HIK VISION HiWatch Series Manual de usuario

Network Video Recorder

Quick Start Guide

Network Video Recorder Quick Start Guide

Legal Information

About this Manual

The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other

information hereinafter are for description and explanation only. The information contained in the Manual is

subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the

company website (https://www.hi-watch.eu/).

Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.

Trademarks

and other Hikvision’s trademarks and logos are the properties of Hikvision in various jurisdictions.

Other trademarks and logos mentioned below are the properties of their respective owners.

: The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are

trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH

ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”.

HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,

SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR

OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR

INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS

INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED

ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION

WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES

OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION

SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES

RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS;

HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY

RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE

RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD

PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA

PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES,

INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR

PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY

NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.

Network Video Recorder Quick Start Guide

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

FCC compliance: This product has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This product generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this product does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired

operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked with "CE" and comply

therefore with the applicable harmonized European standards listed under the EMC Directive

2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as

unsorted municipal waste in the European Union. For proper recycling, return this product to

your local supplier upon the purchase of equivalent new equipment, or dispose of it at

designated collection points. For more information see: www.recyclethis.info

2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as

unsorted municipal waste in the European Union. See the product documentation for specific

battery information. The battery is marked with this symbol, which may include lettering to

indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier

or to a designated collection point. For more information see: www.recyclethis.info

Industry Canada ICES-003 Compliance

Network Video Recorder Quick Start Guide

iii

This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the

following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired

operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils

radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d'en compromettre le fonctionnement.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a

type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce

potential radio interference to other users, the antenna type and its gain should be so chosen that

the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful

communication.

Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut

fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour

l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à

l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la

puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à

l'établissement d'une communication satisfaisante.

This equipment should be installed and operated with a minimum distance 20cm between the

radiator and your body.

Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre

corps.

Network Video Recorder Quick Start Guide

Applicable Model

This manual is applicable to the following models.

Table 1-1 Applicable Model

Series

Model

HWN-2100MH-W

HWN-2104MH-W

HWN-2108MH-W

HWN-2100MH-W(C)

HWN-2104MH-W(C)

HWN-2108MH-W(C)

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Danger

Indicates a hazardous situation which, if not avoided, will or could

result in death or serious injury.

Caution

Indicates a potentially hazardous situation which, if not avoided,

could result in equipment damage, data loss, performance

degradation, or unexpected results.

Note

Provides additional information to emphasize or supplement

important points of the main text.

Network Video Recorder Quick Start Guide

Safety Instruction

●Proper configuration of all passwords and other security settings is the responsibility of the

installer and/or user.

●In the use of the product, you must be in strict compliance with the electrical safety regulations

of the nation and region. Please refer to technical specifications for detailed information.

●Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power

Source with 100 VAC to 240 VAC or 12 VDC according to the IEC60950-1 standard. Please refer

to technical specifications for detailed information.

●Do not connect several devices to one power adapter as adapter overload may cause over-

heating or a fire hazard.

●Please make sure that the plug is firmly connected to the power socket.

●If smoke, odor or noise rises from the device, turn off the power at once and unplug the power

cable, and then please contact the service center.

Preventive and Cautionary Tips

Before connecting and operating your device, please be advised of the following tips:

●Ensure recorder is installed in a well-ventilated, dust-free environment.

●Recorder is designed for indoor use only.

●Keep all liquids away from the device.

●Ensure environmental conditions meet factory specifications.

●Ensure recorder is properly secured to a rack or shelf. Major shocks or jolts to the recorder as a

result of dropping it may cause damage to the sensitive electronics within the recorder.

●Use the device in conjunction with an UPS if possible.

●Power down the recorder before connecting and disconnecting accessories and peripherals.

●A factory recommended HDD should be used for this device.

●Improper use or replacement of the battery may result in hazard of explosion. Replace with the

same or equivalent type only. Dispose of used batteries according to the instructions provided

by the battery manufacturer.

●When installing the device into a cabinet over 2U height, it is suggested to use rack shelf to bear

the weight. If the cabinet height is over 4U, it is suggested to use slide rails or rack shelf to bear

the weight.

Network Video Recorder Quick Start Guide 
vi 
TABLE OF CONTENTS 
Chapter 1 Rear Panel Interfaces Description ...............................................................................7 
Chapter 2 Installation and Connections ......................................................................................8 
1 Device Installation.................................................................................................................8 
2 HDD Installation ....................................................................................................................8 
2.1 Fix-on-Bottom Installation.........................................................................................8 
Chapter 3 Menu Operation.......................................................................................................10 
1 Startup, Shutdown and Reboot ..........................................................................................10 
2 Activate Your Device ...........................................................................................................10 
3 Set Unlock Pattern...............................................................................................................11 
4 User Login ............................................................................................................................12 
5 Network Settings.................................................................................................................13 
5.1 Configure General Settings ......................................................................................13 
5.2 Configure Wi-Fi.........................................................................................................13 
5.3 Configure Hik-Connect .............................................................................................15 
6 Add Network Cameras ........................................................................................................16 
6.1 Add Wi-Fi Cameras ...................................................................................................16 
6.2 Add IP Cameras ........................................................................................................16 
7 Live View..............................................................................................................................17 
8 Playback...............................................................................................................................17 
9 Access via Web Browser .....................................................................................................18 
 

Chapter 1 Rear Panel Interfaces Description

The rear panel interfaces vary with different models. Refer to the following table for common

interfaces description.

