESCRIPTION

SHEET REV.

1Oct.2010

INST03-12C-60 through 3610,5090,5130,5150 1 Correction

INST03-13-160,190,240,260,280,290,310,470 1

INST04-01-80 1

INST04-01C-51 0

INST04-01C-4270 1

INST04-02-10,20,30,80 through 84 1

INST04-02-85,86,87,88 0

INST04-02-90,180,250,260 1

INST04-02-270 0

INST04-04A-130 1

INST04-04B-130 1

INST04-06-100,180 1

INST04-08-10 through 70 1

INST04-08-80,90 0

INST04-10-30 1

INST05-100 1

SVP01-50,60,90,170,180,190 1

SVP03-390 1

DIAG06-81,110,130,170,190 1

SIMRC02-60,451,540,680,690 1

TRBL00-30 1

TRBL03-20 1

TRBL05-930,940 0

REP01-240 1

REP02-01-20 1

REP03-01-121,130,140,160 1

REP03-02-171,180,190,210 1

REP03-03-131,140,150,170 1

REP03-04-201,210 1

REP03-04-211 0

REP03-04-220,260 1

REP03-05-131,140 1

REP03-05-141 0

REP03-05-150,160 1

REP03-10-50,60,80,130,150,190,200,240,250 1

Hitachi Proprietary DKC710I

REV00-40

REVISION CONTROL OF DKC710I MAINTENANCE MANUAL

REV. DATE. REVISED SHEET DESCRIPTION

SHEET REV.

1Oct.2010

REP03-11-40,41 1 Correction

REP03-11-42 0

REP03-11-50,90,130,140,150 1

REP03-12-80,90,100 1

REP03-12-101 0

REP03-12-110,140,150 1

REP03-13-80,90,120,150,160,170 1

REP03-14-70,80,90,110,150,170 1

REP03-15-40 1

REP03-15-41 0

REP03-15-50,60,70,110 1

REP03-17-70 1

REP03-20-180,220,270,290,310,320,340,500,

740 1

REP03-21-60 1

REP03-22-70 1

REP03-26-40 1

REP03-26-41 0

REP03-26-50,60,130 1

REP03-27-40 1

REP03-27-41 0

REP03-27-50,60 1

REP03-27-101 0

REP03-27-110,120,130 1

REP03-27-131 0

REP03-28-91 1

REP03-29-90 1

REP03-32-90 1

REP03-33-90 1

REP04-01-30 1

SVPMSG03-890 1

PARTS02-10 through 110 1

PARTS05-20 1

PARTS06-10 1

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Accionamiento de CC de Hitachi

Hitachi

Hitachi WJ200-001S Manual de usuario

Hitachi

Hitachi WJ200 Series Software Manual de usuario

Manuales populares de Accionamiento de CC de otras marcas

Vincent Associates

Vincent Associates UNIBLITZ ED12DSS Manual de usuario

EKSMA OPTICS

EKSMA OPTICS DQ-100-4 Manual de lista de piezas

Chamberlain Garog

Chamberlain Garog D Series Manual de usuario

Parker

Parker PDS Series Manual de usuario

Festo

Festo DGC G Series Guía de configuración

Binks

Binks QS-5012-1-CE Manual de usuario

Danfoss

Danfoss VLT 2800 Series Hoja de especificaciones

ABB

ABB ACQ580-01 Series Manual de instalación

YASKAWA

YASKAWA CANopen SI-S3 Manual de usuario

GE D20A6 Manual de usuario

Unex

Unex MC-D-250-1000-050W-TW Manual de usuario

Geckodrive

Geckodrive G213V Manual de usuario

ABB

ABB RSYC-01 Manual de usuario

Rockwell Automation

Rockwell Automation PowerFlex 700S Manual del propietario

WEG

WEG DeviceNet CFW500 Manual de usuario

Siemens

Siemens SINAMICS G Hoja de datos

Siemens

Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Instrucciones de funcionamiento

SOMFY

SOMFY JR RU 30 Manual de usuario