Hisense RS-47WL Manual de usuario
Refrigerator
Service manual
NO FROST
Model: RS-47WL* BC-355WY
NOTE: product specifications are subject to change.
1
Contents
Warnings and precautions for safety............................................................................................................................ 2
Parts Description.......................................................................................................................................................... 3
Circuit diagram basic features ..................................................................................................................................... 4
Cooling diagram.......................................................................................................................................................... 5
Display controls........................................................................................................................................................... 6
Filling the water tank................................................................................................................................................... 7
Receiving water from the water dispenser................................................................................................................... 8
Checking the Compressor............................................................................................................................................ 8
Checking the defrost fuse .......................................................................................................................................... 10
Checking the Heater .................................................................................................................................................. 10
The guide for Disassembly Common parts of Refrigerator………………………………………………………...11
◆The instruction of replacing the main board and display board..............................................................................11
◆The instruction of of replacing fan motor...............................................................................................................11
◆The instruction of replacing temperature sensor.................................................................................................... 12
◆The instruction of replacing evaporator temperature sensor and temperature fuse and heater.............................. 13
◆The instruction of replacing PTC Starting relay and Overload protector. ............................................................. 13
◆The instruction of replacing Door switch. ............................................................................................................. 14
◆The instruction of replacing Display board. .......................................................................................................... 14
◆The instruction of of replacing lamp...................................................................................................................... 15
Installing your new appliance.................................................................................................................................... 16
Troubleshooting......................................................................................................................................................... 20
◆The solution for digital display code problem..................................................................................................... 20
◆The common problem judgement method........................................................................................................... 20
◆The solution for the common problem................................................................................................................. 22
■NOTE: ............................................................................................................................................................... 24
2
Warnings and precautions for safety
Please observe the following safety precautions in order to use safely and correctly the refrigerator
and to prevent accident and danger during repair.
1. Be care of an electric shock. Disconnect power cord from wall outlet and wait for more than
three minutes before replacing PCB parts.
Shut off the power whenever replacing and repairing electric components.
2. When connecting power cord, please wait for more than five minutes after power cord was
disconnected from the wall outlet.
3. Please check if the power plug is pressed down by the refrigerator against the wall.
If the power plug was damaged, it may cause fire or electric shock.
4. If the wall outlet is over loaded, it may cause fire.
Please use its own individual electrical outlet for the refrigerator.
5. Please make sure the outlet is properly earthed, particularly in wet or damp area.
6. Use standard electrical components when replacing them.
7. Make sure the hook is correctly engaged.
Remove dust and foreign materials from the housing and connecting parts.
8. Do not fray, damage, machine, heavily bend, pull out or twist the power cord.
9. Please check the evidence of moisture intrusion in the electrical components.
Replace the parts or mask it with insulation tapes if moisture intrusion was confirmed.
10. Do not touch the icemaker with hands or tools to confirm the operation of geared motor.
11. Do not let the customers repair, disassemble and reconstruct the refrigerator for themselves.
It may cause accident, electric shock, or fire.
12. Do not store flammable materials such as ether, benzene, alcohol, chemicals, gas, or
medicine in the refrigerator.
13. Do not put flower vase, cup, cosmetics, chemicals, etc., or container with full of water
on the top of the refrigerator.
14. Do not put glass bottles with full of water into the freezer.
The contents shall freeze and break the glass bottles.
15. When you scrap the refrigerator, please disconnect the door gasket first and scrap it
3
Parts Description
4
Circuit diagram basic features
Basic features
Voltage / frequency （
V/Hz
）220-240V~ 50HZ
Net capacity l RC-72W
Net capacity fridge compartmen (Fridge/Chill) l 355L
Energy efficiency class A+
Climate class (SN=10~32°C, N=16~32°C,
ST=16~38°C, T=16~43°C) SN、N、ST、T
Freezer compartment star rating 4 Star
Energy consumption / year kWh/year 165
Energy consumption (ISIRI 4853-2) per 24 h kWh/24 h 0.452
Compressor （W）220V,165W
PTC starter （
V/
Ω）220V ,15±20%Ω
Overload protector (Turn off/Turn on) °C 120±5°C/ 61±9°C
Heater （
V/
W/Ω）
220V,120W±10%
403Ω±10%
LED Light （
V/
W）12V，1W
fan motor （
V/
W）13V，2W
Max noise level dB(A) ≤40
Kind of coolant / Charge (R134a/R600a) / R / g R600a/46
5
grammes
Net weight kg 69
Gross weight kg 77
W x D x H (appearance) mm 595×712×1855
W x D x H (packaging) mm 643×713×1945
Cooling diagram
6
Display controls
7
Filling the water tank
Turn the small cap anticlockwise then remove it from the water tank. Fill drinking water into the
water tank through the hole.
8
•Do not fill above the level, otherwise, it may overflow.
•Before filling with water, ensure that the water tank is steady and in a correct position.
•Apart from drinking water, other beverages (such as milk, juice, carbonated beverage, etc)
are not suggested to be used, especially beverages that include grain must not be used
(may result in blockage and damage).
•Hot water must not be filled into the water tank directly.
•Do not touch other parts of the unit when filling water, it may lead to leakage.
Receiving water from the water dispenser
•You should use the type of container that can fit
under the water dispenser. Place the container
properly underneath and push on the lever for water to flow.
•Before you dispense the water, make sure the lock device is at “Unlock”position.
Ensure to slide to “Lock”position after each use to prevent children from playing with the lever.
•When at “Lock”position, do not push on the lever with force. It will damage the mechanism.
Checking the Compressor
Use a multi-meter to test the resistance between C & M, C&S and S&M :
Normal range of C&M :About 10-21Ω
9
Normal range of C&S :About 10-27Ω
Normal range of S&M : About 20-50Ω
If the test result is not in this range then it means the inner coil has some problem and the compressor
can not work properly.
Compressor Protector test ——
Use a multi-meter to test the resistance between the two end as the pic show :
If there show 000 or almost 0 then it is OK.
If there is no response then it is broken.
Compressor PTC starter test ——
Use a multi-meter to test the resistance between the two end as the pic show :
If there show the number is betweenAbout 9-25Ωthen it is OK.
If there show 000 or no response then it is broken.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Refrigerador de Hisense
Hisense
Hisense HR6TFF534SD Instrucciones de montaje
Hisense
Hisense RT417N4DD1 Instrucciones de montaje
Hisense
Hisense RL462N4WC1 Instrucciones de montaje
Hisense
Hisense RD-43WR4SHD/BVA-001 Instrucciones de montaje
Hisense
Hisense RS-15DR Manual de usuario
Hisense
Hisense HRCD609B Instrucciones de montaje
Hisense
Hisense RQ515N4AD1 Instrucciones de montaje
Hisense
Hisense RR106D4CBF Instrucciones de montaje
Hisense
Hisense RD-44WC series Manual de usuario
Hisense
Hisense RS-11DC4SB Instrucciones de montaje
Hisense
Hisense RF702N4IS1 Instrucciones de montaje
Hisense
Hisense WMS017M6XVE Instrucciones de montaje
Hisense
Hisense RB372N4CC2 Instrucciones de montaje
Hisense
Hisense RB372N4ADE Instrucciones de montaje
Hisense
Hisense BCD-264R Instrucciones de montaje
Hisense
Hisense RT749N4ABVI Instrucciones de montaje
Hisense
Hisense RQ563N4AI1 Instrucciones de montaje
Hisense
Hisense HR6AF351B Instrucciones de montaje
Hisense
Hisense FV14D6AWD Instrucciones de montaje
Hisense
Hisense RD-50WC4SYS Manual de usuario