Table 1-1 Common Interfaces Description of Rear Panel

Item

Description

Item

Description

AUDIO IN

RCA connector for audio

input.

AUDIO OUT

RCA connector for audio

output.

LINE IN

RCA connector for two-way

audio input.

USB

Universal Serial Bus (USB)

interface for additional device.

VGA

DB15 connector for local

video output and menu

display.

HDMI

HDMI interface for video

output.

RS-485

RS-485 serial interface for

pan/tilt unit, speed dome, etc.

RS-232

RS-232 interface for

parameter configuration, or

transparent channel.

LAN

RJ-45 self-adaptive Ethernet

interface.

eSATA

Storage and expansion

interface for record or backup.

ALARM

IN/OUT

Alarm input/output interface.

GND

Ground.

Power Switch

Switch for turning on/off the

device.

Power Supply

100 to 240 VAC, 48 VDC, or 12

VDC power supply, different

models vary.

Wi-Fi antenna interface.

Chapter 2 Installation and Connections

2.1 Device Installation

During the device installation:

●Use brackets for rack mounting.

●Ensure ample room for audio and video cables.

●When routing cables, ensure the bend radius of the cables are no less than five times of its

diameter.

●Allow at least 2 cm (≈0.75 inch) of space among racks mounted devices.

●Ensure the device is grounded.

●Environmental temperature should be within the range of -10 °C to 55 °C (14 °F to 131 °F).

●Environmental humidity should be within the range of 10% to 90%.

2.2 HDD Installation

Disconnect the power from the device before installing a hard disk drive (HDD). A factory

recommended HDD should be used for this installation.

Tools Required: Screwdriver.

2.2.1 Fix-on-Bottom Installation

Fix-on-bottom installation is applicable when you need to install and fix the HDD on the device

bottom.

Steps

1. Remove the cover from device by unfastening the screws on panels.

Figure 2-1 Remove Cover

2. Connect the data cable and power cable.

1) Connect one end of data cable to the device motherboard.

2) Connect the other end of data cable to HDD.

3) Connect one end of power cable to HDD.

4) Connect the other end of power cable to the device motherboard.

Figure 2-2 Connect Cables

3. Set the device up, match HDD screw threads with the reserved holes on the device bottom, and

fix HDD with screws.

Figure 2-3 Fix HDD to Device Bottom

4. Optional: Repeat the steps above to install other HDDs.

5. Reinstall the device cover and fasten screws.

Otros manuales para HiWatch Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Hardware de red de HIK VISION

HIK VISION

HIK VISION DS-7600NI Series Manual de usuario

HIK VISION

HIK VISION EKI-K82T46 Manual de usuario

HIK VISION

HIK VISION HIK-7104NI Manual de usuario

HIK VISION

HIK VISION iDS-9664NXI-M8/X Manual de usuario

HIK VISION

HIK VISION LTN07128/256 Manual de usuario

HIK VISION

HIK VISION DS-MP7608HN Series Manual de usuario

HIK VISION

HIK VISION 7604NI-K1B Manual de usuario

HIK VISION

HIK VISION HWN-4116MH Manual de usuario

HIK VISION

HIK VISION DS-9608NI-ST Series Manual de usuario

HIK VISION

HIK VISION NVST HNR Series Manual de usuario

HIK VISION

HIK VISION DS-7716NXI-I4/16P/4S Manual de usuario

HIK VISION

HIK VISION DS-7100NI-Q1 Series Manual de usuario

HIK VISION

HIK VISION ICVS Manual de usuario

HIK VISION

HIK VISION DS-96128NI-H16DS-96128NI-H16/HDS-96128NI-H16/IDS-96128NI-H16/H/IDS-96128NI-F16DS-96128NI-F16/HDS-96128NI-F16/IDS-96128NI Manual de usuario

HIK VISION

HIK VISION UD.6L0202B1194A01 Guía del usuario

HIK VISION

HIK VISION DS-8600NI-8 Guía del usuario

HIK VISION

HIK VISION DS-96000NI-M8 Series Manual de usuario

HIK VISION

HIK VISION DS-3WF Series Manual de usuario

HIK VISION

HIK VISION DS-9600NXI-I8/S Series Manual de usuario

HIK VISION

HIK VISION UD.6L0202B1954A01 Guía del usuario

HIK VISION

HIK VISION iDS-96000NXI-I16B Series Manual de usuario

HIK VISION

HIK VISION DS-7716NI-I4/16P Manual de usuario

HIK VISION

HIK VISION DS-76xxNI-Ex/xP Manual de usuario

HIK VISION

HIK VISION DS-3WF03C Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario