Hillyard TRIDENT XM13SC Manual de usuario
SERVICE MANUAL
TRIDENT XM13SC
Version: AB
Date: October 4, 2017
Document Number:10055555
Contents
I Product Introduction 4
1 Serial Number and Technical Support 5
1.1 The Serial Tag ................................. 5
1.2 Serial Tag location ............................... 5
2 Main Technical Features 6
II Anomalies Resolution Guide 7
3 Troubleshooting Guide 8
3.1 Basic Guide ................................... 8
3.2 Advanced Guide ................................ 13
4 Disassembling Procedures 19
4.1 Electrical Installation ............................. 20
4.2 Mechanical Friction System ......................... 22
4.3 Drying System ................................. 23
4.4 Frame and Traction System ......................... 24
4.5 Solution Delivery System ........................... 25
III Machine Description 26
5 Electrical System 27
5.1 Structure .................................... 27
5.2 Description ................................... 27
5.3 Location of Electrical components ...................... 28
5.4 Maintenance and Checks ........................... 32
5.5 Programming .................................. 33
5.6 Alarm Table ................................... 36
5.7 Menu tables ................................... 37
6 Mechanical Rubbing System 40
6.1 Structure .................................... 40
6.2 Description: ................................... 40
6.3 Maintenance and checks ........................... 41
2
7 Drying System 43
7.1 Structure .................................... 43
7.2 Description ................................... 43
7.3 Adjustments .................................. 44
7.4 Maintenance and Checks ........................... 44
8 Machine Frame and Traction System 47
8.1 Structure .................................... 47
8.2 Description ................................... 47
8.3 Maintenance and Checks ........................... 47
9 Cleaning Solution Supply System 48
9.1 Structure .................................... 48
9.2 Description: ................................... 48
9.3 Maintenance and Checks ........................... 49
10 Consumable & Recommended Spare Parts 50
10.1Consumable Spare Parts ........................... 50
10.2Recommended Spare Parts .......................... 51
3
Part I
Product Introduction
4
Chapter 1
Serial Number and Technical Support
1.1 The Serial Tag
1.2 Serial Tag location
To have access to the Serial Tag it is sufficient to remove both tanks.
The Serial Number is an extremely important information which has to be provided
each time a Technical Support is required or is necessary to buy spare parts or
accessories. The serial number is the only way to identify the machine by model,
production date type equipments in general.
5
Chapter 2
Main Technical Features
Technical Data
TECHNICAL DESCRIPTION U/M XM13SC
Working Width in 11
Working Capacity, up to ft2
h9687
Brush Diameter/Revolutions φin-rpm 11-150
Brush Motor Voltage/Power V-W 36-90
Max Weight on brush lb 22
Total Power W 255
Squeegee Width in 12,8
Solution Tank gal 0,8
Recovery Tank gal 1
Vacuum Motor Voltage/Power V-W 36-150
Machine Length (Handlebar Up - Down) in 21,8-35,2
Machine Height (Handlebar Up - Down) in 41,3-13,8
Machine Width in 14,8
Sound pressure level (ISO 11201) LpA dB (A) ≤76
Hand vibration level (ISO 5349) m
s2≤2.5
Weights and Pressures1
TECHNICAL DESCRIPTION U/M XM13SC
Machine Weight (Machine + Brush + Squeegee) lb 40
Gross Weight of the machine in work conditions
(Machine + Battery+ Water + Brush + Squeegee)
lb 50
1Weight and Pressures depends on how much water there is in the tanks.
6
Part II
Anomalies Resolution Guide
7
Chapter 3
Troubleshooting Guide
3.1 Basic Guide
3.1.1 Electrical system: what to do if. . .
The machine doesn’t switch on
1. The main switch is not pushed ⇒Push the main switch.
2. The battery doesn’t work properly ⇒Refer to the proper section (see section
3.1.1 at page 8).
3. The problem is not solved ⇒Refer to the Advanced Guide (see section
3.2.2 at page 14).
The battery don’t work properly
1. The battery is not properly con-
nected
⇒Insert the battery until the end posi-
tion clicks.
2. The battery is discharged ⇒Perform a complete charge cycle.
3. The battery is faulty ⇒Refer to the Advanced Guide (see section
3.2.3 at page 15).
4. The battery charger doesn’t work ⇒Check the proper section (see section 3.1.1
at page 8).
8
The battery charger doesn’t work
1. The battery charger is not con-
nected to the power supply
⇒Connect the charger to a supplied
electric socket.
2. The charger has the power switch
in position 0
⇒Move the power switch in position 1.
3. The battery charger has the Red
LED blinking
⇒The battery charger is in error con-
ditions, verify the alarm tables and
solve the issue by following the re-
lated instructions (see section 5.3.5 at page
32).
4. The battery charger plugged in and
turned on does not activate the
Green LED (electrical continuity)
⇒Replace the battery charger.
5. The battery charger plugged in and
turned on with battery inserted
does not activate the Red LED
(charging)
⇒Make sure the battery is properly
positioned inside the slot and the
terminals have a good contact.
The battery may be already
charged.
The display shows an alarm message
1. The display shows an alarm mes-
sage
⇒Check what alarm message is
shown and solve the related issue
by following the proper instructions
(see section 5.6.1 at page 36).
The machine has a very limited working autonomy
1. The battery is discharged ⇒Perform a complete charge cycle.
2. The battery have been working for
several cycles
⇒Replace the battery.
9
3.1.2 Mechanical scrubbing system: what to do if. . .
The machine doesn’t clean well
1. The machine is switched off ⇒Switch on the machine.
2. The machine doesn’t switch on ⇒Refer to the proper section (see section
3.1.1 at page 8).
3. The display shows an alarm mes-
sage
⇒Check what alarm message is
shown and solve the related issue
by following the proper instructions
(see section 5.6.1 at page 36).
4. The switch ”Auto” is not pressed ⇒Press the ”Auto” switch.
5. The brush motor is not working ⇒Refer to the Advanced Guide (see section
3.2.5 at page 16).
6. The brush is not properly engaged ⇒Release and engage properly the
brush.
7. The solution flow rate is not correct
or not enough
⇒Refer to the proper section (see section
3.1.4 at page 12).
8. The detergent doesn’t fit the type of
dirt
⇒Replace the detergent with a proper
one.
10
Otros manuales para TRIDENT XM13SC
1
Tabla de contenidos
Otros manuales de Máquina de piso de Hillyard
Hillyard
Hillyard Trident EX8 Manual de usuario
Hillyard
Hillyard TRIDENT T26 SC PLUS Manual de usuario
Hillyard
Hillyard TRIDENT T26SC PLUS Manual de usuario
Hillyard
Hillyard TRIDENT EX12 Manual de usuario
Hillyard
Hillyard TRIDENT EX7 Manual de usuario
Hillyard
Hillyard Trident BU1500 Manual de usuario
Hillyard
Hillyard TRIDENT EX20 Manual de usuario
